AutoCAD Civil 3D :: Field For Viewport Showing XREF Scale First
May 7, 2013
I've got a drawing that contains an XREF. I've got a field reading the viewport object's Custom scale>Use scale name. However, whenever the drawing is loaded up all of the XREF's scales get imported. Since they contain the same scales, the field changes to read the XREF scale instead of the one it was set to. They are the same scale, but the field reads the XREF one first. Here is a screenshot showing what I'm talking about. Notice that the viewport's properties never show the scale as 1:20_XREF, but the field does.
I've been having to click "show all scales", do a SCALELISTEDIT, remove the XREFs, then do a UPDATEFIELD. I have to do this every time the drawing is open. It stays that way until C3D is closed. This becomes a problem when I go to PUBLISH a sheet set. If I haven't opened all the sheets in the sheet set and changed the scale list then they all get the wrong scale list shown.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 7 Replies
ADVERTISEMENT
Oct 16, 2013
How would I go about inserting a field in modelspace that indicates the scale of a viewport. I only have one viewport.
View 5 Replies
View Related
Oct 31, 2011
I have been through all of the system variable field sources but cannot find one that stores the scale of a viewport. I want to add a field to my drawings that prints the viewport scale and updates it automatically if and when I change the scale.
View 3 Replies
View Related
Jun 26, 2009
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
View 9 Replies
View Related
Nov 8, 2013
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
View 3 Replies
View Related
Nov 20, 2012
I am having problems bringing in an xref dwg in a viewport. The scale for my stationing labels are huge and I cant remember how to fix it.
View 8 Replies
View Related
Jan 10, 2013
I have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
View 4 Replies
View Related
Nov 2, 2012
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 2 Replies
View Related
Jun 26, 2012
I attach an xref to a drawing, plan profile, and align the parts of the xref in each viewport the way I want them to appear.
The host drawing is a generic plan profile sheet border. The viewports are set to the same scale same annotative scale, and are undefined, not a plan or profile viewport. I save the drawing and get out of cad all together. I restart cad and open the drawing. The plan view viewport is visible and the xrefs are also. In the profile viewport nothing is visible or only one line is visible. Items in the view port are viewable, not frozen in the viewport, not turned of. The annotative scale is exactly the same for all viewports as is the xref drawing.I am xrefing a civil 3d 2011 aliment and profile drawing into these sheets. The only way to see the xref in the view ports is to detach and reattach the xref. To make things worse this does not happen to all drawings that are using the border that I used to create this drawing set.
View 3 Replies
View Related
Apr 26, 2013
In c3d 2013 in the layout tabs when I hover over the annotation scale for the viewport it automatically changes the viewport like a "preview" of that scale. Is there a way to shut that off?
I ask because I believe it is altering my annotative point descriptions so I have to regen everytime my scale changes to see if the scale will work or not. A co-workers computer doesn't seem to preview and it works fine on their computer my preview appears to mess the annotation up on mine.
View 1 Replies
View Related
Apr 30, 2013
I double click in the viewport; under misc the annotated scale is in the list but not the standard scale. I want to set the scale for the viewport. Why doesn't the standard scale show as on option? Or, how to I set the scale in my viewport?
I'm using autocad LT 2008
View 6 Replies
View Related
Apr 11, 2013
Running 2013 SP 1, HF3.
So I made viewframes in my base file which I then xrefed my base file into my sheet file. In my sheet file, the viewframes are no where to be seen. The layer is on, set to plot, has an off color so I know I should see them.
Also if I data reference them in they again do NOT show up. But I can do a Zoom to and I end up at 0,0.
View 1 Replies
View Related
Nov 28, 2012
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies
View Related
Feb 4, 2013
In paperspace the text are so out of scale and it only shows a specific area of the model view.the other viewports will have a realistic and 2d wireframe.
View 5 Replies
View Related
Sep 24, 2009
I am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
View 7 Replies
View Related
Jan 22, 2013
The properties palatte has both these scales listed. In theory, they can be different.I would love to be able to plot my drawing at 1:1000 with the civil objects & labels scaled to 1:500 so they don't overwhelm the plan. It would seem I should be able to simply set the viewport to have a standard scale of 1:1000 and annotation scale 1:500 and be done. But it doesn't work. It will always scale the annotative objects to the standard scale.
My workaround is to scale my sheet double size and plot it half size, to trick the Civil objects & labels.
View 2 Replies
View Related
Nov 7, 2012
I have a drawing that is 50 scale. However my sections are all 10 scale. When I set my viewport to 10 scale, all my text is tiny. I can go into the style of the section view and change the size, but then it's too large in model space. Nothing I've tried will change the size of my text in paperspace.
Win 7 64BIT
C3D 2013
View 8 Replies
View Related
Apr 26, 2012
When I maximize a view port, then zoom in or out, the note labels change scale. I like the way C3D General Note Labels rotate and scale with different viewports, but is there a way to stop them from changing when you are just viewing by maximizing? I know that I can zoom first, then maximize and as long as I don't zoom again, the scale won't change, but this is not practical.
Win 7 64BIT
C3D 2013
View 1 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
Nov 26, 2012
I have some files that are difficult to work with. Every time I try to change the annotation scale of an existing viewport or create a new viewport and set the annotation scale equal to something other than the default 1"=40' the file fatal errors on me.
Oh, Im on Windows XP 64 (8gb Ram and a Xeon) running C3D 2011 (all service packs and updates applied).
View 3 Replies
View Related
Mar 29, 2011
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
View 2 Replies
View Related
Sep 6, 2013
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies
View Related
Oct 19, 2011
Is there way get field object att in xref ?
View 3 Replies
View Related
Feb 22, 2013
I'm trying to create a field in a block (titleblock) that will automaticly update when I change the viewportscale.It's mostly only 1 viewport, sometimes a second of even 3rd but, they are not important to the titleblock.
I've read aboud fields and diesel expressions. I've tried and it works. there is only 1 problem,It only works with the object (when field expresssion, object, custom scale) in this case the viewport pressent at that time.
When i use the same field with the same expressions, it does not recognize the viewport/object.Is there a way to make the field, diesel expression or even something else, work without it's need for a
object name. Perhabs that the expression gets the viewportname from a lisp, something like: (setq ss(ssget "X")) ;some thing like this Can it be done?
View 8 Replies
View Related
Jul 21, 2011
We created a field that is grabbing an object, the property of the object is the standard scale. Fields will not show the scale, it instead shows the word custom. This appears to be a AutoDesk bug. Please see the attachment.
View 9 Replies
View Related
Oct 4, 2012
I'm following this tutorial, trying to create a field in a dynamic block to show the length of a line. If I have the attribute's "constant" value checked, the field shows up in my drawing as "Length: ######." However, when I uncheck the "constant" checkbox, the field doesn't show up at all, even after I run "UPDATEFIELD" and "REGEN."
I'm using AutoCAD Mechanical 2009, SP2.
View 4 Replies
View Related
Jul 6, 2011
One of the guys here has created a title block which has a scale field in it, this field reads the scale at which the title block is brought in, by use of an invisible attribute (he used the block in model space so that's why I scale them up). When he xref the dwg into my main drawing all is fine and the scales are as they should be but when he prints, the scales all show 1:1 on the print and in the main drawing. Could this be due to the fact that the xref is brought in at 1:1? But we can't see why this would change it as the block is obviously still at e.g. 1:50 in the xref.
[URL]
View 1 Replies
View Related
Jun 26, 2013
When you double-click on xref within the viewport and refedit opens and allows you to edit xref, how do you exit refedit mode when finished? I can not find the ref edit icon menu on 2013 banner layout.
View 1 Replies
View Related
Mar 19, 2012
Im having trouble with an XREF. Its a site plan which has a lot of hatching so slows my drawing. When I modify the XREF file either by turning off/freezing hatch layers, or even deleting certain objects, the changes do not show in my drawings despite reloading the modified XREF when prompted by ACAD.
View 3 Replies
View Related
Sep 4, 2009
When i insert a xref in a drawing i always use the command "send to back" in the model space. However when you switch to the layout the xref sometimes is on top of the symbols in the drawing. This problem is easy to fix with send to back but when you want to do this you have to set the viewport to modelspace selct your xref and then send to back. This is easy to do when you only have a few layouts but when you have a couple of layouts with several viewports in each layout it's a very time absorbing job. Is there any variable to make sure that the xref is always send to back in the layout space.
p.s i'm using Autocad LT 2010
View 4 Replies
View Related
Nov 10, 2011
I was in paperspace, clicked in the viewport to do something in model space and a compass with north south east and west showed up in the top right corner of my viewport. When I clicked on it, my x-ref rotated. How in the world do I re create this? I have no clue how I even accessed it or what command prompted this to happen.
View 4 Replies
View Related
