AutoCad :: Dynamic Block With Attribute And Annotation Text Style
Apr 8, 2013
Got a problem with the attached drawing. (The drawing will eventually be used as an xref).
I have created a dynamic block that has a (multi-line) attribute applied. This attribute is linked to an annotative text style. The drawing contains annotation scales. I have applied some of these annotation scales to the attribute so that it shows at 4.5 in paper space.
The annotation scales (metric) contained in the drawing are "1:500, 1:1000, 1:1250, 1:2000, 1:2500, 1:5000, 1:10000, 1:20000 and 1:25000". All these annotation scales are applied to the attribute.
The block contains a look-up table of properties that when applied, size the block to be used as a boundary to the following scales "1:500, 1:1000, 1:1250, 1:2000 and 1:2500".
Now, for example, i wish to set the blocks to be shown at 1:2500 in the drawing. I select the blocks and make them 1:2500 in the 'look-up' table. However, if i wish to set the annotation scale to 1:20000 (because this will xrefed into a drawing plan of a scale of 1:20000) it incorrectly shows the size of the attribute. The attribute has a 1:20000 annotation scale set to it but its size is not correct. This happens for other scales but for other scales (1:25000 for example) its fine. Also, the attribute could move when switching annotation scales and appear near the 0,0 WCS.
The layout tab shows the annotation scale and viewport scale set to 1:20000 but as you can see, the text is not set to 4.5.
I would prefer to have the attribute linked to the block though. I have tried ATTSYNC and RESETBLOCK but the bug keeps coming back.
I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
I have a problem with using .Net to insert a dynamic block and set the size property. The attribute text does not move correctly on insert, but will if manually stretched after the fact. From my research the recommendation is to make sure the attribute definition is marked as "Locked".
I have an attribute definition inside a circle (classic door/window number), both the circle and attribute are included in the Action Selection Set, however only the circle moves correctly. It all works correctly if manually inserted/stretched.
I can not for the life of me get my attributes to rotate with my block. I've attached the block to better understand what I'm talking about. I'd like the attributed text to rotate with the brown line. I don't care if the text ends up upside-down, I just want it to rotate with the block.
when trying to create dynamic rotation for a block with attributes. If I constrain the attribute to a line in the block it damaged the behavior of the block when using the dynamic rotation.
I tried both multiline and non- multiline attributes. I tried to fiddle with the "constraint settings" and leave only the Parallel constraint running with no effect.
When I open a new clean acad drawing and paste the block there, no problem.
We use this light switch block for work. For the life of me, I can't figure out how to make the attribute to stay (LOCKED) at rotation 0 when inserting no matter which angle the swtich is inserted. The only way the text stays at rotation 0 is if I insert the block as is (pointing right), then align the switch to a wall. The block is created with alignment grip. So if I add the switch to a wall at an angle (eg:45 degrees), the text will be rotated and stay rotated. If I insert the switch on the left side of the wall, the attributes will be upside down. I can manually rotate the attributes back to 0 degrees and it will stay locked to 0 degrees. But what I want it to do is to be inserted at 0 degrees to begin with.
I have a rectangle, it has an attribute called "WIDTH". Also it has a parameter for width of the rectangle. When I change the attribute (insert a block and define it) the width of the rectangle changes.
I have created a Dynamic Block with various visibility states.The block has attributes in that are not displayed depending on which visibility state that is selected.
Is there a way for VBA to look at attributes in my dynamic block and tell which attributes are visible?
Fairly versed with Dynamic blocks here, so the first thing I checked was to make sure that my FIELDEVAL was set to 31 to ensure updates but this one isn't working for me and may be a limitation of the software?
I'm making a dynamic block for my users who aren't familiar with electrical wiring so I am developing a series of blocks for our typical wiring configurations. In this instance, I've setup a pair of attributes to allow the changing of wire color codes and I want to use that single attribute entry to used in multiple other locations that are also connected to that conductor in certain situations. I have setup a field within this block to be the "VALUE" of the object (the attribute) in order to accomplish this. Unfortunately it is only displaying the default value I have for the attribute and will not update either upon insertion of the block or after an edit. Is this beyond the capabilities of Dynamic blocks or do I need to take a different approach?
My code add xdata to any object properly except for a dynamic block with attribute. After code excutes it disappears from screen . Even undo make strange thing. I guess I screw the database somehow. But even audit doesn't show any fix applied.
Attach is a sample drawing. And below is my code.
<CommandMethod("pppp")> _ Shared Sub test1() Dim Mydwg As Document = Application.DocumentManager.MdiActiveDocument Dim Mydb As Database = Mydwg.Database Dim Myed As Editor = Mydwg.Editor Dim MyRegisterApplication As String = "My_R_Cad" [code].....
I'm having trouble getting my attribute definitions to work with my blocks.
I'm trying to create a tag that can flip around (dynamic) and have a tag number easily entered (attribute).
I notice that I could only get the attribute definition to work during a drawing insertion is when I wblocked out my block and inserted that drawing file. I was not able to insert the drawing file that had the block in it.
I can't seem to make a dynamic block drawing file, and then insert that dynamic block drawing file if I want the attribute to work..
We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
Is it possible to make a dynamical block where the attribute is horizontal in combination of the alignment parameter (not rotate)? If I align to an arc the attribute need to stay at an horizontal position.
I have a dynamic flat screen tv block. Its length flexes to match the lookup table chosen size...32" 42" (the length parameter being a defined mm length) etc i want to display the 32" 42" etc items from the lookup properties table, but i'm at a loss as to how to go about it. currently i am using an attribute with a field pointing to lookup parameter/object/lookup description string but it's returning hashes.
I was trying to change an attribute and lost the "imperial door" dynamic block. I do not know where to find the original and replace it in the tool palette.
I am attempting to create some blocks, which consist only of text. The issue I am having is with the option to make the block annotative. I have set the text within the blocks to annotative, and it seems to work, but when I reenter the block editor and highlight the text, it still says "Annotative - NO".
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
I have a task where I need to automatically insert the drawing number (no path), plus two additional items, one an attribute, the other is within a dynamic block. I can achieve this using fields but now I havce to truncate some of the text.
It seems like I can't edit if I am using fields and attributes/blocks can't be used in Diesel (correct me if I'm wrong)
This is the information I have:
Filename: 123456-AS-WE.dwg Attribute: Q2 Dynamic Block: X1 - Additional Information
This is what I require: 123456-AS-WE [Q2] [X1]
This is what I have so far: 123456-AS-WE [Q2] [X1 - Additional Information]
In other words, I need to restrict the dynamic block field to the first two characters.
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
I have a dynamic block with several visibility states, and each visibility state has one invisible-constant attribute. I can't seem to wrap my head around dynamic blocks well enough to get the value from the active visibility state invisible constant attribute. I know how to get the visibility state like this:
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control() (graphscr) (Setq sc (ssget "X" '((0 . "INSERT")
I am trying to set constraints to this block and having some issues. I want to constrain the attribute text so when I stretch the block from the grips the text centers itself automatically within itself. The constraints will not let me pick the grip on the attribute text as a point.
I am working on making some view tags, and I would like the underline between the tag's title and the scale (any arch or engineer would know what im talking about) to stretch as text is added or taken away. Basically I want the right end of the underline to always be aligned with the right "edge" of the last letter of text. And no, I can't just underline it, the architect is very particular about not doing that. Right now I have this awesome dynamic sheet view tag with a rotatable north arrow and a dozen visibility states for the scale bars, but it all seems in vain if I still have to work with it manually. The text is an attribute, no special properties or settings, just locked in position.
Attached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
I have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
I have a lisp function that is updating attribute values on a newly inserted block. The lisp function uses entget to read the attribute. Then it plugs a new value into the assoc 1 using subst, then uses entmod to update the attribute's value. It all works fine except that the attribute loses its style, i.e. assoc 7, somehow. If I do an entget on the attribute right after the entmod the assoc 7 is nil. The symptom on the drawing is that the attribute value is not visible until I close and open the drawing.
This only happens on a newly inserted block on existing drawings. If I close the drawing and reopen it then the lisp function works fine. Or If I insert the same block on a new drawing it all works fine. what would cause the assoc 7 to go missing after an entmod to change the attribute value?
