When I am trying to label an object, surface slope, elevation or lot line distance my text reverts back to layer 0. I have checked the Label style composser and have everything that I see set to the layer I want it on. When creating the label I am even physically on the proper layer but when I make the label it still goes to 0.
View 1 RepliesIn the attached file there are two custom iProperties that cannot be perminantly updated nor deleted. The iProperties are "size" and "purch_qty". These iProperties were created and set using a custom macro but they are of course accessable via the standard iProperties dialog. I can change the values for these particular iProperties but as soon as I save the file they revert back to their original values. Same goes for trying to delete them. All other iProperties, custom and otherwise, seem to behave normally.
The sketch in this file originated with a 2D DXF file for a vendor supplied aluminum extrusion quite a few years back. The original file has been copied (save-as...) to about 20 different files over the years. The iProperties in question were added years after most of the files were created, Each file is exibiting the same problem. These files are used in a LOT of assemblies. The thought of recreating all these files from scratch and updating the assemblies is not very inviting.
No other IPT files seem to be having this issue.
Inventor 2012 SP-1
Acad 2012 SP-1
Vault 2012 Update 1 Hotfix DL18480860
Windows 7 Pro 64-bit SP-1
Quad core Xeon 2.26GHz 12 GB
Quadro 4000, 7936 Mb, driver 8.17.12.6570 (265.70), Dual Monitors
SpacePilot Pro, driver 3.3.107.0
I've created my own workspace and saved it. When I shut down coreldraw and it reverts back to default and I have to manually set it back to use the one I saved.
View 2 Replies View RelatedI have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.
View 2 Replies View RelatedIs there a way to set alignment labels layer automatically?
I would like to create a suffix to C-ROAD-TEXT same as to alignment
example:
C-ROAD-Penstock_Option#1
C-ROAD-TEXT-Penstock_Option#1
Because I don't like to have labels of alignment when the alignment is turn off.
When using mtext and a background mask and try to modify the border offset factor from the default of 1.5 , the factor reverts back to 1.0. If I type in 1.25 or 1.75, it will not save it and revert to 1.0. If I put in a larger number like 2.0 or 3.0, that factor will be retained.
View 4 Replies View RelatedIs there a way to revert back to the original colors of an xref besides having to reattach the xref and purging the DWG.
I always change the colors of the projects Existing site/utilty XREF to color 252 to shade it back to have the proposed show up darker. But I try to select all layers to change the colors back to what they were before and the box to set color by layer is not available.
Every time I create a new layer, name it, asign a color, linetype, etc...it defaults back to the original color, making me set it twice. Am I missing a setting somewhere?
View 2 Replies View RelatedWhat is the difference between Annotation Text versus the Civil 3D Lables? Do you have more control over the annotation text? Do lisp routine work better for annotation text than the Civil 3D Labels?
I have a routine that will create a quick leader and text from the object layer that it selects.
Layer EX-PAVEMENT ----> the quick leader call out would label it as Existing Pavement.
Moving a text box or section label and it disappears then zoom extents and everything disappears. save the file close reopen and everything back to normal.
I have tried exporting to a different AutoCad year (2010) but the same issue is still occurring.
I am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
View 5 Replies View RelatedI am in the process of modifying our current company standards to conform to another set of standards. The main change is switching from "simplex" font style to "Tahoma".
Simple in theory but problematic in execution, our main alignment label style "GEO-LABL", used for P.O.T, PC, ect. utilizes an underlined reference text object in order to control the length of the line under the call. The base insertion places the call perpendicular to the alignment, when dragged to the left or right it switches to stacked text plan readable. Works like a champ with the "simplex" text style - 1.jpg see attached.
Now simply changing the font to "Tahoma" - 2.jpg the larger you make the text the larger the gap.I am trying to stay away from adding a line for the underline due to the difference in lengths needed when the call gets longer or shorter based on alignment name or stationing.
I am trying to do centerline stationing but the texts are coming out too small and the tick marks are not showing up.
View 2 Replies View RelatedWhen I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
Suppose you have an existing structure that you are going to tie into with a proposed pipe.
We label existing structures with smaller text and a different color (as opposed to proposed labels)
Is there any way to label the structure where the one single proposed pipe text is a larger text size with a different color, as shown here?
The background mask does not align with text in curve labels with the "allow curve text" set to true. See Attached.
I found old posts with this problem for version 2009 and older. Is it still a problem in 2011/12/13?
(running C3D 2012 sp4, Win7 64bit, 8GB)
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View RelatedI cannot go back and edit a text layer. There appears to be no way to re-edit text once you move off of the text area during it's creation. Am I missing something? Is there a great plugin to fix this deficit?
View 5 Replies View RelatedHow do I modify the leader for station and offset labels to underline the top line of text?
View 3 Replies View RelatedHow do I go back and remove a text layer after I have save an image as jpeg?
View 1 Replies View RelatedMy questions is how to prevent the following from happening. I created a layer style drop shadow in a .psd file with the below parameters.
I saved it as an .asl file that I could use later. When I loaded it into a different .psd file later that day some parameters stayed the same but the angle reverted back to 30 degrees from 120 degrees all on its own as shown below.
I just want to know how to keep layer style parameters I saved in an .asl file from reverting back to defaults when loaded in to a new .psd file.
My systems parameters are as follows:
Photoshop CS6 Extend Version 13.0 x64
Mac OSX 10.8.2 with 705.44 GB used out of 749.3 GB available
The only other software I am running is Safari web browser. This is my first time trying to save a layer style and use it in a different .psd file other than the one I created it in.
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedUsing photoshop CS6 on Mac, I am seeing a problem with one of my batch processing sript who's only task is to apply an embossed water mark to images which I have resized such that the longest side is always 500px. (short side varies depending on how I have cropped).
In most cases, the piece of text I am adding to the image appears fine. But then for no apparent reason, it will suddenly apply the text (which I have set to 24pt) and it is way to big. To address the issue, I have to reduce the font size (via the actions pallate) down as far as 8 pt. Then it starts to appear more or less correctly (for a while) until maybe a few weeks later when I open up photoshop to run the job again and suddenly 8 pt font is WAY too small and I have to bump it up to 24 pt again.
I'm a relative beginner with AutoCAD and was looking to find a way to quickly import a selection of survey points (X & Y coordinates) and their labels from an excel spreadsheet using a script file.
View 3 Replies View RelatedWhen I create a profile, then explode it, none of the text or lines are bylayer. My company wants everything to be bylayer. I can't figure out which style controls the profile to make everything bylayer after it is exploded.
View 2 Replies View RelatedI recently had to re install my copy of Autocad2008 so it has been stripped back to basics.
Basically what I am after is I want to be able to click on a layer and see what layer it is on. I used to have a window on the title bar which would let me do this and I could then click into that window to change any layers. How to get that layer window back into my title bar?
I have a building floor plan drawing which has many colours although the Layer Property Manager shows them as being all white so it seems every layer has had its colour modified manually.
it’s possible to set all layers back to their By Layer colour but take the manually modified colours with them?
I have themed a map and added an expression text label to each parcel. I went to move the text of one parcel and it worked fine. Now When I try and select any other labels to move I can't select them. Only the parcel itself will allow selection.
Map 2012
How do I convert map labels to text? I know I've done it before but I can't seem to figure it out right at the moment.
Specifically, I've got a parcel shapefile labeled with the owner name, and I want to convert that to text to be able to move the labels around and edit some of them.