I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I have tried everything. Its not really a cone, but same difference its a bottle neck. I want the company name around the bottle neck.
View 2 Replies View RelatedI am trying to replicate a logo that we own but lost the digital copy of. I happend to have the D in the logo but im trying to replicate the cone shapes pointed together in the backround. Along with the shading that is given. The effect is a point in the D but when you look at the big picture you can see how it all comes together.
View 9 Replies View RelatedI have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedI am trying to fill a cone shape container with particles. Other then Realflow I can not seem to find any tutorials on this. I am currently trying this with Particle flow, i have selected the cone with UDeflector and that works i am also working in pview.
View 6 Replies View RelatedHow do I create a top view cone shape like below?
View 6 Replies View RelatedIs there a simple way to make a cone shape in Xara Photo and Graphics designer 2013? I need to make a cone that can be extruded and shaped sort of like this?
View 9 Replies View Relatedi am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
How to wrap a shape from one edge of my canvas to the other? In other words I want to draw off the edge of one side and see it also appear on the opposite side.
View 2 Replies View RelatedI have this object that has a pattern around it with spikes:
I want to take this pattern from this shape and wrap it around this ellipse:
Obviously I know that the pattern will be too short and won't fit around the full ellipipse, but wondering if there is an easy to way to accomplish this (ie a built in function)?
I have a photograph and a bubble custom shape.
How can I get it so that the photograph wraps into the custom shape and also looks like a bubble? So really, it becomes the background of the custom shape.
I need to create a gold bar in the shape of the map of Texas that looks 3D. I need it to look real. I have a pic of a gold bar with the embossed 999.9 and the serial number. I have taken an outline of the map and extruded it so it looks 3D. I cannot figure out how to fill the extrusion with the bitmap. I want to wrap it so it looks like real gold on the front and sides with embossing undistorted. I am using Draw X4.
View 12 Replies View RelatedI have text in a circular shape but how do i place the text inside the part on to the front of the face?
View 3 Replies View RelatedIs it possible to add text and lines into round parts? Those are for the manufacturer so they can see where exactly all the stuff will be painted on.
View 5 Replies View RelatedWhat are the steps to change face shape or body structure in Photoshop CS5?
View 7 Replies View RelatedI recently lost a pet and want to use a photo of her as a tribute. What I'd like to do is to crop a heart shape of her face and layer that into a white background. The question I have is: how on earth do you draw a perfect heart using the lasso?
View 2 Replies View RelatedI have started a project and have a somewhat unusual condition. I have a structure with a Conical Roof. We are putting a parapet around this roof. With the parapet, we are also going to create 4 individual structures that direct water/rain flow to scuppers that will be fabricated into the parapet. Below is a sketch of our condition. How to get the shape of a line that follows the face of a cone. Obviously, this line is not projected to the center of the cone, so it is not just a straight line. I am imagining either a radial cut piece, or a complex/multiple radial cut piece. I don't really know how to put it into words exactly.... Take a look at the sketch.
Cone Info.jpg
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedI just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View RelatedHere when ever i click on the editable poly modifier again this happens, now im pretty sure this is not supposed to happen,
i tried searching the internet and several forums but no results (maybe im just missing some 3dsmax vocabulary so i didnt coin the term for it)
How do i use a specific shape to carve out a primary shape
e.g. putting a sphere inside a box (sphere is protruding from all 6 faces) and carving out the box
Edit: changed the image to a link and added the scene file as an attachmentbutcher_knife.zip
Is it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View Related