I am trying to replicate a logo that we own but lost the digital copy of. I happend to have the D in the logo but im trying to replicate the cone shapes pointed together in the backround. Along with the shading that is given. The effect is a point in the D but when you look at the big picture you can see how it all comes together.
View 9 RepliesI want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I am trying to fill a cone shape container with particles. Other then Realflow I can not seem to find any tutorials on this. I am currently trying this with Particle flow, i have selected the cone with UDeflector and that works i am also working in pview.
View 6 Replies View RelatedHow do I create a top view cone shape like below?
View 6 Replies View RelatedIs there a simple way to make a cone shape in Xara Photo and Graphics designer 2013? I need to make a cone that can be extruded and shaped sort of like this?
View 9 Replies View RelatedI have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedI have a logo that I created using the script fu macros. What I want to do now is that create a button shape with rounded edge and put the logo ( a rectangular) and bend its edges to wrap around the button without distorting the text of the logo itself. how do I do that?
View 2 Replies View RelatedI'd like to create a logo with some text in the shape of a circle or maybe a horseshoe.
What's would be the best way to do this? I've tried creating a path in the shape of a horseshoe but can't work out how to add my text to it.
So I am starting with a 12 sided star vector and using effect>stylize>round corners I am trying to round of the outer corners so they appear as a somewhat cartoonish cloud. But in doing this, it rounds of the inner corneds too, replicating a sort of bottle cap shape. How do I make it round off only the outer corners?
View 3 Replies View RelatedIf I have a fat tube (or a rectangle really) on its own layer, how to I make it have a pointy end (like a tentacle). Ctrl-T does it okay, except it always changes the length and makes it fuzzy.
Now I'm somewhat happy with that, however, how do I make it less fuzzy? Make it look less anti-alialized?
when I browse image files I find that the Photoshop/Adobe logo has been replaced by the Netscape logo. When I attach a file in email the N-scape logo is there by file name/number not Photoshop logo. Anyone know why or have this issue?
View 5 Replies View Relatedhow to get a flat pattern from a cone with knuckle. I am using 2013.
View 5 Replies View RelatedIs there a way in Inventor (or any other Autodesk Design Suite program) to find the point on a cone (attached jpg) where the lifting lug should go so that when lifted, the cone stays in the same orientation as in the attached picture.
View 4 Replies View RelatedIs there any easy way to create waffle cone like this. I tried simple bend modifier but it's not giving me correct curvy stitch just straight one and I need the red line on image. URL...
View 1 Replies View RelatedHow to do a development of a frustum of a cone in auto cad?
I will prepare coal silo fabrication drawing in my office that is why i am asking.
I tried to convert the cone surface which is created by revolving line, to solid, but always fail. how to convert it? (Autocad 2013)
View 9 Replies View RelatedAssume that I have an odd pyramid 3D-solid say with a polygon basis that lies on a "floor". The apex was higher than the ceiling, so I "sliced" the pyramid to fit it right under the ceiling.
Now, I change my mind and want to make the ceiling slightly higher (say, 1"): after raising the ceiling I am left with a sliced pyramid that is cut 1"below the ceiling. Question is : what is the best way to re-extend the pyramid (and make it look like it was cut by the higher ceiling) ?
I cannot just "undo" because too many things happened in the meantime.
I can imagine re-creating the unsliced pyramid by press-pulling the upper sliced surface and then slice this extension with each side of the original sliced pyramid and ultimately re-slice with the new ceiling. Can I do better / faster than that ?
I am trying to place some objects on a cone. But i can't get it to work. The idea is that the 6 objects should be fitted on the cone so that they are placed all around the cone. But i can't get them to align with the angle of the cone. I have tried the 3D align, but this just doesn't work for me.
View 9 Replies View RelatedI have a cone shaped part and would like to put a hole in the curved face. I would like have to hole square to the face in the flat pattern so it can be cut on the plasma table, is there a way to do this? I attached the part with holes in the approximate location.
Windows 7 Pro 64
i7-980X
12Gb ram
GTX460
Is it possible to make a cone with sheet metal that can be unfolded?
View 9 Replies View RelatedWe commonly weld two half cone sections together to make a complete cone. To show the weld prep i have modeled a chamfer on the cone edges.
When i try and show the chamfer on the drawing using a section I cannot dimension the angle as the surface is viewed as a curve by Inventor.
I have attached a drawing and part file showing the problem and showing the detail I would like (I've shown the detail using a simple sketch).
How do I make this flat pattern correct... it might be that I have to use a different way to folded up the crimp But I'm new to crimps
View 4 Replies View RelatedI have a .pdf that I want to use in a presentation next week. The problem is, since we last used this .pdf, we have changed our logo. How does one switch out one image out for another?
View 3 Replies View RelatedWe're seeing strange behavior on all of our workstations when using a Refold feature on a sheet metal cone.  Surfaces are (very incorrectly) being added at the top and bottom openings of the cone when the Refold feature is added. The behaviour is the same whether using Contour Roll or Revolve.  The surfaces dissappear when the cone is revolved to a lesser degree, such as 200 degrees instead of 359.  The cone can be revolved to 360 degrees and ripped but that raises a whole nother problem because Inventor does not correctly refold a 360 ripped cone. File attached.  By the way, the surface artifacts show up in the flat pattern as well.
Inventor 2012 SP2
Vault Collaboration 2013 SP1
Dell Precision T3500, Xeon W3503 2.4GHz, AMD FirePro V4900
Windows 7 64-bit, 8 GB RAM
I have started a project and have a somewhat unusual condition. I have a structure with a Conical Roof. We are putting a parapet around this roof. With the parapet, we are also going to create 4 individual structures that direct water/rain flow to scuppers that will be fabricated into the parapet. Below is a sketch of our condition. How to get the shape of a line that follows the face of a cone. Obviously, this line is not projected to the center of the cone, so it is not just a straight line. I am imagining either a radial cut piece, or a complex/multiple radial cut piece. I don't really know how to put it into words exactly.... Take a look at the sketch.
Cone Info.jpg
How can I draw a 3d arrow in autocad 2012? (where the arrow head is a cone, or something that appears in all view angles).
Assuming the answer will be a cone and line grouped, how can I rotate them (I seem to be able to rotate only in the xy plane).
I have tried everything. Its not really a cone, but same difference its a bottle neck. I want the company name around the bottle neck.
View 2 Replies View RelatedHow to draw with sheet metal rules centric cone? Ive spent hours on it and nothing, it always end up on ASM failure, or ceates the only one half( when sliced on asymetric way). This need to go in two halfs.
Ive tried:
two circles 1300 and 300, top circle centre moved from Y by 127mm on X axis.
contour roll will revolve on axis between circle centre points, than extrude something with cut and it is but the shape is an oval not circle.
Ive used loft command and slice command but only one side picke will work with flat pattern.
Alright, with out pictures, let me try to explain what I'm trying to do I'm trying to create a black and white (grayscale) top-down gradient of half a cone.
I select a circle, and using the cone gradient, start from the middle and go outward to the edges. Great so far, I have a top-down cone, but what I really need is only half of that, as if I was creating a top-down volcano with the top half sliced off and a flat rounded middle.
This is becoming a bump-map so the RGB value must match perfectly the highest point of the gradient with the sliced off part.
I am currently in the process of doing some traffic management drawings and need some road signs, but mainly im after some free cone software apparently. You can get some really good software, free if possible if not then the cheapest available. This is for autocad 2008.
View 9 Replies View RelatedIn Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
Â
This works correctly in CS4, but not in CS6 (don't know about CS5).