Is there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 RepliesIf I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
The text that we're using for the majority of our notations doesn't look very good at 1.0x scale so I try and adjust the paragraph line spacing to 0.8x as I go. I also know that if I create MTEXT and adjust the paragraph line spacing at the prompt it will "stick". However it doesn't stick for leaders and there's no real way of creating a permanent setting, is there?
Slight inconvenience of adjusting that setting each time I create a leader.
I normally use AutoCAD Electrical 2012 but my problem is AutoCAD so I thought I would log it here.In ACE there are default profiles for ACE and Vanilla AC. I use the Vanilla AC for basic CAD drawings.
I like the feature "Base Line Spacing" for dimensions, to state the obvious,BUT it I do some vertical dims then try to do some horizontal dims (both in base line spacing) the software wants to stay in vertical BSL.
I can find is to create a standard DIM, delete it, then i can do a selection of horizontal BSL.Is this how it works in AC2012? Or is it a function of ACE? There are some other functions in ACE that do not work in standard CAD under the CAD profile.
I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies View RelatedI've cut and "paste special" a table from excel to autocad, and would like to edit several (not all) cell's text color from the default (in this case white) to the bylayer color.
When I set up my table style I specified the text to be bylayer, however apparently a paste from excel ignores the setting.
I am constructing a photo book with some text boxes. On a couple of the pages the line spacing seems to go haywire and hence the second line partially types over the first line. How do I adjust the line spacing ?
View 1 Replies View RelatedI recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
adding a page baseline grid! I love it, but I have one problem with it. For example I set the baseline grid to 13 pt, i have text with line spacing specified to 13 pt. I right-click the paragraph text box and select "Align to baseline grid". Then the text surely is aligned to the grid, BUT the lines are spaced to every other line, instead of every line.
View 9 Replies View RelatedI need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View Relatedthrough some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View Relatedit's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedHow to change the line spacing for fonts in IV2010?
Reason I ask is b/c I had to change fonts from RomanS to RomanD, b/c the former font wouldn't print clearly enough for the shop and customer to read it (both in pdf and dwg/dxf).
The problem is, RomanD has DOUBLE SPACING as default, instead of the usual single spacing. I can't get the "Styles" editor to change the spacing in the VIEW LABELS and WELD SYMBOLS.
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies View RelatedI am doing a project and I have a lot of feature lines. I will need to be able to lable these feature lines with tags and then create tables for those. My question is, is there an easy format that I can do that will lable these lines in an order I set it up? Right now it just lables all over the place. The lines are counting the curves too. For example: L1 L2 L3 C1 L5 L6 C2 L8. I can make it work, would just think there is a better way. BTW I am using Civil 3D 2011.
View 1 Replies View RelatedHow do I save my line and curve tables after I customize them?
View 1 Replies View RelatedThe vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
I have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
How do I edit a dimension text to add a second line (so dimension on top of the line and text on the second line)?
View 3 Replies View RelatedI was using arc aligned text and i can't seem to change the charter spacing. it is grayed out.
View 3 Replies View RelatedHow to get the “text” or “block” parallel to a particular line?there is more than one way to alight the text with a particular line but wondering if there might be more powerful tools to do so.
“Rotate” and “Align” are possible commands to align the text with particular line. Parallel constrain is another option to do so but will make the drawing “busy” with additional parameter.
Equally, what if I need to make a block parallel to a particular line? In this case, the “parallel constrain” doesn’t work! Just I may take the advantage of “rotate” and “align”..What I wanted to know if there is a more brilliant way to get the“text” or “block” PARALLEL to a particular line with a smart tool.
I need to show contour lines that have the elevations embedded in the line. Is there any way to create a line type that will allow me to select and/or change the text to be embedded in the line, without having to define a unique linetype for each elevation?
View 2 Replies View RelatedI am trying to update the companies linetypes to utilities the text alignment in linetypes added in the 2012 version. I have added the "U" setting to the linetypes, but don't understand why the text is not centering after being flipped. Below is the overhead line:
*OHL,OVER HEAD LINES ----OHL--------OHL--------OHL----
A,2.40,-.15,["OHL",L60,S=.06,U=0.0,R=0.0,X=-0.1,Y=-.03],-.1
I just started working for a new employer as a 2012 AUTCAD Tech: they have only used old school DTEXT for everything (what a pain compared to multi-text "MTEXT").
Problem: I converted several single line Dtext to Mtext (.075 test height) paragraphs but can not achieve the same spacing they have been using (.225) because .025 is not an availalbe increment in the parapgrah & line spacing selection. Is there a way or a LISP that will allow me to add custom spacing choices to the Line/Paragraph spacing default list?
Then I can upgrade so much and work faster, yet maintain the standard spacing already set via snap grid settings.
I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
I have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedWhen using RomanS, how do you stack fractions in single line text? AutoCad will do it automatically in multiline text but I am having trouble in single line text.
View 5 Replies View RelatedWhen someone has pasted text in from microsoft office (word 2010) to a coreldraw x3 text block, I find the line spacing is in points (pt). I seem to be unable to change this to percentage. I'd like to change it to % so that text block matches my others created in coreldraw where linespacing is in %. Is there a way to change it to % once line spacing has become pt?
View 3 Replies View RelatedI am new to Corel Draw, and I'm using a shiny new copy of X5. It seems like this should be ultra simple, and I don't know what I could possibly be doing wrong, but I have text in a Paragraph box and want to simply adjust the line spacing (leading), but no matter what mode I'm in the control does nothing.
I made sure that I wasn't missing a space or a return or something by using select all, I have used all three modes, which will change the spacing as I select a new mode, but changing the value in the spacing box does nothing. I can make it 2 points 100 points, 50%, everything I have tried does nothing at all.
I im new to photoshop, im trying to do some uni work on it and i want to add txt, but i need it to be double line spaced, and i have no idea how to do this on here, or even if its possible. If you know please help!! im not very good at technical things so if u try to explain please be clear and basic.
View 2 Replies View RelatedWhen applying Text when I hit enter to add a new line the spacing between lines is WAY too much where do I find how to set the line spacing. otherwise I have been creating new layers for each line which gets messy.
View 2 Replies View Related