The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies View RelatedI've created a Line & Curve table to display my metes & bounds. One of the curves is displaying an incorrect length, off by .01. It was caught as my project was reviewed by the city engineer. I went back to the database (Prospector --> Sites --> Parcels) and my mapcheck does conflict by .01.
Why is the mapcheck different from the Line / Curve table? How can I 'fix' the table to match the mapcheck data?
Is it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
When trying to etransmit a dwg from Civil 3D 2010 which has line/curve tags with tables built from them, we are getting output which has the table headers but no entries below. The cad user on the other end gets no line/curve data. The other user is on Civil 3D 2011.
View 5 Replies View RelatedCan we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.
View 2 Replies View RelatedI have an alignment that is line and curve tagged for a table. The last segment of the alignment is a 3 point curve. It shows up in the alignment grid view, and is tagged. When the table is produced the everthing comes in except the 3 point curve I mentioned.
View 1 Replies View RelatedI have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
I want to create a Curve table for an alignment.
You are able you get range of properties, i.e length, chord length, start/end chainages, mid-ordinate.
I've notice lets for arguement sake 'chord length' text component editor is: <[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> but is it possible to modify the code so i can insert half a chord length.
Ive tried
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]>/2 ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]/2> ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)/2]> ---- doesn't work
<[1/2*Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> ---- doesn't work
How to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
I have created an easement after I selected the line callouts and created my parcel table I realized I missed selecting one of my line labels and it is missing from my table. I know I can just erase the table and then reselect all line callouts to create a NEW table, but I was wondering if there was a way to just select the line callout I missed and have it added to the parcel table without recreating a new one.
View 3 Replies View RelatedHow to start back to curve & line tag number 1 after generating tags?
During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?
I am doing a project and I have a lot of feature lines. I will need to be able to lable these feature lines with tags and then create tables for those. My question is, is there an easy format that I can do that will lable these lines in an order I set it up? Right now it just lables all over the place. The lines are counting the curves too. For example: L1 L2 L3 C1 L5 L6 C2 L8. I can make it work, would just think there is a better way. BTW I am using Civil 3D 2011.
View 1 Replies View RelatedIm trying to access the line labeling via the lines/curves menu heading on the main menu bar but i dont have the Lines/Curves drop down button. Is there a command i can enter to show this menu bar?
View 1 Replies View RelatedI'm using label for line & curve.
I have discovered that the points from it is created are fixed in Z value.
You can use the grips with object snap , you can move the grips but the Z values are preserved......
it should be to get the Z value of X,Y,Z given by object snap , isn't it ?
We would like to be able to rotate line and curve labels in Civil 3D 2010.
Some of our drawings get really crowded and we need to slightly rotate the line or curve labels. This is fine with regular autocad text, but how can we accomplish this with styles and dynamic line/curve labels? I can't seem to find a way to do this with the grips and setting up new styles with specified rotations isn't an option because we need to be able to fine tune and eyeball the rotation of the label to make it look right.
C3D 2012 SP1
Win 7 64 Enterprise
Intel Xeon 3.07 Ghz 8GB Ram
NVIDIA Quadro 4000
How do I save my line and curve tables after I customize them?
View 1 Replies View RelatedI am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
I need to lable the delta of a PI in an alignment where one segment is an arc and the following is a non-tangent line.
Geometry points don't offer delta and Tangent Intersections won't label at PCs and PTs.
Is there an expression that can be used?
We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:
I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.
When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.
All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1.
All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......
Are these locked somewhere?
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
How can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
Windows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
I need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies View RelatedI created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?
View 8 Replies View Related(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
it's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedI have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
The text that we're using for the majority of our notations doesn't look very good at 1.0x scale so I try and adjust the paragraph line spacing to 0.8x as I go. I also know that if I create MTEXT and adjust the paragraph line spacing at the prompt it will "stick". However it doesn't stick for leaders and there's no real way of creating a permanent setting, is there?
Slight inconvenience of adjusting that setting each time I create a leader.