AutoCAD 2010 :: Paragraph Line Spacing For Leaders
Apr 16, 2013
The text that we're using for the majority of our notations doesn't look very good at 1.0x scale so I try and adjust the paragraph line spacing to 0.8x as I go. I also know that if I create MTEXT and adjust the paragraph line spacing at the prompt it will "stick". However it doesn't stick for leaders and there's no real way of creating a permanent setting, is there?
Slight inconvenience of adjusting that setting each time I create a leader.
View 4 Replies
ADVERTISEMENT
Sep 1, 2012
I just started working for a new employer as a 2012 AUTCAD Tech: they have only used old school DTEXT for everything (what a pain compared to multi-text "MTEXT").
Problem: I converted several single line Dtext to Mtext (.075 test height) paragraphs but can not achieve the same spacing they have been using (.225) because .025 is not an availalbe increment in the parapgrah & line spacing selection. Is there a way or a LISP that will allow me to add custom spacing choices to the Line/Paragraph spacing default list?
Then I can upgrade so much and work faster, yet maintain the standard spacing already set via snap grid settings.
View 5 Replies
View Related
May 22, 2012
I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies
View Related
Nov 26, 2012
I normally use AutoCAD Electrical 2012 but my problem is AutoCAD so I thought I would log it here.In ACE there are default profiles for ACE and Vanilla AC. I use the Vanilla AC for basic CAD drawings.
I like the feature "Base Line Spacing" for dimensions, to state the obvious,BUT it I do some vertical dims then try to do some horizontal dims (both in base line spacing) the software wants to stay in vertical BSL.
I can find is to create a standard DIM, delete it, then i can do a selection of horizontal BSL.Is this how it works in AC2012? Or is it a function of ACE? There are some other functions in ACE that do not work in standard CAD under the CAD profile.
View 1 Replies
View Related
Apr 25, 2013
Is there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 Replies
View Related
Mar 5, 2013
Look at the picture attached.
Why does this happen? Every time I open a file where I changed paragraph spacing it always gets back to its default value of x1,00.
View 6 Replies
View Related
Jun 27, 2011
If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
View 1 Replies
View Related
Jun 9, 2010
I have a document (booklet fold set-up) consisting of linked paragraph text and some objects (jpegs) spreaded through-out the booklet.
After selecting All Text, I have set the paragraph spacing at the Paragraph Formating Docker > Spacing > Paragraph & Line > After Paragraph to 70%. That very nicely decreased the whole document's space between paragraphs on all pages to the size I wanted. Problem is that the moment I move any object into that paragraph text and set it to Wrap Paragraph Text, then the space between the paragraphs simply jumps back to full size, even though it still shows 70% in the paragraph docker. (It happens only on that page, all others are still showing a 70% space between paragraphs.) And there's just no convincing it to go back. It's as if the presence of the object overrides this setting.
View 1 Replies
View Related
Dec 28, 2011
I, sometimes, get annoying additional, but small, paragraph spacing when using a tab at the beginning of a paragraph. Because this is not a constant problem, I thought I could find the cause, but it eludes me.
View 8 Replies
View Related
Aug 17, 2011
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
View 3 Replies
View Related
May 22, 2011
I have some text in a paragraph frame that I want it to be in full justify but when I apply it the spaces between the words get messed up, some of them become too small and in some cases the words get so close to each other that you almost can't read the text. Also the words in the last line get also very close to each other and that ruins my design.
I have tried inceasing the kerning but this affects the space between the characters too and I don't want that. What I need is a way to correct manually the spacing between the words. I tried doing so by increasing the word spacing from the "Paragraph Formating" docker but for some reason it doesn't work at all.
View 12 Replies
View Related
May 30, 2013
I am working on a drawing where the annotation scale was 1:30 and I changed it to 1:40 and all my annotative leaders no longer line up horizontally (the little line just before the text....see attached example).
Is there a way of globally fixing this issue without having to fix each one independently?
View 1 Replies
View Related
Jan 12, 2012
2012 drawings are not showing multi-leaders, when opened in 2007. We saved the 2012 drawings down to 2004. These same multileaders are not printing either.
View 7 Replies
View Related
Nov 26, 2013
Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
View 6 Replies
View Related
Jun 24, 2013
When we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies
View Related
Nov 28, 2012
Would like to know how to set automatic text masking for call outs with leaders. Is there a way?
View 3 Replies
View Related
May 8, 2012
it's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies
View Related
Oct 15, 2004
is it possible to change the line patern of leaders in text notes, from solid to dash or another one? I know I can change the tick type but can´t find anything for the line.
View 2 Replies
View Related
Jul 10, 2013
How to change the line spacing for fonts in IV2010?
Reason I ask is b/c I had to change fonts from RomanS to RomanD, b/c the former font wouldn't print clearly enough for the shop and customer to read it (both in pdf and dwg/dxf).
The problem is, RomanD has DOUBLE SPACING as default, instead of the usual single spacing. I can't get the "Styles" editor to change the spacing in the VIEW LABELS and WELD SYMBOLS.
View 9 Replies
View Related
Aug 16, 2011
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies
View Related
Dec 9, 2013
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
View 9 Replies
View Related
Mar 1, 2013
I have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
View 2 Replies
View Related
Aug 14, 2012
I was using arc aligned text and i can't seem to change the charter spacing. it is grayed out.
View 3 Replies
View Related
May 21, 2004
I am running photoshop CS on my laptop which is a Compaq presario 1503 AP.
I have had this problem since I used Photoshop 7 and now Photoshop CS. When I want to go to a new paragraph or the next line using the enter key, it just doesnt work.
When I hit enter, the text just exits the text entry/edit mode.
View 1 Replies
View Related
Apr 17, 2011
When someone has pasted text in from microsoft office (word 2010) to a coreldraw x3 text block, I find the line spacing is in points (pt). I seem to be unable to change this to percentage. I'd like to change it to % so that text block matches my others created in coreldraw where linespacing is in %. Is there a way to change it to % once line spacing has become pt?
View 3 Replies
View Related
Jun 24, 2011
I am new to Corel Draw, and I'm using a shiny new copy of X5. It seems like this should be ultra simple, and I don't know what I could possibly be doing wrong, but I have text in a Paragraph box and want to simply adjust the line spacing (leading), but no matter what mode I'm in the control does nothing.
I made sure that I wasn't missing a space or a return or something by using select all, I have used all three modes, which will change the spacing as I select a new mode, but changing the value in the spacing box does nothing. I can make it 2 points 100 points, 50%, everything I have tried does nothing at all.
View 11 Replies
View Related
Feb 2, 2006
I im new to photoshop, im trying to do some uni work on it and i want to add txt, but i need it to be double line spaced, and i have no idea how to do this on here, or even if its possible. If you know please help!! im not very good at technical things so if u try to explain please be clear and basic.
View 2 Replies
View Related
Mar 29, 2013
When applying Text when I hit enter to add a new line the spacing between lines is WAY too much where do I find how to set the line spacing. otherwise I have been creating new layers for each line which gets messy.
View 2 Replies
View Related
Feb 22, 2013
I am having issues with tabs lining up for a current menu project I am working on. Im using paragraph styles and character styles as well. All prices shown have the same styles and sould justify right,but there are odd gaps.
View 2 Replies
View Related
Apr 6, 2013
ScreenShot108.jpg
left sketchup layout ... NOT ATTEMPTS TO BE VECTOR GRAPHIC PROGRAM
RIGHT X6
... left same 2squares line 2px and 2squares line 15px
... same line stile !!!! upper two have style spacing 0,2x and bottom 0,4x
... you can adlust the dot/line/ ... spacing !!!!!!!
... tried to do that in corel !!!! ??? no easy way :( ...
... in layout I set 0,21 0,3 0,4 1 1,2 ..... and immediately see the change not affecting
NOT AFFECTING LINE BRIGHTNESS
View 1 Replies
View Related
Aug 11, 2013
How do you start a new line in a paragraph block? When I hit the enter key, it just returns to the front of the same line, overwriting the same line over and over again.
1. Clicked Text tool.
2. Dragged out a paragraph block.
3. Started typing and noticed that when it reached the end of the paragraph block, it just wrapped to the beginning.
View 3 Replies
View Related
