How to change the line spacing for fonts in IV2010?
Reason I ask is b/c I had to change fonts from RomanS to RomanD, b/c the former font wouldn't print clearly enough for the shop and customer to read it (both in pdf and dwg/dxf).
The problem is, RomanD has DOUBLE SPACING as default, instead of the usual single spacing. I can't get the "Styles" editor to change the spacing in the VIEW LABELS and WELD SYMBOLS.
through some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedWhen someone has pasted text in from microsoft office (word 2010) to a coreldraw x3 text block, I find the line spacing is in points (pt). I seem to be unable to change this to percentage. I'd like to change it to % so that text block matches my others created in coreldraw where linespacing is in %. Is there a way to change it to % once line spacing has become pt?
View 3 Replies View RelatedI have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View Relatedit's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedI am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies View RelatedThe text that we're using for the majority of our notations doesn't look very good at 1.0x scale so I try and adjust the paragraph line spacing to 0.8x as I go. I also know that if I create MTEXT and adjust the paragraph line spacing at the prompt it will "stick". However it doesn't stick for leaders and there's no real way of creating a permanent setting, is there?
Slight inconvenience of adjusting that setting each time I create a leader.
I normally use AutoCAD Electrical 2012 but my problem is AutoCAD so I thought I would log it here.In ACE there are default profiles for ACE and Vanilla AC. I use the Vanilla AC for basic CAD drawings.
I like the feature "Base Line Spacing" for dimensions, to state the obvious,BUT it I do some vertical dims then try to do some horizontal dims (both in base line spacing) the software wants to stay in vertical BSL.
I can find is to create a standard DIM, delete it, then i can do a selection of horizontal BSL.Is this how it works in AC2012? Or is it a function of ACE? There are some other functions in ACE that do not work in standard CAD under the CAD profile.
Is there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 Replies View RelatedIs there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies View RelatedIs there any way to create a single line stick type font in inventor. Everything comes in as a box type which is not ideal for selecting geomety once imported into cam software for machining/engraving. The model text will be extruded/embossed, but it it possible to get single line text in a dwg or idw that will import into cam software. It would be nice to be able to import the text from a inventor dwg,idw to a different level in mastercam to save time from having to redraw all the text in the cam software.
View 5 Replies View RelatedThe vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
how could I change all text-fonts from ISOCP to ISOCPEUR for all text-elemts in the drawing (in the frame, title etc.)?
View 2 Replies View RelatedWe have created 100's of drawings with inserted sketched symbols that has text which has been formatted with the font RomanS. Now that we have switched to DWF published documents, the font prints very light compared to Tahoma.
I was able to obtain all the text styles programatically and update the style to Tahoma. Unfortunately, updating the style does not effect text becuase the text was originally overriden to not use a text style.
Is there anyway via API to update the text in a sketched symbol to point it back to a Text Style?
In the Autodesk Inventor drawing (.idw) I am unable to change the font size when i dimension a hole and thread. I have tried going into "Edit Hole Note" and "Text" when you right click on the dimension.
View 3 Replies View RelatedI have questions in 2012 pipe network labels.
We are having problems with running out of space and would like to squeeze the line spacing between lines to get more room. We know how to do that in standard MTEXT but can't find the equivalent in the label settings.
I have also noticed problems getting dragged pipe labels to stack. I check the box to stack on drag, but it doesn't seem to do it. We created a separate stacked label style.
How do I change spacing when I use "dimbreak" on a "mleader"?
View 2 Replies View RelatedIm trying to change my letter spacing in my style and I cant seem to figure out how to do it. The picture here is my Autocad 2012 on the left and on the right is what I get from another company. How can I change my style so the lettering is more spaced out like the one on the right? This is not just for the tolerance box. All my dimensions have a similar problem where the text is not spaced out.
Such as if I make a dimension, it says "R.125" where there is no space between the "R" and ".125"
Inventor 2012.
How to make a macro that changes the font for a specific Text Style. The name of the Text Style is eg. "3mm", which I want to change from RomanS to Verdana.
I have a query. How do I change the color and font size of the RMC menu? I am using Autodesk Inventor 2012 Suite. I find it quite small and hard to see.
I have attached an image of it.
If I place a dimension and have text above and below the dimension line (using X), and then grip edit the dimension text to move it for space/clarity on plans, the text above and below the line will mysteriously move closer to the line. If I have backgrounds applied to the text, which I normally do, the backgrounds will cover the line. Even without the background, it looks odd next to other dimensions that were not grip edited.
Civil 3D 2011
Windows 7 x64
My iLogic ability is quite limited outside of what I use regularly?
I am trying to change the font style in every text definition in all my sketch symbols in one go. Actually I have started it based on only a selection set but I would be happy with just all symbols too. Below is where I got to, I am stuck on the For Each line to cover each text box in the symbol. Some of the other syntax may not be right either but I can't test it all the way through.
Dim oDoc As DrawingDocument: oDoc = ThisApplication.ActiveDocumentDim oSheet As Sheet: oSheet = oDoc.ActiveSheetDim i As LongDim oSymDef As SketchedSymbolDefinition: oSymDef = oDoc.SketchedSymbolDefinitions.Item(i)Dim oText As TextBoxesFor i = 1 To oDoc.SelectSet.CountFor Each oText In ............oSymDef.TextBoxes.Item(i).FormattedText ="<StyleOverride Font='ARIAL'>...< /StyleOverride>"NextNextInventorVb.DocumentUpdate()
Also the XML style override is not complete if this is the only way to achieve this result.
Inventor Professional 2013, Autodesk Simulation Multiphysics 2013
Windows 7 x64 Core i7 32GB Ram FX2000
I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies View RelatedI am new to Corel Draw, and I'm using a shiny new copy of X5. It seems like this should be ultra simple, and I don't know what I could possibly be doing wrong, but I have text in a Paragraph box and want to simply adjust the line spacing (leading), but no matter what mode I'm in the control does nothing.
I made sure that I wasn't missing a space or a return or something by using select all, I have used all three modes, which will change the spacing as I select a new mode, but changing the value in the spacing box does nothing. I can make it 2 points 100 points, 50%, everything I have tried does nothing at all.
I im new to photoshop, im trying to do some uni work on it and i want to add txt, but i need it to be double line spaced, and i have no idea how to do this on here, or even if its possible. If you know please help!! im not very good at technical things so if u try to explain please be clear and basic.
View 2 Replies View RelatedWhen applying Text when I hit enter to add a new line the spacing between lines is WAY too much where do I find how to set the line spacing. otherwise I have been creating new layers for each line which gets messy.
View 2 Replies View RelatedI was looking to change the fonts in a drawing for the Dimensions and Symbols that might have been inserted in the Dimension text entries.
This can be done manually bu editing the dimentions text after placemement, but I was ooking to set this as a default.. I cannot see where exactly this is controlled in the Styles Manager - I am only able to change the Dimension text font but the diameter symbol font is always on AIGDT.
I was therefore looking for an iLogicvb code that could do the trick, but I am not able to even change the dimension fonts... The code runs with no errors but nothing gets updated in the drawing...
Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
[Code]....
InventorVb.DocumentUpdate()
when using the arctext command I am not able to change the character spacing setting. Also, if I select the arc text which I created and select properties, then attempt to change the character spacing setting my AutoCAD 2010 system reads fatal error and crashes.
View 3 Replies View RelatedScreenShot108.jpg
left sketchup layout ... NOT ATTEMPTS TO BE VECTOR GRAPHIC PROGRAM
RIGHT X6
... left same 2squares line 2px and 2squares line 15px
... same line stile !!!! upper two have style spacing 0,2x and bottom 0,4x
... you can adlust the dot/line/ ... spacing !!!!!!!
... tried to do that in corel !!!! ??? no easy way :( ...
... in layout I set 0,21 0,3 0,4 1 1,2 ..... and immediately see the change not affecting
NOT AFFECTING LINE BRIGHTNESS
I am having an odd problem with Gimp all of a sudden, I NEVER play with line spacing and according to the input box, it is still set to 0. but Gimp still is double spacing my lines when I type using the text tool!!
View 2 Replies View RelatedWhen I write text in a free style I'm unable to adjust the line spacing anymore - it turns out much to big and whatever value I choose it's every time the same !?!When trying text in a box it's all OK, but I seldom use text in a box..I'm using PSE since 11/2012 and the problem occured just now.
View 2 Replies View Related