Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?
View 8 RepliesI need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies View Relatedi've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
I have an alignment for a proposed steel gas pipeline that is several thousand feet long. The alignment is stationed and set to display PI symbols (triangle) at each change of direction. However, steel pipe is relatively flexible so small changes in direction (a few degrees) are irrelevant and I do not want the PI symbols to display in those areas. Is there a setting (a tolerance so-to-speak) in Civil 3D to edit when PI symbols are displayed for an alignment. For example, I want to set it such that PI symbols are not displayed unless the alignment changes direction by more than 10 degrees at a given PI.
View 9 Replies View RelatedI want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
It is possible to create a table for an alignment as shown in the example attached?
View 1 Replies View RelatedI'm trying to add an alignment table, but the curves seem to be labelled twice. When I first labelled the alignment, the curves were C???, so I tried again. After a lot of messing around, I finally got C1, C2, etc., but the table lists C1 & then C?. I've thawed & turned on all the layers, but there aren't any C??? labels on the alignment. Another alignment in the same drawing worked fine.
View 4 Replies View RelatedIf there was any way to get deflection angles of an alignment into a table? I finally figured out how to get C3D to label them using the add note label. If this is not possible, is there a way to make a table of the notes? I am using C3D 2013 version if it makes any difference.
View 4 Replies View RelatedI need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies View RelatedI have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
I want to create a Curve table for an alignment.
You are able you get range of properties, i.e length, chord length, start/end chainages, mid-ordinate.
I've notice lets for arguement sake 'chord length' text component editor is: <[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> but is it possible to modify the code so i can insert half a chord length.
Ive tried
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]>/2 ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]/2> ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)/2]> ---- doesn't work
<[1/2*Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> ---- doesn't work
I have created an easement after I selected the line callouts and created my parcel table I realized I missed selecting one of my line labels and it is missing from my table. I know I can just erase the table and then reselect all line callouts to create a NEW table, but I was wondering if there was a way to just select the line callout I missed and have it added to the parcel table without recreating a new one.
View 3 Replies View RelatedIs there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.
View 9 Replies View RelatedThe stationing along my alignment line is missing. I do believe it was there yesterday at 5 but hey who knows. How do I restore it the PI stationing is there.
View 4 Replies View Relatedi have problem in changing line directions that i'm using in my alignment.like buttom figure.
View 6 Replies View RelatedI am just starting to use C3D 2013, and have just finished creating a new template for use in 2013 by importing the styles from our 2012 template. I am having an issue with an alignment style. The problem is that every line extension after the first one ends up being on the same layer as the curve (see attachment). They are supposed to be on a seprate layer as they were in our 2012 template.
View 1 Replies View RelatedC3D 2013, Win 7, 64 bit
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:
I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.
When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.
All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1.
All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......
Are these locked somewhere?
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
How can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
I am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedWindows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
I created view frames and sheets for a number of alignments. Is there a way to turn off a match line not associated with the main alignment for a particular viewport.
Or did I missed a setting somewhere that should turn this off automatically?
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies View RelatedI've created a Line & Curve table to display my metes & bounds. One of the curves is displaying an incorrect length, off by .01. It was caught as my project was reviewed by the city engineer. I went back to the database (Prospector --> Sites --> Parcels) and my mapcheck does conflict by .01.
Why is the mapcheck different from the Line / Curve table? How can I 'fix' the table to match the mapcheck data?
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
Is it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
i have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.
see the attached image. you can notice from the image that there is no a signle data..
Some times we have to insert a Tiff file into a drawing and sketch over the top of the image. Occasionally when I go to print the file all I get is a blank rectangle where the image should be. Now the image does show in the print preview and it will print out normally sometimes.
View 1 Replies View Related