AutoCAD Civil 3D :: Property Field Editor For Alignment Curve Table
Dec 29, 2013
I want to create a Curve table for an alignment.
You are able you get range of properties, i.e length, chord length, start/end chainages, mid-ordinate.
I've notice lets for arguement sake 'chord length' text component editor is: <[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> but is it possible to modify the code so i can insert half a chord length.
Ive tried
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]>/2 ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]/2> ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)/2]> ---- doesn't work
<[1/2*Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> ---- doesn't work
View 1 Replies
ADVERTISEMENT
Jun 1, 2010
I have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
View 9 Replies
View Related
Apr 12, 2012
How can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
View 5 Replies
View Related
Aug 7, 2013
I am displaying stationing for my points, the points were brought in with a user defined classification. Then a table was created with the classification.
Base file- table looks good / when I xref the table it loses the station formatting.
I even tried importing all my user defined tables and styles and still didnt work
Civil 3D 2012 SP3
View 2 Replies
View Related
Oct 18, 2012
Using C3d 2013.
Where do I find the PI data of an alignment object to plug into a mtext Field?
Field Category and Field Name and any other steps to locating it would be useful.
View 9 Replies
View Related
Apr 12, 2012
I am just wondering whether FIELD category can access the OBJECT DATA Table ?
I want to use a block to display its OD table's attributes as Annotation text , so that the Text will update when the OD table change.
Or do I need use the Data connection for this purpose ?
View 9 Replies
View Related
May 11, 2012
I am a fairly new user to C3D so this may seem simple.
Can I insert a point on an alignment at a particular Station?
View 2 Replies
View Related
Jan 4, 2009
I have an existing alignment issued to me which has been created using all straight lines even where there should be curves. I am trying to insert curves in these areas. Using free curves (2 entities and a through point) I create a curve then somethings happen I can't work out -
1. The curve is created but the original straight linework stays. I would have thought the original linework would automatically delete. See attached pdf between points 60 and 62 the curve and straights can be seen.
2. Then all stations after the curve are changed to the question mark symbol. If i click on the alignment all the grips are still there for the full length of the alignment, indicating the alignment is still in one piece.
3. If I try to create another curve further along the alignment it won't allow it. Stating on the command line "Selected entity must be part of the main entity."
I'm using C3D 2009.
View 9 Replies
View Related
Jul 16, 2013
What is the correct way to remove SE from any given curve on an alignment? I have calculated and the angency does not want SE on a particular curve.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 2 Replies
View Related
Sep 3, 2013
I'm in the process of going from LDD 2008 to Civil 3D 2012 and I'm having some difficulties with the profiles. In LDD there was a vertical alignment editor for profiles where I could edit the surface profile stations and elevations. Has that feature gone the way of the Dinosaurs or is it in Civil 3D somewhere?
Once in a while the profile doesn't pick up a curb line or a change in elevation. Its just simpler sometimes to add a station and elevation without going in and spending time editing the surface so the profile reads correctly.
View 9 Replies
View Related
Oct 11, 2010
I want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
View 1 Replies
View Related
Nov 18, 2013
It is possible to create a table for an alignment as shown in the example attached?
View 1 Replies
View Related
Sep 8, 2012
How to generate reverse curve details from the alignment
i.e. i want to generate
delta
length of reverse curve
transition length
deflection angle (delta) of transition curve
shift
etc ........
i want them to generate in the plan.
View 2 Replies
View Related
Jul 2, 2012
In LDT listing curve data was as easy as selecting an alignment, clicking edit and printing out a spreadsheet with all the required info. how to do this in C3D. Inifo I need:
Delta
DOC
Tan
Length
Radius
PC
PT
PI
View 3 Replies
View Related
Oct 7, 2012
I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:
I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.
When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.
All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1.
All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......
Are these locked somewhere?
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
View 9 Replies
View Related
Jan 7, 2013
I'm trying to add an alignment table, but the curves seem to be labelled twice. When I first labelled the alignment, the curves were C???, so I tried again. After a lot of messing around, I finally got C1, C2, etc., but the table lists C1 & then C?. I've thawed & turned on all the layers, but there aren't any C??? labels on the alignment. Another alignment in the same drawing worked fine.
View 4 Replies
View Related
Apr 2, 2013
If there was any way to get deflection angles of an alignment into a table? I finally figured out how to get C3D to label them using the add note label. If this is not possible, is there a way to make a table of the notes? I am using C3D 2013 version if it makes any difference.
View 4 Replies
View Related
Apr 2, 2013
Windows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
View 3 Replies
View Related
Jul 31, 2013
How the deflection angle can be shown in the horizontal alignment curve? I’m wondering if there is a way to automatically show the deflection angle of the horizontal alignment curve (attached)?
View 3 Replies
View Related
Sep 29, 2012
Can we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.
View 2 Replies
View Related
Aug 16, 2011
Is there anyway to reduce the extra space in the table rows. We finally ran into a situation on a job where the tables have to be smaller. So we ended up exploding the line & curve tables and manually adjusting the spacing.... Exporting the table data to excell would be useful, but cant find a way to do that. Reporting the line calls to html and copy clip to excell would work, but cant seem to do that either.
View 3 Replies
View Related
Jun 12, 2013
I have an alignment that is line and curve tagged for a table. The last segment of the alignment is a 3 point curve. It shows up in the alignment grid view, and is tagged. When the table is produced the everthing comes in except the 3 point curve I mentioned.
View 1 Replies
View Related
Oct 11, 2013
I've created a Line & Curve table to display my metes & bounds. One of the curves is displaying an incorrect length, off by .01. It was caught as my project was reviewed by the city engineer. I went back to the database (Prospector --> Sites --> Parcels) and my mapcheck does conflict by .01.
Why is the mapcheck different from the Line / Curve table? How can I 'fix' the table to match the mapcheck data?
View 7 Replies
View Related
Jul 26, 2013
I have 3 alignments running: EB, WB, and Center alignment. My corridor runs along the EB alignment. Is it possible for me to develop section views for this corridor along the Center alignment?
View 6 Replies
View Related
Mar 17, 2012
I need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies
View Related
Dec 4, 2012
Is it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
View 2 Replies
View Related
Dec 9, 2013
The vertical spacing in curve and line tables (the space between the text and the horizontal line) is too big. This makes the table too long and hard to fit on maps. For regualr tables, you can modify this. However, for curve and line tables this is not available. Is there a .NET file that creates/formats the tables that I could modify to reduce the spacing??
C3D 2012, but the same is true for 2014.
View 9 Replies
View Related
Dec 2, 2013
I need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies
View Related
Mar 21, 2013
Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?
View 8 Replies
View Related
Oct 3, 2012
When trying to etransmit a dwg from Civil 3D 2010 which has line/curve tags with tables built from them, we are getting output which has the table headers but no entries below. The cad user on the other end gets no line/curve data. The other user is on Civil 3D 2011.
View 5 Replies
View Related
Sep 18, 2012
How to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
View 3 Replies
View Related