I am just wondering whether FIELD category can access the OBJECT DATA Table ?
I want to use a block to display its OD table's attributes as Annotation text , so that the Text will update when the OD table change.
Or do I need use the Data connection for this purpose ?
I have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
AutoCAD Civil 3D 2009 w/Updates, Windows XP Pro, SP3
I am looking for a tool or routine to automatically add a unique object data ID number to Points or lines of a sewer system, that extract a prefix number from a seperate object data table (a location grid of closed polygons), then add a sequential number to each selected object. For example, 12 manhole points and 3 cleanouts are located with in one grid polygon. The Grid polygon has a coded id like 61280206, I want to be able to select all the MH and CO points in that grid polygon and have the new ID numbers be 6128020601, 6128020602, 6128020603, or to be able to specify the starting number like 6128020621,(for adding new points and continuing the sequence.
Better yet would be a routine that would be able to apply this system to all the points in the entire project area, extract the number from the appropriate grid polygon, and fill the numbers in one operation.
This is for the initial id numbering of a Cities, Sewer, water and electrical system.
I have searched for and found many LISP routines that do some of this (like ODCOUNT, etc), but none that I have seen have the data table extraction abilities. I do have one that works like this and files in the prefix number from a named views. I have several thousand grid cells (880ftx880ft). Perhaps there is a way to use my polygons w/table to create and name views
Using C3d 2013.
Where do I find the PI data of an alignment object to plug into a mtext Field?
Field Category and Field Name and any other steps to locating it would be useful.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
How can I Get table name of the object data of a selected layer, with C#.
View 4 Replies View RelatedI want to create a Curve table for an alignment.
You are able you get range of properties, i.e length, chord length, start/end chainages, mid-ordinate.
I've notice lets for arguement sake 'chord length' text component editor is: <[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> but is it possible to modify the code so i can insert half a chord length.
Ive tried
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]>/2 ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]/2> ---- doesn't work
<[Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)/2]> ---- doesn't work
<[1/2*Chord Length(Um|P3|RN|AP|GC|UN|Sn|OF)]> ---- doesn't work
How can I display the object data in a grid with vb.net and also add new features to the same layer along with the object data.
View 3 Replies View RelatedI have an alignment which is complete in all respects. Profile also has been finalized. now the the survey (joint cross section) has been carried out and the output is in the form of field books. we hav the data in formate like we hav km and than offset left and right and than elevation.
my question is that how to use this data in civil 3d for creating cross sections and computing earth fill quantities.
How can I display the object data of a layer in table format, with VB.net. or How can I display the attributes of a .SHP file, edit it and also add new point to it.
View 2 Replies View RelatedI have a 1 mile road topo coming up for design purposes. The curb is standard, but there is full curb & depressed curb. If you had your way from the CAD seat, what shots do you prefer?
Most accurate I've seen iis Centerline, Edge Pavement/Edge Concrete Gutter, Flowline Gutter, Face Curb, Back Curb. More fieldwork, but made a good product.
What I have seen is CL, EP, BC, then "let them just use a template" and several variations thereof.
I have never seen a good way to automatically offset from say BC only and handle depressed curb by field coding.
I'm attaching data to objects (attached data) and I'm unable to get the table option to open in a new window. I tried Field and the value is already set to 1. I'm using Map 3D 2012 .
View 1 Replies View RelatedI am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.
View 2 Replies View RelatedI want to export my slope - table - legend to an excel or txt file.
(Of course only the values)
Civil 3D (2013)
How to insert a linked excel table into my drawing, however I have not figured out how to add rows to the table, the option is greyed out. I can insert rows above and below the (inserted) table but not anywhere in the middle.
I've tried everything I can think of, even removing all the formatting in the .xls spreadsheet to no avail. The cells are unlocked, I can manipulate the data, but not being able to insert rows is really hindering the efficiency of using a data linked table.
I want to copy just two pieces of information from a pipe network into a table. I would just generate an automatic pipe table, but those are not editable. Any quick way to copy and paste the pipe lengths and names in a network into a "regular" table?
View 7 Replies View RelatedI need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies View RelatedRegarding the image below. What is the best procedure to develop such a table automatically in Civil 3D. We are using AutoCAD Civil 3D, and the table was developed with the TABLE command. Everything else was added manually.
View 1 Replies View RelatedI very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?
View 9 Replies View RelatedI've got a bunch of tags with a dedicated "tag mode" style, and if I select them individually I can add them to a table, no problem. However, if I try to do a mass selection of a swath of labeled lines or arcs i get the option to convert all non-tag labels to tag lables (I don't want that) OR don't add those labels not in tag mode (presumably keepin those that are). The problem I have is if I select the latter it deselcts everything. Am I missing something or does this not function as it implies (or at least how I wish it would)?
(running C3D 2012 sp4, Win7 64bit, 8GB)
See block attached.
I created an attribute called ScaleA1, which I want to double click on this block and enter that number.
Then I created a text object with 2 fields in it. The first field is set to read the Value of that Attribute. The second field is a formula (2*Value of Attribute).
However, instead of the field displaying the Value of the Attribute, it displays the Default of the Attribute.
I hope to fix this bug so that it will update when I change the attribute from paper space.
Currently it will only update if I go into the block editor and change the default of this attribute.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
(cdr (assoc 1 (entget (entnext (car (entsel))))) ...
gives the string value of the attribute, but i would like to retrieve the field value attached to that attribute.
We have a perenial problem with our old GIS software where files corrupt and drawing objects are lost.
There are few export options available, but export to shape is one of them. This means that I can export a damaged file and then import it into CAD with the layers intact and the tagged numbers (similar to object data or a block attribute in CAD) imported as object data. In order to make a new uncorrupted version for the GIS program.
Is there a way to select objects by object data?
If a file is corrupted, the only real way to repair it at the moment is to go back to the original cad drawing and reimport and then retag every single tagged attribute on what can be thousands of drawing objects, and by then we may no longer have the handdrawn data to even do that.
The next workaround is if I creat new dwgs from the cad drawing, Each one containing the objects with the same object data, and each saved with a file name that matches that object data, and then reimport into the GIS. (it can use the filename as a tag). This creates a new GIS file with the surviving information that should not lose any more data and we may be able to patch the 'holes' afterwards.
The problem is selecting all the polylines in the cad drawing that have that same tagged number in the object data. Select similar just goes on object type and layer. This would be easier if I could select by object data and get everything with the same tag in one go.
A way to batch create the new dwgs from that selected data would be nice too.
C3d 2013
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View RelatedHow can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
The gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures
View 1 Replies View RelatedIs there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
View 5 Replies View RelatedIs there a way to define object data to a polygon or a poly line in C3d? I imported a shape file and saw that in the properties dialog box the object data of the polygons is displayed. I would like to define create new polygons and define certain atrributes to it before exporting it as a shape file. This would would eliminate the need to use a GIS program to define the attributes of the polygons.
Im using PCSWMM and would like to define certain atributes to polygons and polylines in C3D before i import it in to PCSWMM.
im using civil 3d 2012 when I click the DEFINE OBJECT DATA icon the dialog box is not appear I don't know if I did wrong on my software.
View 2 Replies View RelatedAny way to create a parcel from an object (closed polyline) and populate the parcel with Object Data from the polyline?
I have imported a .shp file into a drawing and the result is many closed polylines with properties similar to the attached image. I would like to bring this data into a parcel object for labeling purposes.