Regarding the image below. What is the best procedure to develop such a table automatically in Civil 3D. We are using AutoCAD Civil 3D, and the table was developed with the TABLE command. Everything else was added manually.
View 1 RepliesHow can I rearrange the horizontale order of the table columns which made by (Extraction data).
I know how to rearrange it vertically, But horizontally that what I want to know. Example ( colomns order is : number, X, Y. How to change it to :X, Y , number )
how to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View RelatedCan we produce a Horizontal curve table like the attachment Table 1 and i have another queries could Civil 3d Produce a table like the attachment Table 2 i know i can get this table by lisp or macros.
View 2 Replies View RelatedHow to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
i have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.
see the attached image. you can notice from the image that there is no a signle data..
I want to export my slope - table - legend to an excel or txt file.
(Of course only the values)
Civil 3D (2013)
How to insert a linked excel table into my drawing, however I have not figured out how to add rows to the table, the option is greyed out. I can insert rows above and below the (inserted) table but not anywhere in the middle.
I've tried everything I can think of, even removing all the formatting in the .xls spreadsheet to no avail. The cells are unlocked, I can manipulate the data, but not being able to insert rows is really hindering the efficiency of using a data linked table.
I am just wondering whether FIELD category can access the OBJECT DATA Table ?
I want to use a block to display its OD table's attributes as Annotation text , so that the Text will update when the OD table change.
Or do I need use the Data connection for this purpose ?
I want to copy just two pieces of information from a pipe network into a table. I would just generate an automatic pipe table, but those are not editable. Any quick way to copy and paste the pipe lengths and names in a network into a "regular" table?
View 7 Replies View RelatedI need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies View RelatedI have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
I am not in soft select mode. If I go to Soft Select I can see the CV's. But when I right mouse click to select CVs they are invisible. If I drag to select I can grab them, but they are still invisible and it's getting really difficult to manipulate things right now.
View 2 Replies View RelatedIs it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View RelatedI don't see the RGB in curves in the develop module and it still shows brightness. In fact it looks just like LR3? Just downloaded upgrade. What's going on?
View 9 Replies View RelatedHow can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
I just upgraded to LR 5 from 4. Shortly after starting to use it, I noticed Tone Curves, Details and Effects are all missing in the Develop mode. I re- downloaded and installed with no return of the missing tools. How do I get them back.
View 3 Replies View RelatedHow can I change the horizontal line color of a table (not the border line color)? I would like the border to be black, but the horizontal lines to be gray.
View 9 Replies View RelatedIs there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedIs that possible to read the Autocad Table data , without opening the Autocad from VB.NET. I tried with opening one autocad then loading the source dll. it was working perfectly.
But i need to without opening a application its possible or not?
How can I Get table name of the object data of a selected layer, with C#.
View 4 Replies View RelatedI am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.
using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void.
[code]....
Most people that I work with don't use autocad map, they use the regular Autocad. So they can not access the table data of my vectors. Is it possible to transform the table data that I choose and place it as text in the appropriate place ?
View 2 Replies View RelatedHere is what i would like autocad to do
I work in architecture, and every time i create an opening (door, window) i add a block next to it with an attribute to the reference number
I was wondering if it would be possible when creating that little block to give it more information and later on extract the information from it to a table
Ex: door 106-02, steel finish, 3'x7' , isolated, steel frame, 2" thick etc.
I have a table in excel and I'd like to have text in cells link to nodes on a map.
i.e. I have the traffic volume of a road section in a table. I'd like to show that volume on a map beside a circle where the count was taken. I'd like to be able to update the table value and have it also update on ythe map.
If it is possible to plot points (or a PLine, or a mesh) in AutoCAD from a table of values in EXCEL (columns of x,y,z coordinates).
View 8 Replies View RelatedI am using data extraction and data linking to an excel file to count blocks and list details. I need to be able to update automatically and the most trouble I have been having is that I need the images of the blocks to come out in the table as well. so far only have been able to get the text data to come out in the table.
View 3 Replies View RelatedI am having problems regarding Data Table Types.
I utilize Excel to build BOM's. I import them through data connection, I than will tell it which cells are Headers / Data / Titles. At which point text sizes / styles ... are applied.
Problem,
I have a cell that is enlarged with small text in the middle. I can orientate the boxes to increase in the Vertical or Horizontal directions larger than the original Excel Data File but i cannot get them to shrink?
I want .05" on the left / right of the widest data, and .02" on the top and bottom. If i change Vertical to .02 it puts the text at the top of the cell.. but if i put it at 1, it enlarges the cell and places it in the middle.
Horizontal i want .02 from the left, but if i align left it goes all the way to the left line.
Can a table format re-define an external excel spreadsheets cell lengths? Obviously taking into account if Wrap text is Enabled it takes the width and defines only the height?
I have a pdf xref with a polygonal clip applied. I'd like to change the shape of the clipping area and need to add vertexes to do so.
How can I add a vertex to a polygonal pdf clipping?
Usually I can just select a vertex and pressing crtl will cycle through add vertex, remove vertex, and if it's a line segment, change to an arc. When I select the vertex of a polygonal vp clip I can't do this.