I utilize Excel to build BOM's. I import them through data connection, I than will tell it which cells are Headers / Data / Titles. At which point text sizes / styles ... are applied.
Problem,
I have a cell that is enlarged with small text in the middle. I can orientate the boxes to increase in the Vertical or Horizontal directions larger than the original Excel Data File but i cannot get them to shrink?
I want .05" on the left / right of the widest data, and .02" on the top and bottom. If i change Vertical to .02 it puts the text at the top of the cell.. but if i put it at 1, it enlarges the cell and places it in the middle.
Horizontal i want .02 from the left, but if i align left it goes all the way to the left line.
Can a table format re-define an external excel spreadsheets cell lengths? Obviously taking into account if Wrap text is Enabled it takes the width and defines only the height?
I've created a table (a door schedule for example).The data cell type properties is "general". The door # is "001". When I type this in, it switches to just "1" and the type is swiched to "whole number." Same for another cell with a number in it, it switches the cell type on me and I don't want what it switches to. Every time I try to switch it back it doesn't do anything.
How do I stop it from automatically switching, or at very least let me override?
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
I am new to developing for AutoCAD. I am using VB.NET to create a table, as standard the first row of the table is a Title row, I want to change this to a data row. How to do this?
Is that possible to read the Autocad Table data , without opening the Autocad from VB.NET. I tried with opening one autocad then loading the source dll. it was working perfectly.
But i need to without opening a application its possible or not?
I am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.
using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void. [code]....
am trying to edit Family table as per my requirement. In the family table editor, the columns for " Sectional area, Moment of Inertia, Section modulus etc...." are available. These kind of properties have to update manually or there is any option available to generate autmatically ?
Warning 1 'Public Overridable Sub SetCellType(row As Integer, col As Integer, type As Autodesk.AutoCAD.DatabaseServices.TableCellType)' is obsolete: 'Use Cell functionality instead.'
Then i tried:
Tbl.Cells(0, 0).CellType(TableCellType.BlockCell)
result:
Error 1 Property access must assign to the property or use its value.
Most people that I work with don't use autocad map, they use the regular Autocad. So they can not access the table data of my vectors. Is it possible to transform the table data that I choose and place it as text in the appropriate place ?
I work in architecture, and every time i create an opening (door, window) i add a block next to it with an attribute to the reference number
I was wondering if it would be possible when creating that little block to give it more information and later on extract the information from it to a table Ex: door 106-02, steel finish, 3'x7' , isolated, steel frame, 2" thick etc.
I have a table in excel and I'd like to have text in cells link to nodes on a map.
i.e. I have the traffic volume of a road section in a table. I'd like to show that volume on a map beside a circle where the count was taken. I'd like to be able to update the table value and have it also update on ythe map.
I am using data extraction and data linking to an excel file to count blocks and list details. I need to be able to update automatically and the most trouble I have been having is that I need the images of the blocks to come out in the table as well. so far only have been able to get the text data to come out in the table.
Just for kicks, make a lot of changes to a Content Center family table, and then accidentally hit the ESC key, thinking it will back you out of what you are typing.
But seriously, ESC while editing any field of a CC family table, EXITS the editor, losing anything you've typed in up to that point. URL....
I've started having problems when trying to edit text in table cells. Sometimes I double click and all is ok. Sometimes it wont let me select anything in the cell. Sometimes I have to select the cell, then right click to edit text. I get this message:
Is this likely to be a hardwear issue, and the pc is struggling to run AC correctly with all the other crap my company has running in the background? Or is there a systems setting that may have been changed, for whatever reason?
Is there any way to do this in Autocad? Split a table so it is in 2 sections side by side, rather than one verrrrrry long one? Similar to what you can do in Inventor?
I am trying to insert a table using a data link. I set up the Link through the DataLink manager and then insert the table using a range. I click OK to insert the table and after a few seconds of thinking ACAD sits there with no table on the screen. When I look in XREFs, the DL is there but says it is unrefrenced. Tried multiple ways of entering or setting up information to no avail.
How to insert a linked excel table into my drawing, however I have not figured out how to add rows to the table, the option is greyed out. I can insert rows above and below the (inserted) table but not anywhere in the middle.
I've tried everything I can think of, even removing all the formatting in the .xls spreadsheet to no avail. The cells are unlocked, I can manipulate the data, but not being able to insert rows is really hindering the efficiency of using a data linked table.
i get an error message telling (invalid thread data table. Please check Thread.xls file.i tried to reinstall the windows and the autodesk inventor but the error keep appearing.
1.my os is windows xp sv2 32 bit
2. inventor version is 2011 32 bit i also had the same problem with 2010
3. i tried to reinstall without any antivirus on my pc but i still have the same problem
4. what's a UAC?
5. yes i've office 2007 installed & i had tried with office 2003 but also the same problem.
1 the first time i used, i made the bolted connection once, but at the second time i kept having this issue.
2 my last trial was installing a freh copy of the windows then install office and the inventor only but nothing changed
3 i tried to install the inventor on another pc but i also had the same issue
4 i searched the c drive for the file THREAD.xls, and i found three of it and i guess they are fine.
I found out you can export the data table of feature properties from an SDF connection by choosing Options > Select All and then Options > Export and obtained a .csv file I was able to bring in Excel...but there are no headings for the data. How to export the column headings as well?
I created a link to an Excel file to create a table. Before I ETransmit the AutoCAD file (along with many other files) I want to remove the link so that the table is embedded with no need for the external file. When I have somebody who doesn't have the linked file on their machine open the file they get a "missing external file" message" despite the fact that I ran the detach data link command and have purge selected in the ETransmit setup. The table shows up with the data, but I want to eliminate the nag pop up about the missing file. I know you can click the ignore button, but I don't want our customer to have to bother with it.
Any way to save a list of files for ETransmit like you do in a .dsd file for batch plotting?
The attached image shows a table that I created as a AEC Object from my Civil 3D Alignment (i can turn it to 'MText' and then 'Text' in one or two steps). What I need is a routine, or anything, that fills the third column with an information based on the second column: the deflection angle, something like that:
Curve Angle Type of angle
C1 22°30'00'' 2
C2 39°21'28'' 3
C3 44°59'59'' 3
C4 45°00'00'' 4
C5 45°00'01'' 5
Is there something I could read to study to solve it myself and specify my own angles/types of angles?
I have a table which is linked to a datalink from Excel. The table and contents (text) show up in paperspace; however, only the table frame shows up within the plot preview, or when I try to plot it. The text does not show up.
I recently decided to see how the AutoCAD tables work. I was very happy to learn you could link your Excel spreadsheets with CAD. But now I have a problem.
After inserting the table it refuses to use the table style I have set up. The fonts do not want to change at all. I can change the colour of the text, but not the font.
