AutoCAD Civil 3D :: Sample Line On Alignment With Spiral

Aug 29, 2013

I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut  down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: How To Find What Spiral Type Has Been Drawn In Alignment

Jul 3, 2013

I have got a drawing with an alignment containing spiral-curve-spiral entities. I need to find what type of spirals are used in these entities - clothoids, cubic parabolas or other. Is there any way, to find it? In panorama and sub-entity editor there is only spiral description without exact type.

View 2 Replies View Related

AutoCAD Civil 3D :: Export Alignment And Sample Lines

Feb 15, 2013

I have an alignment with sample lines, I need to export these to a new drawing. i tried export/import land xml, but it did not work.

View 4 Replies View Related

AutoCAD Civil 3D :: Place Sample Lines Along A Very Sinuous Alignment

Jun 27, 2013

Im trying to place sample lines along a very sinuous alignment and about a third of the way down all of a sudden the little tracking marker jumps to what seems like thousands of kilometers away and starts tracking along some invisible alignment which does not exist?

I have tried everything I can think of from every type of sample line creation option to recreating the alignment and auditing the drawing. Nothing I do creates different results. Is this an alignment issue and being cause by all the tight bends?

View 3 Replies View Related

AutoCAD Civil 3D :: Changing Alignment Direction Where Feature Line And Alignment Coincide?

May 28, 2012

i've made a serpantine curve that starts from one line of alignment and end on the other line.

i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?

View 3 Replies View Related

AutoCAD Civil 3D :: Sample Line Frequency

Jun 4, 2013

I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).

Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).

how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.

View 6 Replies View Related

AutoCAD Civil 3D :: Sample Line Object Snaps?

Jan 9, 2013

I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?

View 2 Replies View Related

AutoCAD Civil 3D :: Sample Line Name Duplicated Exception

Dec 23, 2013

In Civil 3D we can create several new sample line groups and their sample lines can have the same name in other sample line groups.e.g

SLG_1:   

Sample line names:

1
2
3
4

SLG_2:   

Sample line names:

1
2
3
4

However, If I create a new sample line group with API and after new sample lines, if other sample line name(of other SLG) has the same name, Civil 3D throws Exception.

View 2 Replies View Related

AutoCAD Civil 3D :: Export Coordinates Table Of Sample Line?

Apr 15, 2012

 I'm designing a road, but I have a trouble how to export coordinates table of sample lines?

I need a table of coordinates X,Y of sample lines.

View 9 Replies View Related

AutoCAD Civil 3D :: Sample Line Increment Not Respected At Start

May 13, 2013

Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment.  This is a defect that needs fixing.

Meanwhile you'll find me typing in the 93 locations for my sample lines.  I believe this is what we made computers for.

View 9 Replies View Related

AutoCAD Civil 3D :: Sample Line Stationing Text Not Updating

Jan 14, 2013

I have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Change Labeling Of Sample Line Style

Sep 26, 2011

I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.

View 4 Replies View Related

AutoCAD Civil 3D :: Sample Line / Surface And Cross Sections

Nov 22, 2013

I'm working on cross sections and ran into a problem.  I had to edit my surface but it wouldn't cooperate with me.  So instead, I just erased the whole surface and restarted it.  After I got my surface the way I like it, I added my sample lines to where they are supposed to be.  Problem is, my cross sections turned out blank.

So for now, I skipped to create a surface profile and see both of my surfaces available on the bottom.  The old one I deleted and the newly created one.  It won't let me go to the bottom and erase the old deleted surface.  When I go into my toolspace-prospector....it only shows my newly created surface and nothing more.  Is this a reason why my cross sections come up blank?

I'll show you a pic of my toolspace with just the current surface and another pic of the "create a surface profile" showing that it still has both the old and new (all in CAPS) but it won't let me delete the original.

HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1

View 5 Replies View Related

AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask

Jun 17, 2013

Where is the setting for the sample line label background mask?  I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible.  I'd like to turn it off.  I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines. 

View 1 Replies View Related

AutoCAD Civil 3D :: Export Point Coordinates And Elevations Along Sample Line

Sep 4, 2012

I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines.  The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.

For instance, at station 1+00 of the alignment  we have a sample line.  We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment.  Primarily, whole contour intervals but more information would be useful as well.  I was hoping this could be automatically generated.

View 5 Replies View Related

AutoCAD Civil 3D :: Don't Find SampleLineLabel Property In Sample Line Class

Dec 23, 2013

In "SettingsSampleLine.SettingsStyles" there are the default properties:

 SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;

but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?

View 1 Replies View Related

AutoCAD Civil 3D :: Create Sample Line On Option By A Range Of Stations

Nov 20, 2012

I create the sampleline on the option "by a range of stations" so the sample lines were created on the horizontal geometry points. When I change the geometry of the alignament, the sample lines's local change or I need to do the process all over again?

View 1 Replies View Related

AutoCAD Civil 3D :: Add Sample Line To Existing Group - Redistribute Graphs FAIL

Nov 18, 2013

[URL]

Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.

PPD        E P I C           F A I L

There is some unbelievable gaps in the software but how do you let this one go on for so long?  

Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012

View 1 Replies View Related

AutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length

Oct 21, 2013

I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way? 

View 1 Replies View Related

AutoCAD Civil 3D :: Material Volume Table Stationing Doesn't Match Sample Line Group

Mar 5, 2013

(I'm using Civil 3D 2011)

I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]

View 2 Replies View Related

AutoCAD Civil 3D :: Stationing Along Alignment Line Is Missing?

Jun 27, 2013

The stationing along my alignment line is missing. I do believe it was there yesterday at 5 but hey who knows. How do I restore it the PI stationing is there.

View 4 Replies View Related

AutoCAD Civil 3D :: Changing Line Direction In Alignment?

May 10, 2012

i have problem in changing line directions that i'm using in my alignment.like buttom figure.

View 6 Replies View Related

AutoCAD Civil 3D :: 2013 Alignment Line Extensions?

Oct 15, 2012

I am just starting to use C3D 2013, and have just finished creating a new template for use in 2013 by importing the styles from our 2012 template.  I am having an issue with an alignment style.  The problem is that every line extension after the first one ends up being on the same layer as the curve (see attachment).  They are supposed to be on a seprate layer as they were in our 2012 template. 

View 1 Replies View Related

AutoCAD Civil 3D :: Sample Line Volume Report And Surface Volume Give Different Quantities

Jun 18, 2012

I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.

My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.

The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.

What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.

View 2 Replies View Related

AutoCAD Civil 3D :: Create Feature Line From Alignment / Profile?

Oct 25, 2013

C3D 2013, Win 7, 64 bit

When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment.  I made sure I selected the correct profile, and I even deleted all other surface profiles just in case.  But it still gives me a wonky feature line for the entire alignment.

However, in the same file, other profiles have worked perfectly. 

View 8 Replies View Related

AutoCAD Civil 3D :: Alignment Line / Curve LTscale Won't Change

Oct 7, 2012

I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:

I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.

When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.

All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1. 

All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......

Are these locked somewhere?

Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3

View 9 Replies View Related

AutoCAD Civil 3D :: Elevation Table From Alignment Or Feature Line?

Mar 17, 2012

I need elevation data from a surface.  I need an elevation every 15' along an alignment or feature line.  I would like the information as a table.  I am not sure how to do this.

View 5 Replies View Related

AutoCAD Civil 3D :: More Vertices On Curve For Dynamic Alignment Feature Line

Apr 2, 2013

Windows 7, 64 bit, Civil 3D 2010

I'm trying to create a surface using feature lines.  I have an alignment and profile that I have created a dynamic feature line.  However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.

Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?

View 3 Replies View Related

AutoCAD Civil 3D :: Way To Turn Off Match Line Not Associated With Main Alignment For Particular Viewport

Dec 19, 2013

I created view frames and sheets for a number of alignments.  Is there a way to turn off a match line not associated with the main alignment for a particular viewport.  

Or did I missed a setting somewhere that should turn this off automatically?

View 4 Replies View Related

AutoCAD Civil 3D :: Inserted Alignment Line Table - Printing Too Small

Mar 21, 2013

Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?

View 8 Replies View Related

AutoCAD Civil 3D :: Created Sheet Does Not Show Vertical Alignment Data (Line And Curves)

Sep 15, 2013

i  have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.

see the attached image. you can notice from the image that there is no a signle data..

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved