AutoCAD Civil 3D :: Add Sample Line To Existing Group - Redistribute Graphs FAIL
Nov 18, 2013
[URL]
Bring that back from the archives... because I am still very fond of redoing hundreds of cross sections because you're incable of redistributing the graphs when a sample line is added to a an existing group... and blow up all of the projections well done.... way to leave out a super critical dynamic component.
PPD E P I C F A I L
There is some unbelievable gaps in the software but how do you let this one go on for so long?
Dell Precision T3500 - Xenon W3550 @ 3.07 (4 core)
Ram @ 12Gb
64bit Win7 Pro
Samsung SSD
NVIDIA Quadro 2000 - Dual Monitors
Cat 6 network with GlobalScape Avail Agent - WAFS
Infrastructure Design Suite Premium and Civil 3D 2012
View 1 Replies
ADVERTISEMENT
Mar 5, 2013
(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
View 2 Replies
View Related
Apr 11, 2008
How or if you can add sample lines to a specified group? I created a group only to realize that there are some specific stations I need. I do not want to re-create the group and re-assign the materials nor reproduce my volume reports. I just want the section plotted on my sheets.
View 3 Replies
View Related
Jun 4, 2013
I have a road corridor and need to create sample lines at a 50m interval, as well as at every horizontal and vertical turning point. While the 50m stations and the horizontal turning points are easy to add (using the alignment), I can't seem to find where/how to add the vertical points (they have to be extracted from the profile).
Running the Feature Line Report I noticed the horizontal turning points are not used in the report: it only reports the 50m stations (so I guess the same will happen to the vertical points?).
how to add the vertical turning points to the sample line group and how to include both horizontal and vertical points in the Feature Line Report.
View 6 Replies
View Related
Jan 9, 2013
I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?
View 2 Replies
View Related
Aug 29, 2013
I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.
View 9 Replies
View Related
Dec 23, 2013
In Civil 3D we can create several new sample line groups and their sample lines can have the same name in other sample line groups.e.g
SLG_1:
Sample line names:
1
2
3
4
SLG_2:
Sample line names:
1
2
3
4
However, If I create a new sample line group with API and after new sample lines, if other sample line name(of other SLG) has the same name, Civil 3D throws Exception.
View 2 Replies
View Related
Apr 15, 2012
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
View 9 Replies
View Related
May 13, 2013
Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. I believe this is what we made computers for.
View 9 Replies
View Related
Jan 14, 2013
I have some sample lines that highlight utilities needing a section view. I've now moved my sample line to highlight the true cross section stationing for these crossings. Why doesn't the station value update for the sample line once this is moved. For some reason I remember the station text on the sample line updating itself automatically in the past.
View 2 Replies
View Related
Sep 26, 2011
I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.
View 4 Replies
View Related
Nov 22, 2013
I'm working on cross sections and ran into a problem. I had to edit my surface but it wouldn't cooperate with me. So instead, I just erased the whole surface and restarted it. After I got my surface the way I like it, I added my sample lines to where they are supposed to be. Problem is, my cross sections turned out blank.
So for now, I skipped to create a surface profile and see both of my surfaces available on the bottom. The old one I deleted and the newly created one. It won't let me go to the bottom and erase the old deleted surface. When I go into my toolspace-prospector....it only shows my newly created surface and nothing more. Is this a reason why my cross sections come up blank?
I'll show you a pic of my toolspace with just the current surface and another pic of the "create a surface profile" showing that it still has both the old and new (all in CAPS) but it won't let me delete the original.
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
View 5 Replies
View Related
Jun 17, 2013
Where is the setting for the sample line label background mask? I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible. I'd like to turn it off. I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines.
View 1 Replies
View Related
Sep 4, 2012
I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
View 5 Replies
View Related
Dec 23, 2013
In "SettingsSampleLine.SettingsStyles" there are the default properties:
SampleLineSampleLineLabelSampleLineLabelStyleIdSampleLineStyleIdSettingsSampleLine estiloLM = CivilApplication. ActiveDocument. Settings. Get Settings<SettingsSampleLine>();string NombreEstilo=estiloLM.Styles.SampleLine.Value;string NombreEstiloEtiqueta = estiloLM. Styles. SampleLineLabel. Value;
but I don´t find SampleLineLabel property in Sample Line Class¿?Is that property in sample line group?
View 1 Replies
View Related
Nov 20, 2012
I create the sampleline on the option "by a range of stations" so the sample lines were created on the horizontal geometry points. When I change the geometry of the alignament, the sample lines's local change or I need to do the process all over again?
View 1 Replies
View Related
Oct 21, 2013
I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way?
View 1 Replies
View Related
Jun 18, 2012
I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
View 2 Replies
View Related
Oct 3, 2012
I want to make a dll from a sample project by selecting one as an existing project in visual studio 2010. My attempts get me to an empty file folder. How can I do it correctly?.
View 1 Replies
View Related
Aug 29, 2012
Is there a way to project just one feature line (or anything appropiate...polyline, 3d poly etc) into the sections group or profiles ?
The thing is that Projection tool, labels everything that's a Block, Point, 3d poly ...etc to the sections group.
And it puts all labels in the same layer.
My project theme requires to project forest limit on every section. This is appearing on the survey as a polyline along the road. Civil Engineer / Infrastructure of metropolitan transports [URL]
View 4 Replies
View Related
Jan 11, 2013
i have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies
View Related
Dec 15, 2013
I don't undrstand why my assembly line increased after the existing surface in cut and fill condition, it should be stop at the existing surface. due to this problem my cut and fill quantities is not coming accurate. I'm attaching the screens shot of section. I'm using civil 3d 2009 32 bit software.
View 4 Replies
View Related
Aug 2, 2012
I have an existing surface with a steep slope and a feature line for the edge of a proposed walkway. I need a buffer of 25m on either side of the walkway but offsetting doesn't take the grade of the slope into account. How do I grade down the hill from the feature line at 25m to match to the existing surface?
View 3 Replies
View Related
Aug 21, 2012
Undefined group code 10 for object on line 2106.
Invalid or incomplete DXF input -- drawing discarded.
I created stream profiles in RASPLOT using its DXF Editor but when I try to open up the DXFs in AutoCAD I get the above error.
View 3 Replies
View Related
May 15, 2012
While I was out, my partner somehow now has two existing ground lines in my cross-sections. ####exist and ####exist (1). They are offset by about .5 feet left to right. Where do I remove the surtface ###exst (1) from the cross sections. I am looking now.
View 2 Replies
View Related
Apr 1, 2012
Any way to convert all of the single line text in exisitng drawings to multiline text without having to do them individually in Civil3d.
View 2 Replies
View Related
Aug 25, 2009
When you're editing a gradient within the shape (as opposed to in the Gradients palette), is there any way to use the eye dropper tool to sample an existing color? In-shape gradient editing (or whatever Adobe calls it) is useless without the eye dropper.
View 24 Replies
View Related
Jul 31, 2013
In a lab the students get this kind of graphs to later be processed in an axial system: a grayed pencil draw, very delicate, with all the imperfections in weight, intensity, etc.
We need to obtain an uniform line (a solid one, without gray variations, same weight, etc)
Autotrace seems the best tools although the results appear a little irregular. What could be the best approach as we have hundreds to process?
Beginning with the scanning (more resolution?) and processing firstly in Photoshop?
View 9 Replies
View Related
Mar 11, 2013
I have a detailed graph that is created in Excel that I want to paste into Illustrator so that I can save it as a high resolution TIFF file for submission to a journal.
In Excel the graph looks like this:
But when I select it (using Select Objects and then Copy OR Copy as picture) and paste it into Illustrator, it looks like this:
I have used different line formats in Excel for the different curves that are plotted and these obviously don't come through correctly when pasting into Illustrator. The lines are there but the scaling for the dashes or dots seems to be changed (increased). I'm good with Excel but a bit of an Illustrator newbie, why this is happening and can it be corrected.
I am on Win 7 64 bit system using Office 2010 and AI CS6
View 5 Replies
View Related
Apr 24, 2013
I'm trying to create a line graph in Illustrator CS5, with a data set that contains some numbers, but then has gaps before a final number at the end. The graph needs to show a general trend between the gaps.
Is there a way of forcing Illustrator to draw a line between those figures, as it's just leaving a gap in the graph at the moment.
View 4 Replies
View Related
Feb 13, 2013
I am trying to stick with one program(Autocad) and not use Softree, but when someone graphically represents something in Softree it looks way more professional than the profiles and cross sections I am creating in autocad. Is there any way to make these graphs look more professional other than tweaking in Edit View Style?
View 4 Replies
View Related
