I created view frames and sheets for a number of alignments. Is there a way to turn off a match line not associated with the main alignment for a particular viewport.
Or did I missed a setting somewhere that should turn this off automatically?
i've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
I am trying to turn off some markers shown below in magenta (the circles). The problem is, I've gone through the Alignment Styles and can't seem to locate the layer that these markers are actually part of.
View 4 Replies View RelatedMy alignments have been created not under Sites and I am copying them to different Sites as needed. I am copying appropriate profiles along with them - an existing from surface and 1 proposed.
1. Should I copy the Profile Views? - will this create a copy of the profile view directly over the original profile view?
What are the benefits / disadvantages of copying / not copying the profile view along with the profile?
More importantly,
2. How do I turn OFF-ON copies of the alignments and annotation in my Plan View?
If I right-click alignment properties in a Site and set the Object Style to NO DISPLAY - this turns off the alignment, but not the annotation.
If I right-click on the alignment labels, Edit Alignment Labels - I am looking at a complex dialog box with lots of drop downs - a bit lost in here. What about a 1-click setting to NO DISPLAY the layers like I can find for the alignment itself?
Do I need to create/copy a bunch of new Styles? Not sure exactly where to go or start.
I am working in C3D 2011. The end station on my alignment is 163+02. The last major station label is 163+00. The label text overlap. I want to turn off the end label of 163+02. The end station is not checked in my Alignment Style or in the Geometry Points style. I am assuming there is a command in the Settings/Alignment/Commands that is overriding the changes I have made in individual styles. I have found some post concerning this from 2004 but they do not seem to be applicable in 2011.
View 5 Replies View RelatedUsing the DAta Connections tool under Planning and Analysis, also known as Map 3D, I have attached a series of shapefiles and I want to be able to toggle the view of some of them on or off depending on the viewport. Is this possible to do?
View 5 Replies View RelatedI have an alignment for a proposed steel gas pipeline that is several thousand feet long. The alignment is stationed and set to display PI symbols (triangle) at each change of direction. However, steel pipe is relatively flexible so small changes in direction (a few degrees) are irrelevant and I do not want the PI symbols to display in those areas. Is there a setting (a tolerance so-to-speak) in Civil 3D to edit when PI symbols are displayed for an alignment. For example, I want to set it such that PI symbols are not displayed unless the alignment changes direction by more than 10 degrees at a given PI.
View 9 Replies View RelatedC3D 2013 ... Windows 7 Enterprise 64
Take a look at this DWG. Elements in The Alignment Style are colour: ACI 1 (red).
The CTB plot style (in the attached zip) returns ACI 1 as black (layout page-setup: display using plot style)
BUT ... The Alignment elements are grey in the paper space viewport !!!
I'm having a very annoying problem where the color and lineweight of my alignment in a viewport is not what it's set to be. I have an alignment with a style that sets all the linework components to a layer named C-STRM-CNTR-N, the color is set to BYLAYER, the linetype set to Continuous, and lineweight set to .80mm (see style_and_layer_screenshots.png). The layer C-STRM-CNTR-N has Cyan as the color, which shows in the Alignment Style dialog box (see style_and_layer_screenshots.png). In the model space everything looks fine (see c3d_model_space_screenshot.png). But in my layout, the alignment is a different color and lineweight (see c3d_layout_screenshot.png).
At first I thought maybe the alignment wasn't on the correct layer, but I checked and it's set correctly. Then I checked to see if the layer C-STRM-CNTR-N had a different color set for the viewport through the layer manager, but it's set to Cyan just like it's supposed to be. I went to the model space and noticed the color is correct. Frustrated and at a loss, I closed C3D, then reopened it and the problem is still there.
Why I can't change the lineweight nor the color of the alignment in this viewport? If I change either of those two settings in the Alignment Style Dialog box nothing changes, but the linetype does change.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I am using Civil 3D 2011 because of a contract. Monday I created the View Frames and cut the sheets. As of this morning everything was printing properly. Over the day I added alignment labels to the sheets and other call outs, and now the Match Line text is not printing.
I have moved the match line object to the top of the drawing order, double checked the layer to verify that it is not set to no plot, and verified that the xref with the match line is on the top of the drawing order.
Attached is a screen capture of the corner PDF I plotted.
I've got a project where the match line labels constantly reset to the left and right of the match line itself even though I've set it to be middle. I didn't have this problem with 2013 or earlier, so is it a possible bug?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.
View 9 Replies View RelatedThe stationing along my alignment line is missing. I do believe it was there yesterday at 5 but hey who knows. How do I restore it the PI stationing is there.
View 4 Replies View Relatedi have problem in changing line directions that i'm using in my alignment.like buttom figure.
View 6 Replies View RelatedI am just starting to use C3D 2013, and have just finished creating a new template for use in 2013 by importing the styles from our 2012 template. I am having an issue with an alignment style. The problem is that every line extension after the first one ends up being on the same layer as the curve (see attachment). They are supposed to be on a seprate layer as they were in our 2012 template.
View 1 Replies View RelatedC3D 2013, Win 7, 64 bit
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
I am setting up a template for my company and have noticed that I can't change the line/curve/spiral LTscale:
I have chosen a layer with the CENTER linetype for my line/curve/spiral in the style editor. The Alignment appears correctly with the CENTER linetype. However I want to make the dashes a bit bigger, so I change the LTscale in the style editor to 4, but then nothing changes.
When I change the same setting for the "line_extensions" element to the same layer, these WILL update when changing the LTscale.
All my LTSCALE, PSLTSCALE, MSLTSCALE are set to 1.
All other lines, such as polylines and featurelines, as well as the line extension lines of the alignment update correctly. Its just the alignment line.curve/spiral elements that do not.......
Are these locked somewhere?
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
I need elevation data from a surface. I need an elevation every 15' along an alignment or feature line. I would like the information as a table. I am not sure how to do this.
View 5 Replies View Related(I'm using Civil 3D 2011)
I have a corridor with an associated sample line group, and I have produced some material volume tables to give me quantities for my corridor structures and cut/fill volumes. When I look at the material volume tables they are at a seemingly arbitrary stationing. The sample line group which the material volume tables are (supposedly) based on are on alignment L1000 and they run from station 1133+73 to station 1154+00 every 10 meters. The material volume tables show volumes broken down by stations starting at station 3719+58.66 and runs through to station 3786+08.92. It is sampling at a seemingly arbitrary frequency, there is absolutely no alignment in my drawing that has stations remotely resembling those numbers, and there is definitely no sample line group it could be using that samples an alignment or stationing anything like that shown in the materials volume tables. Here is a quick screenshot of what my material volumes tables look like:[URL]
Windows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?
View 8 Replies View RelatedI just had to reinstall AutoCAD this week for being a very bad boy. Now, when I switch between open files, my screen goes blank. It takes a regen to get all my stuff to appear again.
It even goes blank in my viewport... I have to go into the viewport and regen separately from the main drawing.
i have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.
see the attached image. you can notice from the image that there is no a signle data..
Our survey crew would like to upload a dxf file into their data collector in order to stake out linework such as curb & gutter with elevation. They have given up on using stakeout points as a standard procedure long before I arrived (being the cad guy I just figured everyone used points for stakeout) and up to now they would just use the 2-d linework and manually calc elev on their own. From what I understand our RLS didn't "trust" the data collector to use elevation for staking. Now that we finally talked our RLS into "trusting" the data collector as far as using elevation for staking we are running into problems with our feature lines when exporting to a dxf file. As you may or may not know when exporting to a dxf file it explodes our feature lines into lines, p-line, and arcs. Feature lines that have different elev & no curves turn into regular line segments and they still have the correct elev on each end vertex. Great. Feature lines that had the same elev for all vertex turn into a polyline with no elev or a whacked out elev. Featurelines that had a radius turn into polylines and/or arcs (I don't know what it's using to determine this) but either way the elev is zero or whacked out once again. No good!
So, using a dxf file in their data collector to stakeout linework with elevation? If, so what is your procedure?
Furthermore I find it absolutely ridiculous that... oh never mind, it does no good to complain about the complete lack of transparency between C3D, surveyors, and surveying equipment.I have tested the dxf file with both C3D 2011 & 2012. I have not tried it with 2013, maybe that has changed? Our survey crew is using a Tsc2 data collector.
We are using Civil 3D 2010, Version 4.1 and it is being used on both WinXP and Win7.
This is an issue that has been coming up at different times with profile views and them shifting when viewed from our viewports in our layout tab. It looks correct in the model space. But it shifts to the right 10' in the layout tab. We have 7 tabs in this drawing. I have looked through all of the profile view settings and it does not seem like any of these are the issue. I created a new viewport in the same tab and received the same shift to the right. I then created a new tab in the same drawing (not copied from the one that has the issue), created a new viewport, and the shift is not there. The PSLTSCALE, MSLTSCALE, and LTSCALE are all set to 1 in all of th tabs.
Woudl there be a layout tab setting that is causing this? This is happening on all of our machines with this drawing so I know it is not a specific user/machine issue. I have attached a .pdf showing the three cases described above if that were to provide any additional insight.
Dim style is set to scale dims to match vp but when I layout a dimension it is not correct. I ran the "dimreassociate" command and that fixes it but only on the dim that I fix/selected. What am I missing? This is an existing legacy drawing so there must be some setting that has been changed.
View 4 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.
Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.
I've attached a screen of the beginning of the alignment.
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
View 2 Replies View RelatedI have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?