Dim style is set to scale dims to match vp but when I layout a dimension it is not correct. I ran the "dimreassociate" command and that fixes it but only on the dim that I fix/selected. What am I missing? This is an existing legacy drawing so there must be some setting that has been changed.
View 4 RepliesI'm pretty new to AutoCAD, I've been self-teaching myself for about a month so that I can do some floor plan drawings for a company I work for.I've been drawing in 1:1 scale in model space, but when I plot/print to check my work, I print on A4 paper.
My question is, on A4 paper my 1 drawing unit : 1 mm scale plots perfectly. But obviously if I were to compare that scale to real life, it would not be 1:1. How do I figure out the scaling on the viewport to compare to real life?
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies View RelatedI have about 10 instrumentation enlarged plans that are drawing in model space and all the equipment text and instrument bubbles and blocks are in paper space.
All of the drawings are at 1/4" but they are getting loaded down with too much info, so we are cutting each of them into twenty drawings instead of ten. While I can change the view port very easily and scale it up accordingly, after I do that I will have to re arrange the text and blocks. I'm looking for a way to scale the blocks and text in a way to where it will change the location of the text and blocks, without actually changing the size. So I bring the drawings up from 1/4" = 1'-0" to 1/2" = 1'-0". If I scale all of the blocks up by 2, it will put them in the right location, but all of the text and blocks will be too large. I could select them all and change their scale down in the property palette, but I would still have to trim down all of the leader lines going from the instruments to their bubbles.
Long story short, is there a way to scale a block or text from a basepoint to where if you scale it, it will change it's location, but not the scale of the block or text?
Looking for a tutorial or some input on how to get my civil engineering (water design) drawings to plot at a 1" = 40' scale (or some other variable of the 1" = xx feet setup). Running AutoCAD Map 3D 2011...and the .DWT files we have in our library USED to show a scale list that included all these engineering scale settings. Where can i learn about the variables/settings/unit settings/scale lists i need to have in my templates to be able to plot at these scales?
View 1 Replies View RelatedI've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies View RelatedI'm searching a perfect source that can work for a scaling System which is best and recommended to match canvas size.
View 1 Replies View RelatedI'm doing dimensions on Layout and I'm facing a problem: Using the same configurations of dimensions, sometimes I get the right dimension, but sometimes, without changing any configurations, I get wrong dimensions.
At the same drawing, with the same configurations, I get different dimensions to the same line. The only way that I'm being able to correct it is by using Match Properties (from a correct dimension to the one that went wrong).
How to create a consistent annotation scaling of text and dimensions in a layout drawing in paperspace?
How to update dimensions/annotations scaling in modelspace to create consistant scaling of annotations for an entire drawing that has annotations that have different/inconsistent scaling (arrow size text heights all differ slightly)?
I have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
I created view frames and sheets for a number of alignments. Is there a way to turn off a match line not associated with the main alignment for a particular viewport.
Or did I missed a setting somewhere that should turn this off automatically?
Have one problem with dimensions. I can see them on my model, but I cannot see them on the plot!
Dimensions layer is OK (it is not "no plot" layer, "VP Freeze" is off), especially that this layer contains some other elements that are visible.
I have a serious problem with AutoCAD placing improperly scaled dimensions within viewports. I have a drawing where half of the dimensions are correctly scaled and the other half are off by as much as 4 times their value. This occurs randomly without any rhyme or reason- and sometimes occurs whenever a drawing is opened. I know of a couple of drawings that if I simply open them, a dozen dimensions will scale up to 12x their intended value. It has happened to everyone on my staff. We are using LT 2011- but I have had a similar problem using 2004 & 2007 full seats.
View 4 Replies View RelatedFor some reason, I have 1 drawing that will let me select and modify some dimensions in a Paperspace viewport, but others are nonselectable. I can go to the Model Tab and select any dimensions I want.
If I select the dimension in Model Tab, I can go back to Paperspace Viewport and select that dimension, but now dimensions that were selectable before are nonselectable. unsure:
I am thinking it may be graphics card issue or some sort of limit.
Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
I have a set of drum scans of medium format film images. The pixel dimensions of the scans vary slightly. But they all consist of images of the same frame size, with borders around the image (scanned film outside the image.) All of the scans were done at 4000 pixels per inch, at 100 percent.
For example, the pixels dimensions of one scan is 10492 x 6907, another is 10390 x 6968, and another is 10483 x 6976.
I want to crop all of them to 10200 x 6738 pixels. I want to delete the cropped pixels, and I do not want any scaling to take place. I want to preserve the original metadata (the scanner model, pixels per inch, etc.); in other words, I want to modify the files (or copies of the files), not create new files. The print size does not matter.I've tried several approaches, and none of them let me do what I want:
1.) Manually cropping each scan individually does not give me the control that I need for cropping to precise pixel dimensions.
2.) Creating a Crop Preset with the desired pixel dimensions doesn't work because using it results in scaling (I think.)
3.) Using Canvas Size doesn't work because the borders in the scans are not equal on all four sides. I need to be able to move and position the image inside the crop area.
4.) Using New, and Place… allows me to create a Canvas Size with the desired pixel dimensions and resolution, and move the placed images; they will fit without scaling. However, this results in a new file being created, and therefore the metadata is lost.
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies View RelatedWhat i have is a low polymodel that's quite small in scale, i'm modelling around a higher poly model, when i zoom in, the viewport clipping kicks in and parts of the model disappear, so i cant work on the small details. What i need to do is scale up both my low poly and high poly, work on the small details and scale it back down.
In maya there are multiple solutions to this; The first and most obvious would be to increase the near clip in the camera attributes.
The second would be to freeze transformations on the low and high poly, scale up the model, work on it and then scale it back to the value of 1.
The third would be to put both the low and high poly models into a group, scale up the group, work on the model, return the group back to its default size and ungrouping. Personally i would use this method to preserve the original scale values on the low and high poly models.
Is there a way of doing any of the above in 3ds max?
Dimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
I have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
MA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I currently use Mep 2012 although my question I believe is general in nature. As a sheet metal contractor I do drawings that have many different entities at various elevations. Many times I use change propeties to match the propeties of on entity like a linetype to change another. What I really need to do is have the ability to use a similiar button and match or change the "Z" elevation of a specific entity just like I do for linetype, color etc.
View 2 Replies View RelatedNew Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedHow do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedProblem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedI typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.