AutoCad 2D :: Scaling A Viewport
Jul 11, 2012
I'm pretty new to AutoCAD, I've been self-teaching myself for about a month so that I can do some floor plan drawings for a company I work for.I've been drawing in 1:1 scale in model space, but when I plot/print to check my work, I print on A4 paper.
My question is, on A4 paper my 1 drawing unit : 1 mm scale plots perfectly. But obviously if I were to compare that scale to real life, it would not be 1:1. How do I figure out the scaling on the viewport to compare to real life?
View 9 Replies
ADVERTISEMENT
Nov 9, 2011
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
View 4 Replies
View Related
Sep 24, 2013
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies
View Related
Jun 23, 2011
Dim style is set to scale dims to match vp but when I layout a dimension it is not correct. I ran the "dimreassociate" command and that fixes it but only on the dim that I fix/selected. What am I missing? This is an existing legacy drawing so there must be some setting that has been changed.
View 4 Replies
View Related
Apr 23, 2012
I have about 10 instrumentation enlarged plans that are drawing in model space and all the equipment text and instrument bubbles and blocks are in paper space.
All of the drawings are at 1/4" but they are getting loaded down with too much info, so we are cutting each of them into twenty drawings instead of ten. While I can change the view port very easily and scale it up accordingly, after I do that I will have to re arrange the text and blocks. I'm looking for a way to scale the blocks and text in a way to where it will change the location of the text and blocks, without actually changing the size. So I bring the drawings up from 1/4" = 1'-0" to 1/2" = 1'-0". If I scale all of the blocks up by 2, it will put them in the right location, but all of the text and blocks will be too large. I could select them all and change their scale down in the property palette, but I would still have to trim down all of the leader lines going from the instruments to their bubbles.
Long story short, is there a way to scale a block or text from a basepoint to where if you scale it, it will change it's location, but not the scale of the block or text?
View 7 Replies
View Related
Oct 19, 2011
Looking for a tutorial or some input on how to get my civil engineering (water design) drawings to plot at a 1" = 40' scale (or some other variable of the 1" = xx feet setup). Running AutoCAD Map 3D 2011...and the .DWT files we have in our library USED to show a scale list that included all these engineering scale settings. Where can i learn about the variables/settings/unit settings/scale lists i need to have in my templates to be able to plot at these scales?
View 1 Replies
View Related
Jan 19, 2013
I have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
View 8 Replies
View Related
Apr 3, 2011
What i have is a low polymodel that's quite small in scale, i'm modelling around a higher poly model, when i zoom in, the viewport clipping kicks in and parts of the model disappear, so i cant work on the small details. What i need to do is scale up both my low poly and high poly, work on the small details and scale it back down.
In maya there are multiple solutions to this; The first and most obvious would be to increase the near clip in the camera attributes.
The second would be to freeze transformations on the low and high poly, scale up the model, work on it and then scale it back to the value of 1.
The third would be to put both the low and high poly models into a group, scale up the group, work on the model, return the group back to its default size and ungrouping. Personally i would use this method to preserve the original scale values on the low and high poly models.
Is there a way of doing any of the above in 3ds max?
View 2 Replies
View Related
Feb 21, 2011
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
View 6 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Mar 9, 2012
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies
View Related
Jan 23, 2013
Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
View 1 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Jul 20, 2011
I am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies
View Related
Jul 1, 2011
I did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
View 2 Replies
View Related
Jan 31, 2012
how do you create a viewport within an existing viewport ?
View 9 Replies
View Related
Aug 19, 2006
We are designing some web graphics for a friend. By "we" I mean me and a guy who lives on the opposite coast.
He did the initial page layout/design as a PhotoShop tif, at 300 dpi, in layers and about 5 inches wide. The idea, on his end, was that it would be a small file size and, therefore, faster to download on my end. With me so far?
Anyway, I'm suppose to convert it to 800 ppi wide, 72 dpi, jpg. Sounds easy enough. Or not Do all the scaling and now the graphics don't look right. None of the layer effects are right!
How do I scale his graphic, for my purposes and, once it's the size I need it, have everything look the way he created it?
Example: Text at that 5 inch wide, 300 dpi size with a one point stroke on it looked find when the graphic was 5 inch wide and 300 dpi, but at 800 ppi wide and 72 dpi, it's all wrong
Is there a preference or something I should be clicking somewhere and I'm just missing it?
View 3 Replies
View Related
Dec 6, 2011
I have converted a PDF to DWG and the scale is out, what's the best way to scale it back to its original size?
Scale by Reference? This option works ok but no measurement seems to be spot on apart from the item you used for the scale reference.
I used the program 'Any PDF to DWG Converter' and the drawing scale in the title block is 1:50.
View 9 Replies
View Related
Feb 4, 2012
I'm having problems on setting my scaling up in dwg1 that was sent to me. dwg1 did not have any viewports set up. dwg2 has a scale of 1''=20' I need to set up dwg1 to 1 to 1 first, this is my master drawing,
View 2 Replies
View Related
May 20, 2013
I have a 2D drawing that is drawn if full scale, it is 26feet wide approximate and 20 feet tall. I need to scale down to fit on a 4 X 8 for a mockup, i have tried using the scale command, but to no avail.
View 9 Replies
View Related
Oct 26, 2012
How do I scale a 3D model that I have imported originally from a ".step" file (or really any 3D model). I have come from SolidWorks, and this was very easy to do. All of the help files indicate that I need access to the original sketch.
View 1 Replies
View Related
Oct 28, 2013
I need to know how to set up my dwg so that 1cm = 1in. when I'm drawing.
View 6 Replies
View Related
Dec 13, 2012
Lets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?
Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.
View 3 Replies
View Related
Apr 2, 2012
I am working on a drawing that started life as a dxf file from a client. I am having problems with the scale of hatching in that whilst I might normally do a line hatch at a scale of 25 to get the same spacing I now have to set the scale to 650.
Initially I had a problem that the scaling in viewports was also wrong but I sorted that one out but I cannot find how to reset the hatch scale to my normal setting.
I am also finding that when hatching it seems to find gaps in lines that it would not normally do. Even after I have filleted all the corners the hatch still in some cases 'spills out'. The measuring and dimensioning tools are all working correctly and show the correct figures.
View 5 Replies
View Related
Oct 30, 2013
I'm trying to scale down 3D drawings but when I use the 3DSCALE command the perspective gets distorted. Is there a way I can scale my drawing without messing up the perspective?
View 7 Replies
View Related
Oct 25, 2013
We receive site survey dwgs generated in Civil 3D that contain 3D topos with elevation tags. The elevation tags are clearly scalabe anno objects that scale correctly in the received civil dwg. The elevation tags won't scale correctly in our dwgs - they come in too small to see.
- Both dwg's have units set to decimal.
- I tried copying / pasting the viewport from the civil dwg to our dwg and the text is still too small. This tells me it's a dwg specific variable and not a viewport setting.
- I have Civil 3D object enabler installed, though I don't think this has any bearing.
It would be nice to use the original tags and not have to re-create every elevation tag.
View 3 Replies
View Related
Mar 13, 2013
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
View 1 Replies
View Related
Oct 10, 2011
I am trying to print on a 3d printer and seem to have a bit of a scaling issue with inventor 2012. I saved the .stl file in the same units but still get a scaling issue. Under options when I save it shows a 1:1 scale as well as the correct units.
When printing a .stl file from another computer that has inventor 10 installed we do not have this issue. Seems to be something with the files from 2012.
View 7 Replies
View Related
Jan 21, 2013
This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.
View 2 Replies
View Related
Jun 4, 2013
How can i scale a block have some attributes , with known factor ?
View 3 Replies
View Related
