Lets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?
Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I need to know how to set up my dwg so that 1cm = 1in. when I'm drawing.
View 6 Replies View RelatedI'm trying to scale down 3D drawings but when I use the 3DSCALE command the perspective gets distorted. Is there a way I can scale my drawing without messing up the perspective?
View 7 Replies View RelatedWe receive site survey dwgs generated in Civil 3D that contain 3D topos with elevation tags. The elevation tags are clearly scalabe anno objects that scale correctly in the received civil dwg. The elevation tags won't scale correctly in our dwgs - they come in too small to see.
- Both dwg's have units set to decimal.
- I tried copying / pasting the viewport from the civil dwg to our dwg and the text is still too small. This tells me it's a dwg specific variable and not a viewport setting.
- I have Civil 3D object enabler installed, though I don't think this has any bearing.
It would be nice to use the original tags and not have to re-create every elevation tag.
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
Is there a way to set the Multileader scale for DIMSCALE when it is on the tool palette like you are able to do with every other block? Maybe a lisp routine so set the Multileader style and to dimscale?
View 4 Replies View RelatedI still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
I'm currently trying to make an MV block which is a combination of a 2D symbol and its 3D representation. I want the 2D symbol to scale in line with the annotation scale so have set the annotative flag on my symbol block but I do not want the 3D representation to scale so this does not have the flag set. However, when I put the two blocks into my MV block and then alter the annotation scale, both the 2D and 3D blocks both scale.
Is there something more that I need to be doing to to make the two blocks act independently and comply with the annotative flag set on them? I have seen this behaviour work on MEP2013 but can't see anything different on its 'devices' and my simple blocks.
When I import a drawing using XREF command from one file to the new file the scaling between model space becomes all messed up. making the adjustments between the two?
View 7 Replies View Relatedhow you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies View RelatedI'm rendering an equipment shelter that sits atop a gravel pad. I've picked the "Gravel Crushed" material, and it looks OK, but I'd like to be able to scale the material so it isn't so "fine". I'd like it to be more coarse.
How to change the scale of the material?
I have just upgraded from AutoCAD 2008 to 2013 so I'm unfamiliar with the latest set up & dont' have time to explore it properly yet. I see that 2013 has a different projection method for paper space views but for the present I am still using solview & soldraw which I am familiar with to get my work done on time.
In 2008 the 'Linetype manager' page let you tick a box 'Use paper space units for scaling' so that different paper space view ports would automatically scale line types to suit the viewport scale. To draw details of parts of a view I would normally copy the basic solview view port, alter its property to a layer named VPORT, scale this viewport to the desired scale to show what I want to detail & the linetypes would automatically scale so that they appear the same as in the original solview view port.
This pick box is not in the linetype manager page in 2013, how can I achieve this?
I have MSLTSCALE >0, LTSCALE>0.5 & PSLTSCALE >1
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedHow do I accurately set the scale on a raster underlay based on 2 (or more) points where I know the distance between them?
In fact I would like to do this on 2 axes separately so that it stretches.
I am used to georeferenceing like this and getting raster underlays the right shape for the coordinate system I am using. How I can do this in AutoCAD, which used a very simple coordinate system.
My plan designer uses Chief Architect and has converted his drawing into a DWG for me to use in AutoCAD 2013. When I open the drawing however, it is not to scale. I've tried importing it using the copyclip command to a blank drawing but it doesn't convert to scale. When I've tried using the scale command it doesn't scale properly.
View 9 Replies View Related I've been using MAX for about 2 months and I've been trying to re-target animation from and older rig to newer versions. However, the newer models/ rigs have significant difference in their scale factor. Is there anyway to circumvent this?
ps. I've attach a pic of 2 CAT rigs, bigger one being the source and smaller one is the target.
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
I want to be able to plot a drawing as a PDF (to send to customers, vendors, etc.) and not have the PDF able to be converted back to a DWG (as so many programs out there are able to do).
View 3 Replies View RelatedHaving an issue where the .ctb works in some paper space tabs and not in others. When we do the plot preview on one tab the line weight is correctly shown, and when we go to a different tab, the preview displays colors and no line weight. We tried this on two separate machines both running the same operating system, AutoCad 2013 and using the same .ctb.. We tried creating a new copy of the ctb. There must be a setting that is different in the viewports, but I can not figure out what it is.
View 6 Replies View RelatedI only revised the text on my drawing and wanted to reprint my layout, but the 3D view disappears when I change the "view type" and will not plot. After hitting "regen" command several times, the 3D view types finally appear but are not even accurate - "Shades of Gray" is showing as "Sketchy", etc.
View 1 Replies View RelatedI just switched over to 2013. I am trying to make a 2d drawing from a 3d model. In past releases I always would plot to DXB and select hidden plot style. In this 2013 I select hidden but it does not hide anything. Is there a new way to acheive this in 2013.
View 2 Replies View RelatedI have a drawing that refuses to plot the raster image when i plot to a PDF. It will plot the raster when I send it to the plotter. The raster is visible in the print preview. I've tried using the Adobe PDF driver and the DWG to PDF.pc3.
All I get is the line work.
Plot tranparency is off. Image is at Brightness 50, Contrast 50, Fade 0.
Autocad Map3d 2013
I have just started using 2013, and everything works just fine, with the exception of trying to plot. I am able to plot to PDF, but if I try to send a job to any of my network printers/plotters, AutoCAD crashes.
I am on a Dell Optiplex 990, Windows 7 Pro, 32bit, Intel Core i7 proc, 8GB RAM
I use .STB Plot Style more often (as our Standard Format) which is easy to use for me, and once in a while use .CTB plot style. Since .CTB are more often use by others, and would like to develop a new standard layering format.advantages and disadvantages or differentiate of this two plot style in its actual application.
View 3 Replies View RelatedNot sure if I am supposed to specify the PDF printer in the Page Setup or the upper left of the batch plot dialog box.
Also, why is it that every time I open batch plot it loads all the current layout tabs in the drawing (which I dont care about). How do i open batch plot and specify my sheet list and not have to "replace all sheets"/
I was wondering if there is a plot stamp option in inventor, like there is in autocad?
View 3 Replies View RelatedThe first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines
The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light. The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights.
I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013.
We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.
when i open dwg file. message shown , plot stamp detected.and when i give plot drawing print with message " PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"
I dont want this message on ploting drawing.