AutoCAD Inventor :: Plot Stamp For 2013?

Oct 7, 2013

I was wondering if there is a plot stamp option in inventor, like there is in autocad?

View 3 Replies


ADVERTISEMENT

AutoCAD 2013 :: Plot Stamp Detected

Apr 6, 2013

when i open dwg file. message shown , plot stamp detected.and when i give plot drawing print with message " PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"

I dont want this message on ploting drawing.

View 2 Replies View Related

AutoCAD 2013 :: Getting Data Link Files Error When Clicking On Plot Stamp Settings

Oct 8, 2013

I recently switched to a new machine and manually copied and pasted my custom settings over and set paths to the new location.  Everything seems to work fine except when I click on "Plot Stamp Settings".I receive an error that says "Data Link Files"  and sometimes it says "LISP".

View 1 Replies View Related

AutoCAD Inventor :: Plot Stamp Without Dirtying The Drawing?

May 10, 2013

Is it possible to create a plotstamp on the border of the page without dirtying the drawing?  Most solutions I've seen on the forums involve an iProperty that is updated when saved, but this would dirty the drawing, so it isn't an option.  Also, we need our plot stamp to appear outside the titleblock.  My users keep saying "make it work like AutoCAD".

Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1

View 5 Replies View Related

AutoCAD Inventor :: Plot Stamp Time / Date And File Location?

Jul 15, 2013

how to add the plot stamp time/date and file location when printing  in autodesk inventor the same as in Autodesk.

View 2 Replies View Related

AutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer

Aug 29, 2011

When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.

Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc

Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional

Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports.  It has at least one entity per layout

Is there anyway to rectify this and still use the built-in Plot Stamp?

View 2 Replies View Related

AutoCad :: Adding Plot Stamp To Drawing

Jul 14, 2011

I'm having trouble adding a plot stamp to my drawing in AutoCAD 2002. My drawing is in meters and the page in paper space is 0.841m wide by 0.594m high. I can not figure out the setting for the plot stamp to put it in the bottom left corner. This is my first time trying to use a plot stamp so things will need to be explained most likely.

View 4 Replies View Related

AutoCAD 2010 :: Getting Rid Of Product Plot Stamp

Jan 2, 2011

When I try to open or create drawings in autocad (which i downloaded recently from the edu community) it gives me a warning which says "the drawing file being opened was  not created by a product from an autodesk education suite. if you save this drawing it will always be plotted with the follow plot stamp: produced by an autodesk education program.it is recommended that you save this drawing with a different file name." but I have saved and resaved drawings, tried different extensions and still it won't plot or print without this plot stamp. What is most likely causing it and what can I do to remove it.

View 7 Replies View Related

AutoCad :: Plot Stamp To Work On PDF File

Mar 8, 2013

Is there a way to get Plot Stamp to work on a PDF file?

View 9 Replies View Related

AutoCAD Architecture :: Cannot Append To Plot Stamp Log File

Dec 10, 2011

I am trying to plot to PDF and it wont do it.

View 1 Replies View Related

AutoCad :: Batch Plot 50 Drawings - Publish With Block Stamp?

Jun 20, 2012

I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Changing Default Plot Stamp

Mar 20, 2013

Right now I have a few lines in the ACADDOC.lsp file to set up the plot stamp for all users. I would like to just turn on the plot stamp and auto load a custom .pss file that I have set up.

View 1 Replies View Related

AutoCAD Architecture :: Canceled - Educational Plot Stamp In Source Drawing

May 9, 2011

I'm having some problems with ACA 2012 when trying to work with wall styles.

I'm currently on the final year of my IArchitecture degree, up until this point I've used AutoCAD through the AD Student Community , but I've just picked up a book on ACA and was planning to get to grips with it. However, I ran into issues within the first few pages!

When trying to apply wall styles to existing walls in my drawing,  I get the following message:

** Canceled - Educational Plot Stamp in source drawing. **

And no wall style is applied. I can edit properties of walls in terms of height and width etc, but can't apply any styles.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Plot Stamp Shows Temp Folder When Publishing?

Jan 2, 2014

We used a block which contains deisel expressions for our plot stamp. When we publish through the sheet set manager it shows a temp folder where the drawings are spooled to instead of the actual drawing saved path. We can fix this buy turning off background plotting when we publish, but I was wondering if there is a way to show the saved path instead of the spoolled path when publishing in the background.

Below is the expression found in our plot stamp block.
 
$(GETVAR, "dwgprefix")$(getvar, "dwgname")$(edtime, 0, M/DD/YYYY H:MM:SS AM/PM), $(getvar, loginname)

Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM

View 4 Replies View Related

AutoCAD 2013 :: Get Batch Plot To Plot PDFs To Single File

Sep 30, 2013

I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!

i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now. 

View 1 Replies View Related

AutoCAD 2013 :: Publish Stamp Changing Automatically?

Nov 1, 2012

Just as of a week ago, it was brought to my attention that my publish stamp has changed to "C:usersjoshuaappdatalocal empacpublish_3412Gi1.dwg" (for example) even thou the location on the drawing I am working on is located on a server, which is normally H:/...../.../...../   Could this be from a adobe pdf driver? I dont know what changed this,

View 1 Replies View Related

AutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot

May 21, 2013

I have one drawing per file at model tab. When I need to plot a multiple page file, I use:

Print > Batch Plot.

The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.

Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.

View 1 Replies View Related

AutoCAD Inventor :: Multiple Use Of IMates / In A Stamp

Dec 19, 2013

We have a frequently used bearing assembly for dampers, mounted to plate consisting of a shaft hole w/ 2 countersunk holes for flat head cap screws to mount the bearing.

I have a stamp for the hole array into the plate, and can individually i Mate each FHCS into said holes after placing in the assembly onto the plate.

Is there a way to set up the iMates so that the bearing assembly would plop in automatically into the two separate countersunk holes? Not sure if you would have to create iMates in the stamp...or if thats even possible.

Sometimes the damper may have 2 bearing assemblies @ opposite side of the frame for one blade shaft, sometimes we may have as many as 4-5 blade shafts (10 bearing assy's). So Im imagining dragging the thing to each iMated array and dropping it in.

Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro

View 2 Replies View Related

AutoCAD Inventor :: Drawings Stamp With Date?

Apr 15, 2012

Currently in autocad we start the print/plot command and then the command line shows options for the drawing stamp. There are several options including for approval, approved for construction, test only and others. When the appropriate number associated with the correct drawing stamp it lets you pick an insertion point and inserts the drawing stamp with a current date under the stamp to show when the drawing was plotted. After the drawing stamp is inserted it returns to the print/plot dialog.

If any IV users have a similar drawing stamp with date that is put on their drawings, I would like to hear how it was accomplished.

I have played with a sketched symbol and with ilogic can insert the symbol and start the print/plot command but I do not know how to make the stamp selection in ilogic automatic with a parameter or iproperty.

If ilogic is the way to go with this or any other options to accomplish the drawing stamp insertions with current date.

View 9 Replies View Related

AutoCAD 2013 :: Plot A Drawing As PDF?

Oct 24, 2013

I want to be able to plot a drawing as a PDF (to send to customers, vendors, etc.) and not have the PDF able to be converted back to a DWG (as so many programs out there are able to do).

View 3 Replies View Related

AutoCAD 2013 :: CTB Plot File

May 17, 2013

Having an issue where the .ctb works in some paper space tabs and not in others. When we do the plot preview on one tab the line weight is correctly shown, and when we go to a different tab, the preview displays colors and no line weight. We tried this on two separate machines both running the same operating system, AutoCad 2013 and using the same .ctb.. We tried creating a new copy of the ctb. There must be a setting that is different in the viewports, but I can not figure out what it is.

View 6 Replies View Related

AutoCAD 2013 :: 3D View Will Not Plot

Feb 13, 2013

I only revised the text on my drawing and wanted to reprint my layout, but the 3D view disappears when I change the "view type" and will not plot. After hitting "regen" command several times, the 3D view types finally appear but are not even accurate - "Shades of Gray" is showing as "Sketchy", etc.

View 1 Replies View Related

AutoCAD 2013 :: Hidden DXB Plot

Apr 20, 2012

I just switched over to 2013. I am trying to make a 2d drawing from a 3d model. In past releases I always would plot to DXB and select hidden plot style. In this 2013 I select hidden but it does not hide anything. Is there a new way to acheive this in 2013.

View 2 Replies View Related

AutoCAD 2013 :: Plot Scaling

Dec 13, 2012

Lets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?

Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.

View 3 Replies View Related

AutoCAD 2013 :: Raster Won't Plot To PDF

Oct 25, 2012

I have a drawing that refuses to plot the raster image when i plot to a PDF. It will plot the raster when I send it to the plotter. The raster is visible in the print preview. I've tried using the Adobe PDF driver and the DWG to PDF.pc3. 

All I get is the line work. 

Plot tranparency is off. Image is at Brightness 50, Contrast 50, Fade 0. 

Autocad Map3d 2013

View 5 Replies View Related

AutoCAD 2013 :: Crashing When Try To Plot

Jun 6, 2012

I have just started using 2013, and everything works just fine, with the exception of trying to plot.  I am able to plot to PDF, but if I try to send a job to any of my network printers/plotters, AutoCAD crashes.

I am on a Dell Optiplex 990, Windows 7 Pro, 32bit, Intel Core i7 proc, 8GB RAM

View 9 Replies View Related

AutoCAD 2013 :: STB And CTB Plot Differentiate

Nov 5, 2012

I use .STB Plot Style more often (as our Standard Format) which is easy to use for me, and once in a while use .CTB plot style. Since .CTB are more often use by others, and would like to develop a new standard layering format.advantages and disadvantages or differentiate of this two plot style in its actual application.

View 3 Replies View Related

AutoCAD 2013 :: Batch Plot To PDF?

Aug 28, 2013

Not sure if I am supposed to specify the PDF printer in the Page Setup or the upper left of the batch plot dialog box.

Also, why is it that every time I open batch plot it loads all the current layout tabs in the drawing (which I dont care about).  How do i open batch plot and specify my sheet list and not have to "replace all sheets"/

View 9 Replies View Related

AutoCAD LT :: 2013 Plot Styles Not Working

Oct 3, 2012

The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines

The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light.  The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights. 

I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013. 

We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.

View 7 Replies View Related

AutoCAD 2013 :: Plot Styles For Different Scales?

Sep 10, 2013

I've been using Autocad for over 20 years.  Any office I've ever worked in never used custom plot styles.

Can custom plot styles control lineweights of objects at different scales?  For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine.  Now I want to print that floor plan at 1/8" but many lines now look darker than before.  Can I create a plotstyle for the 1/8" scale to control the lineweights?

View 9 Replies View Related

AutoCAD 2013 :: Getting PDF / TIFF To Plot Greyed Out?

Feb 6, 2013

I am new to 2013 and having issues when I print files that have pdf underlays that are set with a border of color 8 but still print dark on the sheet.  I have the same issue with TIFF files that want to show the white background and everything dark.  Is there an easy fix to plot it greyed out so you can see what you are proposing over what is existing?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved