AutoCAD Inventor :: Multiple Use Of IMates / In A Stamp
Dec 19, 2013
We have a frequently used bearing assembly for dampers, mounted to plate consisting of a shaft hole w/ 2 countersunk holes for flat head cap screws to mount the bearing.
I have a stamp for the hole array into the plate, and can individually i Mate each FHCS into said holes after placing in the assembly onto the plate.
Is there a way to set up the iMates so that the bearing assembly would plop in automatically into the two separate countersunk holes? Not sure if you would have to create iMates in the stamp...or if thats even possible.
Sometimes the damper may have 2 bearing assemblies @ opposite side of the frame for one blade shaft, sometimes we may have as many as 4-5 blade shafts (10 bearing assy's). So Im imagining dragging the thing to each iMated array and dropping it in.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 2 Replies
ADVERTISEMENT
Mar 7, 2013
For some reason, I am unable to use the iMate feature of Autodesk Inventor. I am unable to select iMates on existing parts to assemble them with other parts. I have followed all the instructions for using iMate features, but I always run into trouble because, even though I did indeed enable iMate glyph visibility, and I did do all the other stuff they said, when I click on the iMate glyph, nothing happens. It is as if they weren't even there at all. Selecting the iMates from the project browser on the left doesn't work either; while I am able to select the features, I am unable to move the parts or select any other iMates, except as a group selection, which doesn't let me do anything, either.
View 1 Replies
View Related
Jun 29, 2010
Is there an option to add an i mate within a sketch block. I am working on a belt conveyor for handling coal and have created a master sketch to drive all components for along the conveyor.
As the ground modules are all the same module, i have a sketch block. Problem is i cannot add an i mate to the idlers within the sketch block. It means i can only create to i mates individually after the sketch block is copied or patterned.
View 5 Replies
View Related
Sep 7, 2012
I'm working in Inventor 2012 and new to VBA and I'm gonna kick myself if there's a really easy answer to this. I've got 120+ WorkPoints on corresponding WorkAxes on an irregular pattern both horizontally and vertically. I'd like to Select all the WorkPoints and add a mate Imate then all the work axis and add an insert imate to ease placement of a part at each location within an assembly (this scenario crops up quite often).
I've been trying to use AddMateiMateDefinition but it doesn't seem to let me pass a WorkPoint to it, is it possible?
View 2 Replies
View Related
May 27, 2010
Is there a way to make a part being placed into an assembly instantly adapt using imates?
For instance:New assembly... Place box 1...Place box 2, but have it automatically placed inside of box 1 and sized to fit inside with 1" clearance all around.
View 1 Replies
View Related
Sep 14, 2012
I currently have to palce a lot of parts from the content center into an assembly and miss essential imates for easy placement. I am using IV2010 at the moment and have no clue where to start.
I have tried copying a new instance of a part into a new library. I then placed this component in the assembly hoping I could add iMates to it in the assembly environment. But when I want to save I get the message that the part has not been checked out for me to use even though I have read/write access to the library.
So a couple of questions here:
As files in the CC are saved in a datapase and not as part files, can imates be included in that database? Do I really need to recreate the part from scratch, and then publish it to the library?
How would it be possible to open up a CC file like in the part edit mode in an assembly?
View 1 Replies
View Related
Apr 6, 2004
How does IV recognize iMate naming. I am trying to use specific named iMates on parts that when placed in the assembly that they can be placed in the correct postions. What I have run into is that no matter how I name the iMates I can place a part with one iMate name on a non-matching named iMate. Ex.- 1601-1 will mate with 2201-1 using the alt-Drag method. (These two iMates are both insert types.) This happens sometimes using the "Use iMate" checkbox on the place component dialog. I thought that the naming and type of iMate dictated what mates with what not just type.
View 5 Replies
View Related
Jun 17, 2013
Is there a secret to having the Design View Reps stay on the right settings when using Occurrences.AddUsingIMates? I've got a master top level assembly that I'm bringing other iLogic modules into by using an iLogic form in the master top level assembly. The form calls a rule that makes a copy of the module assembly in the same file location as the master TLA. It then adds the module TLA to the master TLA using iMates, and calls an external rule to copy all the sub files from the module into that file location and replace them in the module TLA. The user then calls the module's configuration form using a button on the master TLA's form.
I've been using a line of code to set the DVR back to default and associative for the module, but now that has stopped working and it immediately goes back to Master after running the rule, or even if I try and set it by hand. But if I bring the same module in and place it using the Place button, it comes in correctly. I've even added a NameValueMap for the DVR optional argument on AddUsingiMates and that hasn't work.
View 2 Replies
View Related
Dec 21, 2011
Create code that will allow me to place a part in an assembly at all matching iMate locations. I would also like to call this function from iLogic using RunMacro if possible.
View 1 Replies
View Related
Nov 4, 2011
I'm having an issue with imates not showing up on members of an ipart. If I open the factory file the imates are there, but if I open the member file the imates are not there. This is causing an imate error in my assembly because when I need to switch members out (at the assembly level) the imates are not holding because they're not there!?!
I've even tried "Dirtying" the file by creating a plane and then deleting it, doing a save, then a generate files. This doesn't work either. Why won't the imates show up correctly on the members that they're supposed to show up on?
View 6 Replies
View Related
Mar 8, 2013
know if I can drive the length of a shaft based on two iMates being satisfied? We'll take a driveshaft for example. If, using iMates, I make it connect to the transmission yoke and to the axle yoke, can the Length parameter automatically be changed so it fits?
View 9 Replies
View Related
Jan 18, 2012
Recently we added i Mates to some library-parts. Also replaced some Content Center models by models with iMates. When we place these Content Center parts, the only way to activate the iMates is to right click
When creating a new iPart with iMates and publish this to Content Center everything is working well. Our server and workstations are up-to-date, so I think this is a "bug". Maybe Autodesk fixes in the next update.
View 2 Replies
View Related
Nov 15, 2013
I want to exclude imates from two parts and 1 whole part at the same time.
This is my situation:
PartA with 2 sets of imates(for constrains on 3 axis for no movement) on the right side. Set A and set B.
PartB with 2 sets of imates, one on the left side set A and one on the right side, set C.
PartC with 2 sets of imates on the left side. Set B and set C.
i want, in a iPart, part A connected with part C connection with iMate set B. And in the same ipart i want Part A, B and C connected respectively with iMate sets A,C
So in the first situation i want iMates A and C and part B to be suppressed and in the second i want iMate set B to be suppressed.
View 1 Replies
View Related
Feb 27, 2013
I've got an existing assembly in which I need to change the matchlist for the imates. I have been able to change the imate names but not the match list.
The only reference I have found creates the iMate in a part. I need to edit an existing iMate in the assembly document for the matchlist.
I have some code below, but it is not complete.
Set MyPart = ThisApplication.Documents.Open(strJobLocalDirectory & strLFVAssyName)
Set oAssyComp = ThisApplication.ActiveDocument.ComponentDefinition
'Dim oDoc As Inventor.AssemblyDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oInsertiMate As InsertiMateDefinition
[code]....
View 2 Replies
View Related
Feb 15, 2013
I was just wondering how to place a component into an assembly using ilogic? If this is possible, is there also an option to choose if iMates will be generated?
I would ideally like to place a list of components into an assembly, the list with probably exist in excel, then have iMates set to 'Automatically generate iMates on place' so that my assembly assembles automatically.
Inventor 2013 Certified Professional
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 7 Replies
View Related
Jan 10, 2012
I am trying to use iMates names to place a hydraulic adapter into an assembly. The adapter has two male ends - one end with an insert iMate matching a cylinder iMate and one end with an insert iMate matching the hose fitting. When placing the adapter, the iMate names are ignored and it is mated backwards using inferred iMates.
Also, I get an error because it wants to mate new instances of the part to the unconsumed iMate of the part that was just placed (which I guess would place parts into infinity). I have changed around the iMate names and matching names every way I can think of, but the names still are ignored, and it uses other deferred iMates.
View 5 Replies
View Related
Jan 16, 2013
I am a AutoCAD LT 2012 user. How do i publish transparent stamp in multiple sheets?
This "plot transparency" check box only appears in "PLOT" printing and not in "PUBLISH"printing.
View 7 Replies
View Related
Jun 1, 2011
I press control Clone stamp, click on the area I want
I then let go and click another area to clone
Is it possible to clone multiple times (without going back to the original area)
View 2 Replies
View Related
Oct 7, 2013
I was wondering if there is a plot stamp option in inventor, like there is in autocad?
View 3 Replies
View Related
Apr 15, 2012
Currently in autocad we start the print/plot command and then the command line shows options for the drawing stamp. There are several options including for approval, approved for construction, test only and others. When the appropriate number associated with the correct drawing stamp it lets you pick an insertion point and inserts the drawing stamp with a current date under the stamp to show when the drawing was plotted. After the drawing stamp is inserted it returns to the print/plot dialog.
If any IV users have a similar drawing stamp with date that is put on their drawings, I would like to hear how it was accomplished.
I have played with a sketched symbol and with ilogic can insert the symbol and start the print/plot command but I do not know how to make the stamp selection in ilogic automatic with a parameter or iproperty.
If ilogic is the way to go with this or any other options to accomplish the drawing stamp insertions with current date.
View 9 Replies
View Related
May 10, 2013
Is it possible to create a plotstamp on the border of the page without dirtying the drawing? Most solutions I've seen on the forums involve an iProperty that is updated when saved, but this would dirty the drawing, so it isn't an option. Also, we need our plot stamp to appear outside the titleblock. My users keep saying "make it work like AutoCAD".
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 5 Replies
View Related
Jul 15, 2013
how to add the plot stamp time/date and file location when printing in autodesk inventor the same as in Autodesk.
View 2 Replies
View Related
Jan 26, 2012
(Inv Pro 2012, XP64, Vaulted Project and Content Center)When I'm placing hardware, the Autodrop function is really convenient. Even better when the "multiple" pickbox is active, which from what I understand is when Inventor finds similar features on the same plane that the selected autodrop component could potentially mate to.
This is a huge time-saver, since I often have lots of bolted joints that all terminate on the same plane. Sometimes however, even when the parts lie in the same "plane", the plane isn't contiguous in that a feature breaks it across. No biggie, it just means I have to do two or three "multi-autodrops".
Once I put washers at the back side of the connections (which multiple works like a charm on), all of a sudden when I go to place nuts, each washer surface is now it's own plane, and multi-drop no longer recognizes all the other parts. This can be a real pain manually placing 30 or 40 nuts at a time.
I think the "Bolted Connection" option might work, but I really don't have a need to store all those subassemblies, name them, keep them vaulted properly, etc. That would be almost as much of a headache.
Also, most of the features that I'm connecting through are created as Hole features and as "nominal" oversized bolt holes as Inventor suggests when the "clearance hole" option is used for hole creation (not randomly extruded islands), but they aren't patterned as they don't follow a prescribed circular or rectangular pattern.
Am I missing something that I can do (like something stupid simple such as holding down the "alt" key or some crazy thing like that) that will allow inventor not just to suggest CONTIGUOUS planar features, but also CO-planar features so I can place all these nuts at once?
Short of creating a custom Content center part that consists of a nut / washer assembly I can't think of anything. And creating and publishing the nut washer assemblies will eat up some time too, since I have about 50 different combinations (some SAE washers with normal hex nuts, some SAE washers with ESNA hex, some USS washers with jam nuts, some USS Type B washers with all-steel locknuts, etc...)
View 2 Replies
View Related
Apr 18, 2013
I'm designing a part that in Autodesk Inventor 2013 that is constructed from several layers laminated together. I have 4 layers:
F (front)
M1 (middle, variation one)
M2 (middle, variation two)
B (back)
The final solid will lhave 17 layers laid out like this:
F | M1 | M2 | M1 | M2 | M1 | M2 ... | B
I currently have a part file containing
F | M1 | M2
What's the best way to create this solid if I want to a) keep all instances of M1 and M2 in sync, and b) make it easy to work on all 4 layers. Do I have to export F, M1, M2, and B as individual parts and import them into an assembly or can I keep them in one part file? I really like the ability to be able to work on all the solids at the same time because they're visually dependant on each other.
View 4 Replies
View Related
Mar 15, 2013
From all our parts of an assembly we made 1 IDW with multiple sheets. Now we want to convert this IDW to PDF's and in such a way that we have one PDF for each sheet, and each PDF files needs the same name as the sheet.
View 5 Replies
View Related
Mar 12, 2003
I have a bar and I want to place there several clips so that they are only moveable in one direction. Both of the parts have fitting iMates. When I place the first clip it works fine and the iMates get connected. But when I place the second the clip is draw elsewhere. Is it possible to use one half of an iMate more than once?
View 1 Replies
View Related
Oct 28, 2011
Is there any way to cause Inventor to convert a multi-sheet IDW to an Autocaf DWG file that puts each IDW sheet on it's own tab in the dwg?
IDW ---Sheet 1, Sheet 2, Sheet 3, etc
DWG - Tabs for Sheet 1, Sheet 2, Sheet 3, etc ALL IN ONE DWG FILE
This so we can do batch printing and not have to maunually assemble dwg file with multiple tabs from the individual dwg files generated by Inventor - as near as I can tell, there is no way to get Inventor to NOT create a separate dwg for each sheet in the IDW???
View 4 Replies
View Related
Jan 3, 2013
As the subject line says, when multiple instances of Inventor are open on the same machine, the addin will only show in the first one. I do not see any errors generated and tried many approaches. I tried to use the ribbon abpannelcontrol
created by the first instance. Or in every subsequent instance of Inventor to delete the existing ribbon abpannelcontrol, and recreate them from scratch. Both approaches did not work.
View 3 Replies
View Related
Jan 11, 2012
I have a spring that is used in multiple assemblies and in each assembly the compressed length is different. Plus the amount of compression is different.
What is the best way to model the spring so if I change the WD or OD, etc. all assemblies would update?
I tried adaptive, but that seemed to limit the relationship to a one-to-one not a one-to-many.
If I used iPart or the spring was derived from a table, where the OD & WD were constant, would the assembly models change when I changed these values?
View 1 Replies
View Related
Sep 26, 2012
I have attached a pic of what I am trying to accomplish.
The part was done in SW, but I am now needing to do it in Inventor.
I have a flat plate, 12" square, that I am needing to bend the 2 corners up, with 10 1/2" between bend lines.
I tried using the "BEND PART", but I can only select one line. What should I use so I can bend all four sides up?
Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
View 6 Replies
View Related
Jan 15, 2013
Is there any way in inventor to use one extrude cut feature on two different solids at the same time?
View 9 Replies
View Related
