AutoCAD Inventor :: Include / Exclude Imates From Two Parts And 1 Whole Part
Nov 15, 2013
I want to exclude imates from two parts and 1 whole part at the same time.
This is my situation:
PartA with 2 sets of imates(for constrains on 3 axis for no movement) on the right side. Set A and set B.
PartB with 2 sets of imates, one on the left side set A and one on the right side, set C.
PartC with 2 sets of imates on the left side. Set B and set C.
i want, in a iPart, part A connected with part C connection with iMate set B. And in the same ipart i want Part A, B and C connected respectively with iMate sets A,C
So in the first situation i want iMates A and C and part B to be suppressed and in the second i want iMate set B to be suppressed.
View 1 Replies
ADVERTISEMENT
Jun 11, 2012
I need use Include / Exclude some components in a Pattern which include an iAssembly. But looks like this option is not available (maybe I missed something)?
I use Inventor 2009, XP32 OS.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
View 9 Replies
View Related
Sep 14, 2012
I currently have to palce a lot of parts from the content center into an assembly and miss essential imates for easy placement. I am using IV2010 at the moment and have no clue where to start.
I have tried copying a new instance of a part into a new library. I then placed this component in the assembly hoping I could add iMates to it in the assembly environment. But when I want to save I get the message that the part has not been checked out for me to use even though I have read/write access to the library.
So a couple of questions here:
As files in the CC are saved in a datapase and not as part files, can imates be included in that database? Do I really need to recreate the part from scratch, and then publish it to the library?
How would it be possible to open up a CC file like in the part edit mode in an assembly?
View 1 Replies
View Related
May 27, 2010
Is there a way to make a part being placed into an assembly instantly adapt using imates?
For instance:New assembly... Place box 1...Place box 2, but have it automatically placed inside of box 1 and sized to fit inside with 1" clearance all around.
View 1 Replies
View Related
Jul 14, 2013
It says i can exclude parts from the assembly, when i insert it as a derived part, but the exclude button is greyed in the insert derived part dialog box.
View 4 Replies
View Related
Nov 14, 2013
im trying to create a point group by including all points and then excluding the points i don't need. it doesnt seem to be removing anything from the group. i used to do this all the time in ldd. is it still possible in c3d?
View 2 Replies
View Related
Feb 1, 2012
Is there an option in drawing mode to exclude certain parts from a section view.
According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.
The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.
I would like to have the option to choose which parts I want to section and which ones I don't.
View 9 Replies
View Related
Jan 16, 2013
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies
View Related
Apr 4, 2011
How do I edit a derived part with a part file and include parameters I'm after?
I cant' seem to work out how to get to the reference components parameters to select whats visible and not visible.
View 3 Replies
View Related
Sep 18, 2013
I have an assembly that I just want to costrain 2 faces and then slide it into place to see how it will fit....But it will not pass through the other parts.[URL]
View 2 Replies
View Related
Apr 4, 2012
attached is a basic IV2012 part made as 1.....can i separate the 2 features and make 2 independant parts from the single part?
If yes can i then use these separate parts and place in assemblies?
View 3 Replies
View Related
Feb 14, 2013
I have a bunch of parts that are almost identical except for a few minor changes each time. Most have already been created in Inventor. My problem is that I want to rotate the part so that a face that was once along the XZ plane will now be in the XY plane. Is there anyway to rotate it like this? I would like to do this so that when I bring it into Mastercam, I don't have to rotate it each time.
Crev64
Autodesk Inventor 2009
View 2 Replies
View Related
Apr 12, 2012
Possible to display Part Area in a Column in a Parts List on an idw?
View 3 Replies
View Related
Aug 12, 2013
I often use a number of parts with only one sketch in them as templates for other parts.
I have for instance a template part with a top view sketch and a template part with a side view sketch.
Mostly I can use one of these template parts to derive my parts.
But now I want to creat a part that needs both the top view and side view sketches. So I need to derive from two different parts.
View 9 Replies
View Related
Mar 28, 2012
I go to the Parts List, Insert a Custom Part, click Apply, Click Ok and nothing shows up. I go back in to Edit the Parts List and the Custom Part is not there at all.
View 4 Replies
View Related
Jan 15, 2012
I don't know what I did, but when I edit a part in an assembly the others won't fade. Where the setting is to make the other parts fade and only show the part I want to edit.
View 2 Replies
View Related
Jan 15, 2012
I did something and don't know what. When I edit a part in an assembly all other parts remain solid and won't grey out or fade like normal. What setting to I need to change, I've messed with the settings for hours and haven't found the right one.
View 1 Replies
View Related
Feb 15, 2013
My issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
View 1 Replies
View Related
Feb 4, 2013
I have made a sheet metal part in inventor (see image). I have made the part as it will be in the finished production state. The problem is that the part is impossible to bend from one single plate, so it has to be made from several plates and welded together.
What i want to do is to remove the four corner plates (denoted with red arrows in the image) and make a flat pattern for these separately.
The reason i made these corner plates in my model is to get the assembled part 100% correct. if i dont, inventor doesnt make the angles that i need between the flanges in the top.
View 3 Replies
View Related
Jul 23, 2013
Is there a way to split this part into multiple parts? I would like to split the part on the corners, leaving a small gap for welding.
View 7 Replies
View Related
Aug 15, 2012
For some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.
View 2 Replies
View Related
May 7, 2012
In AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.
So the drawing gets clear.
How can this be done in Inventor?
With the lines connected to the border?
View 1 Replies
View Related
Apr 29, 2012
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Oct 10, 2012
When I insert a standard 6" square tube into an assembly there are all of the custom shapes and standard structural members to choose from. When I try to put the same tubing into a part file only the custom shapes are visible and no standard parts to choose from.
I can only guess that I have some obscure check box missing. There appears to be no good reason why I would be restricted in part files.
View 5 Replies
View Related
Feb 8, 2013
I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
View 2 Replies
View Related
Sep 22, 2006
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
View 4 Replies
View Related
Nov 12, 2012
I have several parts which I wish to modify, but, those modifications are only being done to get some prototypes made. I do not want the changed (non-approved part) to be used in current issue drawings, assemblies etc. until I have proven the modifications and am happy with them.
I can do this by doing a save as on the part and could just replace the previous design, but then I lose the history of changes/revisions shown in Vault which is critical to me and part of using vault in the first place.
View 3 Replies
View Related
Mar 7, 2013
For some reason, I am unable to use the iMate feature of Autodesk Inventor. I am unable to select iMates on existing parts to assemble them with other parts. I have followed all the instructions for using iMate features, but I always run into trouble because, even though I did indeed enable iMate glyph visibility, and I did do all the other stuff they said, when I click on the iMate glyph, nothing happens. It is as if they weren't even there at all. Selecting the iMates from the project browser on the left doesn't work either; while I am able to select the features, I am unable to move the parts or select any other iMates, except as a group selection, which doesn't let me do anything, either.
View 1 Replies
View Related
May 4, 2013
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
View 7 Replies
View Related
Nov 19, 2011
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
View 6 Replies
View Related
Nov 4, 2011
Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.
Is all this a glitch in the system or is there something in the set-up which is causing this problem?
View 7 Replies
View Related
