I did something and don't know what. When I edit a part in an assembly all other parts remain solid and won't grey out or fade like normal. What setting to I need to change, I've messed with the settings for hours and haven't found the right one.
View 1 RepliesI don't know what I did, but when I edit a part in an assembly the others won't fade. Where the setting is to make the other parts fade and only show the part I want to edit.
View 2 Replies View RelatedI have a machine with some internal parts.To see the inside parts i need to make the outside parts Glass.Can i make the outside parts Glass while in the assembly or do i need to open each part up from there folder and make the material Glass.This would be slow if i need to open up each part to make the material Glass and when finished would again have to open the part up and set back to original material.Can all this be done while in Assembly mode?
View 6 Replies View RelatedI have firgured out how to create a part within the assembly.I have also figured out how to add a feature in an assembly, but that feature does not attach to a
component when I need it to.What I haven't figured out is how to edit an existing part within an assembly to add a feature that references another part. Basically having an external reference (SW term).Also, is there a way to see the features of a part within the assembly?
when i am trying to edit a part in a assembly all the other parts disappear and make it hard to project geometry that is not there.
View 1 Replies View RelatedMy issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
I'm using Autodesk Inventor 2012 SP1 64 Bit on a Windows 7 machine without vault.
I seem to be missing something. I cannot get the parts list in assembly drawing to fill the part number column. See the image below.
The BOM has the part number field filled out as shown below. Is there someway that I need to map the iProperty to the part number column in parts list?
Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.
Is all this a glitch in the system or is there something in the set-up which is causing this problem?
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View Relatedit is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedI have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedI'm trying to build a c# program where I can test a simulation for a robot project I have made angle constraints in inventor and now I want to be able to send numbers to specific joint.
With the code listed below I can get all the constraints from a selected part and get the name of the specific constraints.
I find it confusing that most of the documentation is in VB so this is what I have discovered on my own, perhaps this isn't at all the way to do it.
Inventor.SelectSet selSet=asmDoc.SelectSet;
try
{
[Code].....
I am trying to assembled these 2 parts but the elbow gives no options..how can i constrain the elbow to the straight pipe?
View 7 Replies View RelatedHow could I rename a hole assembly and all parts (pre- or suffix)?
View 2 Replies View RelatedI am designing a component whose internal mechanism is housed in a plastic shell. I want to use the boss feature in the shell so I can hold together the components internally, but the boss feature is only available in the part workspace, but in order for me to know where the internal components are so I can design my shell accurately, I have to be in the assembly workspace.
Now, if I opened the shell as a part alone, and imported (through the Derive command) the parts that need to be fit into the shell, they will appear at random positions, and because you cannot create constraints in the Part Workspace, I have no effective way of holding them where they should go.
I have a question about getting CoG of my assembly. The only problem is that i only need 2 parts (the rest are just dummy solids with 'default material'.
When i control select two parts, right click and go 'iproperties' - the physical tab doesn't let me determine CoG of the two parts combined.
I have 4 columns in BOM that I call out in Parts Lists on my drawings.
I need to be able to organize parts in my assembly somehow and to be able to display if needed (on Parts List) only parts belonging to one category (level?).
I could do it by creating another custom iproperty in a part template and each part would belong to a particular group. Then I could sort them in BOM in .iam environment and have particular category visible on Parts List with the other categories with visibility turned off.
I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.
This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't work.
Inventor pro 2012
Win 7 Pro. sp1 64 bit
Intel Core I7-2600 CPU
Ram - 8GB
Quadro 2000 D
Nvidia 275.89 (tested nvidia 296.70 with no luck)
I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.
Autodesk Inventor 2009