I'm having some problems with ACA 2012 when trying to work with wall styles.
I'm currently on the final year of my IArchitecture degree, up until this point I've used AutoCAD through the AD Student Community , but I've just picked up a book on ACA and was planning to get to grips with it. However, I ran into issues within the first few pages!
When trying to apply wall styles to existing walls in my drawing, I get the following message:
** Canceled - Educational Plot Stamp in source drawing. **
And no wall style is applied. I can edit properties of walls in terms of height and width etc, but can't apply any styles.
I recently downloaded student version of architecture 2011 and works great, but how do I get rid of the message that plots with my drawings, produced by autodesk education product.
I am using the Autocad 2013 educational version. I have a drawing with a .ctb file. When i print, it is printing with the lines in colour. I would like the lines to print in black or grey. I assume I need to change the plotstyle to a monochrome.ctb plot style, but cannot work out how to change the plot style.
Is the plot style changed in the model or paper space of the drawing, or in the print menu?
- I have looked extensively under File/ print and can find nowhere to change a plot style.
- under File/ plot styles I can select from a list of .ctb files - but it only allows me to edit them - not apply them to the drawing.
- In the drawing under the properties inspector i can see a plot style menu and it is currently showing the option ' bycolour' when I click on the pull down options menu, there are no other options. There is also a 'plot table type; but it says this is ' not available'
-When i type plot styles in the drawing it brings up a bring s up an edit plotstyle table window, and this has a pull down menu that displays arrange of plot styles , but when I select one it only allows me to edit the plot style table and save and close. It does not actually apply it to the drawing.
I'm currently working on a project using drawings supplied by others that contain educational version stamps, I just want to make sure I'm not breaching any terms of my license by using all or part of these drawings for commercial use?
I'm having trouble adding a plot stamp to my drawing in AutoCAD 2002. My drawing is in meters and the page in paper space is 0.841m wide by 0.594m high. I can not figure out the setting for the plot stamp to put it in the bottom left corner. This is my first time trying to use a plot stamp so things will need to be explained most likely.
Is it possible to create a plotstamp on the border of the page without dirtying the drawing? Most solutions I've seen on the forums involve an iProperty that is updated when saved, but this would dirty the drawing, so it isn't an option. Also, we need our plot stamp to appear outside the titleblock. My users keep saying "make it work like AutoCAD".
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example: First Layout : Plotstamp resides on Layer 0 Second Layout: Plotstamp resides on Layer 3P Third Layout: EQPT-VC etc
Some general information: Autodesk AutoCAD 2011 64bit Autodesk DesignReview - 2012 Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
So I am running CS 6 and my clone stamp tool has been having issues for the past couple weeks. I go to alt+click a location to get my source, and then as i move somewhere else to starting cloning, it instead uses the exact area i am trying to cover up. The little icon that appears to show you where you are cloning from, is always inside my cursor, no matter where i grab the source from.
Only fix I have found is closing up and restarting PS again, and even then, it only works for one or two clicks then goes back to the issue.
I am trying to mask out a light source in a complex figure. I have just upgraded from PSE 11 -> 12, but I doubt that is the problem. I thought the clone stamp tool in Editor was simply not working. When I'd drag (after setting a source) over the bright area, it would darken where I dragged.
From experience it seemed like it was marking the area it was going to modify - but this turned out to be the extent of the modification. It just stayed dark. Following other discussions, I adjusted my depth of history to ease RAM footprint, restarted Editor, and rebooted my Mac (OSC 10.9). I also twiddled with all the options under Clone Overlay. I could see the effects, but they did not fix the issue. When I try the Clone Stamp tool elsewhere, it does what I expect.
I'm suspecting pilot error, but don't know what else to try.
when i open dwg file. message shown , plot stamp detected.and when i give plot drawing print with message " PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"
When I try to open or create drawings in autocad (which i downloaded recently from the edu community) it gives me a warning which says "the drawing file being opened was not created by a product from an autodesk education suite. if you save this drawing it will always be plotted with the follow plot stamp: produced by an autodesk education program.it is recommended that you save this drawing with a different file name." but I have saved and resaved drawings, tried different extensions and still it won't plot or print without this plot stamp. What is most likely causing it and what can I do to remove it.
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
Right now I have a few lines in the ACADDOC.lsp file to set up the plot stamp for all users. I would like to just turn on the plot stamp and auto load a custom .pss file that I have set up.
I recently switched to a new machine and manually copied and pasted my custom settings over and set paths to the new location. Everything seems to work fine except when I click on "Plot Stamp Settings".I receive an error that says "Data Link Files" and sometimes it says "LISP".
We used a block which contains deisel expressions for our plot stamp. When we publish through the sheet set manager it shows a temp folder where the drawings are spooled to instead of the actual drawing saved path. We can fix this buy turning off background plotting when we publish, but I was wondering if there is a way to show the saved path instead of the spoolled path when publishing in the background.
Below is the expression found in our plot stamp block.
We do most of our drawing in 2D – quaint I know, but that’s the way the office works. On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.
The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.
The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.
I was asked to create a digital signature for a principal architect, the first thing that comes to mind is scan his signed stamp then insert as a raster image.
When I use the pdf plot drivers from AutoCAD or the export to pdf option the resulting pdf is not available to the other computer trying to access it through a shared folder.
When I plot to pdf with batch plot or export the drawing to pdf and save the file in the shared folder, the other computer can not open the pdf (file not found) or attach the file to an email (you do not have permission)
Why is this? All other files share and open fine. Only pdf files from batch plot, plot to dwg to pc3, or export to pdf. This is a pain and I still have to use another plot driver (cutepdf) to get a fully useable pdf for our office.
Is there anyway to remove this stamp from the drawing when going to print it? I started a drawing on my personal laptop and have now moved to my work laptop and the stamp makes the drawings look unprofessional.
Is there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
I have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
Is there a short cout to getting to the source drawing file containing block data? Drilling down into the Program Files folder is tedious in the heat of getting drawings done.
