How do I accurately set the scale on a raster underlay based on 2 (or more) points where I know the distance between them?
In fact I would like to do this on 2 axes separately so that it stretches.
I am used to georeferenceing like this and getting raster underlays the right shape for the coordinate system I am using. How I can do this in AutoCAD, which used a very simple coordinate system.
AutoCAD 2010
Is there a way to change a pdf underlay path when drawing files are moved?
Is there a way to set the pdf path to match the drawing location so when a drawing?
and pdf is moved and they have the same path the pdf will be linked to the drawing?
The same can be asked about raster image files & AutoCAD?
Is there a way to set the raster image file to match the drawing location so when a drawing and rastor image is moved and they have the same path the raster image will be linked to the drawing?
I'm redoing some old projects in Revit, and I'm using a background image to vastly facilitate the process as the projects are almost perfectly drawn, I'd like however, to use a background image as reference and keep the underlay (e.g.: show the bg image for level 2 and over it show the level 1 underlay) but I couldn't find a way to do that.
View 2 Replies View RelatedI have a drawing (attached) with the following settings: LTSCALE = 1, MSLTSCALE = 1, PSLTSCALE = 1.For some reason the linetype is not scaling based on the annotative scale. It will update correctly if I change the LTSCALE but for some reason it wants to ignore the MS and PSLTSCALE variables.
As a note, the drawing was converted from a Microstation drawing and the linetype is a converted Microstation linetype.Is there something in the linetype that is doing this.
it doesn´t work, when pushing the button "minus"...
i can´t scale down the raster in the preview...only two pictures can be seen...
9-slice scaling doesn't appear to work when applied to symbols based on an embedded raster image.Is this a known limitation or am I doing something wrong?It works fine with vector-based symbols. I'm using Illustrator CS6.
View 2 Replies View RelatedMy girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies View RelatedAfter loading a single 24x36 road plan and profile PDF drawing as an underlay, Autocad is so slow and jerky I couldn't work with it. The PDF file size is about 1 MB. I need to load at least 10 more, so it is a hopeless endeavor to use the PDFs. I'll have to convert them another format such as to JPG to get the job done.
How to use this functionality, but if the performance isn't greatly improved it might as well not even be included in the product.
Client of mine has been experiencing slowness with AutoCAD LT 2013.
The program works fine when working on floor plans. However when they open up any PDFs to be using as an underlay, AutoCAD LT performance on scrolling up/down left/right moves as a snails pace.
PC Specs are: Intel Xeon W3505 @ 2.53Hz, 3Gb ram, Windows 7 Pro 32-bit, nVidia Quadro FX 580
Currently about to suggest upgrading the video card to a Nvideo Quadro 2000 1Gb Video card. Would this solve the issue that my client is having the the slowness when scrolling when a PDF underlay is used.
Is there anyway to be able to edit a PDF document while the drawing it's referenced in is open?I would have thought that a PDF underlay would have worked in the same manner as an external reference does.
We use crystal reports to create reports from the drawing, export to PDF and insert back into the drawing.Then when items are released for ordering and received the PDF is stamped as such and the underlay reflects that progress in the drawing.
But if a user has the drawing open the PDF is locked for editing.
pdf has the same layer state as these were in autocad file
this pdf is attached as pdf underlay is it possible/ how to on/off the layers of this underlay
I'm using a PDF overlay which looks perfect in CAD and print Preview. When printing to PDF the quality drops to a level which is useless. I have tired increasing DPI and Quality settings but the outcome is the same.
Print Screen Of Print Preview - Notice Quality of text on the panel
Print Screen Of Actual PDF - Text unreadable...
[URL]........
EDIT-- It seems I can't upload an image big enough to show the issue. You'll have to take my word for it.
I'm not sure if I have a difficulty with all .pdf plots from AutoCAD, or if it mainly concerns those with .pdf underlays. I am generating some drawings usings .pdf underlays with other information added to the underlay information.
The underlay appears to be exhibit good line and text resolution. When I zoom into the overlay, I can read the information and the quality looks great.
The problem seems to be when I then plot a drawing as a .pdf. Using Acrobat to increase the zoom level, the lines and text on the drawing become very distorted and are hard to read.
I am having trouble getting a DXF underlay to plot clearly and boldly. I insert the ref to the dxf, then, in paperspace, create viewport, etc. I plot all files to pdf (seperate install) for record purposes. When plotting this file, the dxf is very faint--even though the preview is very bold and dark.
View 4 Replies View RelatedI can't figure out if underlays are part of a layer/connected to a specific layer or another thing altogether.
View 8 Replies View RelatedAny way to scale points, and or objects in a 2 dimensional manner only? I've got a bunch of survey points imported from a csv file, and they are at a grid scale. I need to scale the data by a factor of 1.000125 in this case to get ground distances between the points for the client. I do not want the elevations to change.
In LDDT this was not an issue as I always had the points inserted at zero elevation, but they maintained the elevation data as part of the point. It seams that in Civil 3D my points automatically appear at true elevation, so when I scale a group of points, the elevations changes as well as the elevation of any lines connected to the points. Is there a way to work 2 dimensionally with 3D data?
I wanna interpolate points from surface but only in that area where my sample lines intersecting with the surface. There is a point creation tool that makes this based on polylines but I have to many data and it will get to much time to do this. So, for better understanding I attached some pictures, in the first picture it is shown the final result which I have made based on polylines, but here is also a problem, the tool is not putting points where the surface is changing ( on my second picture I highlighted with red circles).
View 5 Replies View RelatedI have a surface made by a wide array of points and a line of points that i need to use that surface to assign elevations to ..
View 3 Replies View RelatedI have a drawing that refuses to plot the raster image when i plot to a PDF. It will plot the raster when I send it to the plotter. The raster is visible in the print preview. I've tried using the Adobe PDF driver and the DWG to PDF.pc3.
All I get is the line work.
Plot tranparency is off. Image is at Brightness 50, Contrast 50, Fade 0.
Autocad Map3d 2013
How many raster images can I add to an AutoCAD drawing?
Is there a limit? If so what is this limit and how can I change it?
My boss has been having problems with some drawings containing Raster Images, they display on every workstation besides his.
The saved path is correct but the images all list 'Unreferenced' as their status, I've tried reloading them and even detaching before reinserting them but to no avail. He is running Autocad 2013 (SP2 installed).
Also, he's had this problem for awhile now but it's happening on his brand new pc too, which suggests a possible network problem? He's on the same wireless network as half of our office but he's the only one experiencing this issue.
I am having some problem with plotting Raster image.
From time to time I need to use raster image as a background such as the example in the attachment. Here you can see that the raster image is only plotting half of the image.
I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
Insert a Raster Image or an OLE object (like a selection from a XLS worksheet).
Explode the Raster Image/OLE object.
=> the Raster Image/OLE dissapears and the frame remains (LINE objects).
I think that these types of entities should not allow exploding.
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
I need to know how to set up my dwg so that 1cm = 1in. when I'm drawing.
View 6 Replies View RelatedLets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?
Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.
I'm trying to scale down 3D drawings but when I use the 3DSCALE command the perspective gets distorted. Is there a way I can scale my drawing without messing up the perspective?
View 7 Replies View RelatedWe receive site survey dwgs generated in Civil 3D that contain 3D topos with elevation tags. The elevation tags are clearly scalabe anno objects that scale correctly in the received civil dwg. The elevation tags won't scale correctly in our dwgs - they come in too small to see.
- Both dwg's have units set to decimal.
- I tried copying / pasting the viewport from the civil dwg to our dwg and the text is still too small. This tells me it's a dwg specific variable and not a viewport setting.
- I have Civil 3D object enabler installed, though I don't think this has any bearing.
It would be nice to use the original tags and not have to re-create every elevation tag.
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.