My plan designer uses Chief Architect and has converted his drawing into a DWG for me to use in AutoCAD 2013. When I open the drawing however, it is not to scale. I've tried importing it using the copyclip command to a blank drawing but it doesn't convert to scale. When I've tried using the scale command it doesn't scale properly.
View 9 Replies
How to use Chief architect software? its similar to autocad but it does not have commands ...
View 2 Replies View Relatedhow you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies View RelatedI'm running into a problem today setting up a drawing. The drawing has three viewports at different scales all looking at different parts of a model I have xrefed. The problem is that when I set a viewport to 1" = 50' for example, it is really being set to 1" = 50" -- off by a factor of 12. I cannot figure out where this problem stems from, but it is driving me a little crazy at the moment. I can work with it, by setting the scale with this correction factor in mind, but I would rather be able to set my viewports correctly, in case someone uses this drawing later as a go by or to do revision work.
View 1 Replies View RelatedI am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.
View 1 Replies View RelatedI created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
I need to know how to set up my dwg so that 1cm = 1in. when I'm drawing.
View 6 Replies View RelatedLets say that I want d drawing to be printed on scalw 1:50 why do I need to input at the plot properties 20mm to 1 unit in order to get it correct?
Also different question. If i want to print on paper roll and the one dimension of my drawing is 297 (A3) and the other dimension is undifined how can i set the paper size? Because under the drop down menu paper size the sizes are all fixed.
I'm trying to scale down 3D drawings but when I use the 3DSCALE command the perspective gets distorted. Is there a way I can scale my drawing without messing up the perspective?
View 7 Replies View RelatedWe receive site survey dwgs generated in Civil 3D that contain 3D topos with elevation tags. The elevation tags are clearly scalabe anno objects that scale correctly in the received civil dwg. The elevation tags won't scale correctly in our dwgs - they come in too small to see.
- Both dwg's have units set to decimal.
- I tried copying / pasting the viewport from the civil dwg to our dwg and the text is still too small. This tells me it's a dwg specific variable and not a viewport setting.
- I have Civil 3D object enabler installed, though I don't think this has any bearing.
It would be nice to use the original tags and not have to re-create every elevation tag.
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
Is there a way to set the Multileader scale for DIMSCALE when it is on the tool palette like you are able to do with every other block? Maybe a lisp routine so set the Multileader style and to dimscale?
View 4 Replies View RelatedI still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
I'm currently trying to make an MV block which is a combination of a 2D symbol and its 3D representation. I want the 2D symbol to scale in line with the annotation scale so have set the annotative flag on my symbol block but I do not want the 3D representation to scale so this does not have the flag set. However, when I put the two blocks into my MV block and then alter the annotation scale, both the 2D and 3D blocks both scale.
Is there something more that I need to be doing to to make the two blocks act independently and comply with the annotative flag set on them? I have seen this behaviour work on MEP2013 but can't see anything different on its 'devices' and my simple blocks.
When I import a drawing using XREF command from one file to the new file the scaling between model space becomes all messed up. making the adjustments between the two?
View 7 Replies View RelatedI am attempting to import a previous customized menu with routines that worked beautifully in Autocad 2002. I can import the menu but the routines don't work. I have copied the search paths identical to those in Autocad 2002 in the tools>options>files in the support file search path, but to no avail.
The menu was developed by Andy Pease (Andy Acad) who is now with Autodesk.
I'm rendering an equipment shelter that sits atop a gravel pad. I've picked the "Gravel Crushed" material, and it looks OK, but I'd like to be able to scale the material so it isn't so "fine". I'd like it to be more coarse.
How to change the scale of the material?
I have just upgraded from AutoCAD 2008 to 2013 so I'm unfamiliar with the latest set up & dont' have time to explore it properly yet. I see that 2013 has a different projection method for paper space views but for the present I am still using solview & soldraw which I am familiar with to get my work done on time.
In 2008 the 'Linetype manager' page let you tick a box 'Use paper space units for scaling' so that different paper space view ports would automatically scale line types to suit the viewport scale. To draw details of parts of a view I would normally copy the basic solview view port, alter its property to a layer named VPORT, scale this viewport to the desired scale to show what I want to detail & the linetypes would automatically scale so that they appear the same as in the original solview view port.
This pick box is not in the linetype manager page in 2013, how can I achieve this?
I have MSLTSCALE >0, LTSCALE>0.5 & PSLTSCALE >1
I have this draft with the parameters given. I need to correctly make this a 3D...How do I insert the parameters given, so the draft correctly rise accordingly to the planes?
View 5 Replies View RelatedWhen I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies View RelatedHow do I accurately set the scale on a raster underlay based on 2 (or more) points where I know the distance between them?
In fact I would like to do this on 2 axes separately so that it stretches.
I am used to georeferenceing like this and getting raster underlays the right shape for the coordinate system I am using. How I can do this in AutoCAD, which used a very simple coordinate system.
We have been having an issue with this for a long time in hopes of it being fixed in any new release. If I click Diameter and pull it to the OD of hte circle it shows as in the picture which is what we want. If I pull it to the ID it pulls straight from that point and the dimension is not level.
The only way we can fix it is click on it, go to properties, scroll down to text, and in the text rotation box, type 90.1 and hit enter.
Is there if fix for this issue?
In AutoCAD 2011 and 2012 my spell check instantly recognizes a misspelled word as soon as you enter a space after the word as you type.
AutoCAD 2013 does not recognize the misspelling until I go back (still within the text editor) and click on the word. Only then will it show the red underline. This is using Dtext only. Mtext works fine.
For the bad spellers or missed keystrokes, the fast "on the fly" spell checking was great. How to get my AutoCAD 2013 to behave similarly?
I am using Autocad 2D for a drawing, and my lineweight refuses to plot correctly. I didn't use a ctb file, but I changed them by hand each one. Most of them works correctly but some of them not. When I go to the properties window, every of them have the good lineweight, it's when I plot them in pdf file and open them in Adobe reader, some still have the 0mm (wrong lineweight). However they show they are the good size in properties window, but they plot differently.
I just realize that when it shows in adobe reader it shows the wrong lineweight, but if I convert the pdf into a jpeg and open it with windows photo viewer, it shows the correct lineweight.
I am using AutoCAD LT 2013 and at the moment i am just using the dwg to pdf.pc3 included in AutoCAD.
All of the text in my drawings is the same font (ISOCPAUS). Up until about a week ago, i could plot bold & italic text using the dwg to pdf plotter. Now, I cannot and i don't know what has changed to make this happen. Underlined and overlined text still plots fine to pdf. Everything appears correct in model space, paper space layouts, in previews and if i plot to any of the printers in the office, but once i plot to pdf, the bold and italic is gone.
I have autocad running on my partitioned mac and I have just created a multileader style with Datum triangle filled as the arrowhead symbol. In the view panel the symbol looks correct, but when I select the multileader with this datum style and add it to my drawing it appears as an unfilled triangle!
View 2 Replies View RelatedWe have dwg auctocad 2010, and there are some Arabic Text in the cad dwg,
When I convert cad dwg into PDF file, It arabic Text not showing correct Arabic language.
Arabic Text show separate separate alphabat why ?
How I could convert cad dwg so that aracbic text should be show correctly in PDF file ?
Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
CorelDrawX6 user reporting that she imports a PDF file into CorelDrawX6 (Windows 7 pro, 64-bit system, version is X6 with update 2 and Hot patch applied, Windows OS is fully updated). Taking a pdf file scaling up to full scale, she is not getting the correct measurements. She tested it to see if the same thing happened on another user's computer that is XP Pro XP3 with CorelDraw X5 and it does not have the same issue.
So it may be in CorelDraw X6 (she moved to X6 recently). Also, she said it does not happen consistently. Yesterday this was a problem, today with the same file it appears to be OK.
