AutoCAD Architecture :: Dimension Obliques Not Scaling Correctly
Oct 3, 2013
I am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.
I'm running into a problem today setting up a drawing. The drawing has three viewports at different scales all looking at different parts of a model I have xrefed. The problem is that when I set a viewport to 1" = 50' for example, it is really being set to 1" = 50" -- off by a factor of 12. I cannot figure out where this problem stems from, but it is driving me a little crazy at the moment. I can work with it, by setting the scale with this correction factor in mind, but I would rather be able to set my viewports correctly, in case someone uses this drawing later as a go by or to do revision work.
how you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
My plan designer uses Chief Architect and has converted his drawing into a DWG for me to use in AutoCAD 2013. When I open the drawing however, it is not to scale. I've tried importing it using the copyclip command to a blank drawing but it doesn't convert to scale. When I've tried using the scale command it doesn't scale properly.
I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
When I upload a drawing from the internet I save it as a wblock.when I insert it into my exixsting drawing it is not scaled to the same dimensions as the rest of the drawing.
I change the units to the same as the drawing befeore I save it as Wblock. But Im still having this Problem.
I have been working on a project and ran into some complications. I have an object that I would like to scale the length down, but leave the height and width as they are. I read around and found out I can use block and use that to scale the object. however, once I used block I was not able to use the Boolean operators to subtract from the newly scaled object. If I hold my mouse over the object, it is a called a block reference.
My question is, is there a way to change the y-dimension but still be able to play around with the object?
After I had done all on detail drawing and dimensioning in inventor 2010.idw, my customer want it in 2004.dwg format and they want all drawing to be in files and in model space..And here the problem I face:
1) Base drawing is 1:1 and detail drawing is 4:1, redo a dimension in base drawing is ok but in detail drawing re-dimension it show 4 times the size. I had tried using view port/ scale area still can't.
2) When copy and paste Drawing A to Drawing B the detail drawing fence run out of place and scale. What I do is right click and do a block editor.
Looking for good solution for the above problem during conversion of IDW to DWG.
I have the same problem and want to scale only in one direction. Through the search I find out that the solution is block/insert and I use it.But what is my problem?, Dimension lines.
My drawing has dimension line and I want AutoCad to change the dimension value after inserting according to scale factor. How can I do this? At present after scaling in one direction, dimension value remains same as before scaling.
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
We have been having an issue with this for a long time in hopes of it being fixed in any new release. If I click Diameter and pull it to the OD of hte circle it shows as in the picture which is what we want. If I pull it to the ID it pulls straight from that point and the dimension is not level.
The only way we can fix it is click on it, go to properties, scroll down to text, and in the text rotation box, type 90.1 and hit enter.
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
how to get the annotative scale to work with schedule tags.When I use attributes in blocks I draw the attribute definition with a height that I wish it to display in PaperSpace. Then when defining the block I select the annotative scale so that the block and text display correctly in any viewport.
However when I create Scheduling Tags using the Create Tags button on the Annotate/Scheduling tab it shrinks the text by 1/8" as soon as the tag is created. I've made sure that the scales are set to 1:1 when I create it. I guess I can just enlarge the text 8 times before I make the Tag.
I have a building plan that needs to be in 1:100. When put my drawing into the new layout its there. Then when I change the scale, my drawing disappears.
when i start up Autodesk AutoCAD Architecture 2010 or 2011 (I tried both versions) I get the error message:acad.exe - Application error
The application could not be started correctly (0xc0150002)I searched the internet without any luck, many people have this problem with other programs, but nobody has a solution!
The funny thing is, it worked (2010) then suddenly it stopped working... I uninstalled and reinstalled 2010, didn't work, then I thought lets try the newest version, exactly the same error! Other programs work properly, also other Autodesk programs like Inventor 2008.
Windows is up to date AutoCAD Architecture is up to date (SP1) Installed the newest Graphic Driver
So I create a block on layer 0 and then create the block as a 1 inch by 1 inch block so it is easy to scale up to the size I need but when I try to insert the block at the scale I need it wont resize it to the correct scale. It stays at the 1 inch by 1 inch original block.
Attached is a dynamic block of a smoke/c.o. detector. I have a few of these on a floor plan and at times the entire floor plan needs to be mirrored. I would like the text itself to mirror as well so I don't have to select each dynamic block and mirror it again to read correctly.
I have mirrtext set to 0. I have read that creating attributes will solve this problem however I have created attributes in the dynamic block and I still cannot get it to read correctly when mirrored.
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
I am running ACA 2011 X64.I have some leaders that I copied from one drawing into another drawing.
When copied the leaders do not display their attributes. I cannot seem to figure out how to do it. I have made sure they are both in the same annotative scale and that both have the current scales loaded.
I created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.
I'd like to apply a property set to a dimension, tag it, and have the tag display the dimension value. This tag would be remote from the dimension, and on a separate layer, which would remain on when the dimension layer is frozen.
At present, the property set for dimensions appears not to include the dimension value.
I'm using different dimension styles for different scales on my drawing, however, if i change one dimension style text to a certain size, all of the others change too, is there something i'm doing wrong? I need every dimension style to be its own text size, but i'm having to manually change them every time.
I am trying to dimension a room in AutoCAD 2014, drawing in Architectual mode using the default template. I attached a screenshot of what I am seeing, the red lines are my dimensions but they show up with no text and I cannot figure out how to get the text to display.
I am using AutoCAD 2010 and when i go to print my design to PDF or even to a printer, the dimension lines do not show up. I have checked my layers and the dimension lines are not on defpoints, in fact they are on layer 0. I have tried to create a new layer and it still does not show up in the work space, let alone when i try to print it.
Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
I am trying to override a dimension to provide a +/- at the end of one ACA dimension. I added the override, but it is not showing up - even after a regeneration...
I seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
I have recently started using Architect 2012. We use Architectural Tick for dimensioning.
The problem is the Architectural Tick arrow is not coming in at the proper scale (Arrow head size = 3/32", dimscale varies). The arrow head seems to be out by a scale factor of 25.4 (found by trial and error).
If so is there a software patch or workaround. Can the Architectural Tick block be edited and if so where is it?
