AutoCad :: Changing / Scaling Just The Y-dimension
Dec 5, 2011
I have been working on a project and ran into some complications. I have an object that I would like to scale the length down, but leave the height and width as they are. I read around and found out I can use block and use that to scale the object. however, once I used block I was not able to use the Boolean operators to subtract from the newly scaled object. If I hold my mouse over the object, it is a called a block reference.
My question is, is there a way to change the y-dimension but still be able to play around with the object?
View 7 Replies
ADVERTISEMENT
Nov 23, 2011
When I upload a drawing from the internet I save it as a wblock.when I insert it into my exixsting drawing it is not scaled to the same dimensions as the rest of the drawing.
I change the units to the same as the drawing befeore I save it as Wblock. But Im still having this Problem.
View 9 Replies
View Related
Nov 20, 2011
After I had done all on detail drawing and dimensioning in inventor 2010.idw, my customer want it in 2004.dwg format and they want all drawing to be in files and in model space..And here the problem I face:
1) Base drawing is 1:1 and detail drawing is 4:1, redo a dimension in base drawing is ok but in detail drawing re-dimension it show 4 times the size. I had tried using view port/ scale area still can't.
2) When copy and paste Drawing A to Drawing B the detail drawing fence run out of place and scale. What I do is right click and do a block editor.
Looking for good solution for the above problem during conversion of IDW to DWG.
View 2 Replies
View Related
Mar 28, 2012
I have the same problem and want to scale only in one direction. Through the search I find out that the solution is block/insert and I use it.But what is my problem?, Dimension lines.
My drawing has dimension line and I want AutoCad to change the dimension value after inserting according to scale factor. How can I do this? At present after scaling in one direction, dimension value remains same as before scaling.
View 9 Replies
View Related
Oct 3, 2013
I am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.
View 1 Replies
View Related
Dec 15, 2013
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies
View Related
Mar 26, 2012
I've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies
View Related
Oct 28, 2009
Any way to scale points, and or objects in a 2 dimensional manner only? I've got a bunch of survey points imported from a csv file, and they are at a grid scale. I need to scale the data by a factor of 1.000125 in this case to get ground distances between the points for the client. I do not want the elevations to change.
In LDDT this was not an issue as I always had the points inserted at zero elevation, but they maintained the elevation data as part of the point. It seams that in Civil 3D my points automatically appear at true elevation, so when I scale a group of points, the elevations changes as well as the elevation of any lines connected to the points. Is there a way to work 2 dimensionally with 3D data?
View 9 Replies
View Related
Dec 6, 2012
I use AC 2013 LT.
1)When switching between the Drawing and Annotate option to the AC Classic option a menu would appear with options to use the civil menu, mechanical or architectual. This has now dissappeared and I do not know how to acces it again.
2) Coming from a manual drafting background scaling appeared to be easier. I want to change the template scale shown in the title block from 1:1 to 1:5. This seems to be able to be done as it is highlighted. All my efforts save to enter it hard does not work, but this does not change the sheet scale. Changing the scale on the menu bar does not affet the sheet scaling
View 4 Replies
View Related
Mar 9, 2012
I have approximately 800 library files that I would like to change the Dimension Style on. Is there a way or some program out there that would allow me to change the Dimension Style on all 800 drawings at once or do I need to open each one up change and save?
View 3 Replies
View Related
Sep 23, 2011
I have a dimension line that says 5' and I want to change only the number to 8'.
View 9 Replies
View Related
Jan 17, 2013
My professor wants all of our dimensions to have 2 decimals places except for a few that he wants to have 3 decimal places. How do I change those few to have 3 places while everything else has 2?
View 1 Replies
View Related
Sep 14, 2013
I want to change the text in my dimension. I don't actually want to change my the actual dimension, just the text. Is it possible? I want to create drawings that aren't to scale, and put in the dimensions that I want on there.
View 1 Replies
View Related
Jul 9, 2012
How do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
View 4 Replies
View Related
Nov 25, 2011
I have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies
View Related
Oct 15, 2012
I want to override the measurement in a dimension with a string of text using a LISP command.
E.g.. "select dimension"
type new text for dimension
replace dimension measurement with new text. I can get the entity and its values, buy not sure which value to change for the "text override".
BTW Acad 2012.
View 3 Replies
View Related
Feb 29, 2012
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
View 2 Replies
View Related
Sep 30, 2013
In my code, I create a copy of dimension style:
s3 = New DimStyleTableRecords3.CopyFrom(vz)s3.Name = nazovtst.Add(s3)_trans.AddNewlyCreatedDBObject(s3, True)
_trans.Commit()
Then, in another part of the code, I open the new style and change a property:
Using trans As Transaction = db.TransactionManager.StartTransaction ds = trans.GetObject(ds.ObjectId, OpenMode.ForWrite) ds.Dimtxsty = s2TextStyle.ObjectId trans.Commit() End Using
this works OK for the first time, but when I run the code again, I don't create the new style, I just take the existing one and changing the Dimtxtsty property to the value it already has causes AutoCAD crash
View 5 Replies
View Related
Feb 13, 2013
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies
View Related
Dec 3, 2013
I would like to change the default settings for a Radius dimension, Extension value from "On" to "Off".
I have no trouble changing the dimensions one at a time, but that doesn’t change the default value in the template.
View 6 Replies
View Related
Aug 9, 2012
I just got a new job with AutoCAD 2011. In the previous version (was using 2008 beore), I could select all lines, dimensions hatches, and then change the dimension style. But with this new version, as soon as I select anything that is not a dimension, like a hatch pattern or a regular line, I can't change the dimension style anymore. Is there anyway to change this back to how it was?
View 2 Replies
View Related
Jul 4, 2013
How to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies
View Related
Oct 1, 2012
How to switch the order of the layers of a wall without changing the dimension,
In the screenshot below, I wanted to switch the order of the layer without changing the dimension. Is that possible?
View 5 Replies
View Related
Mar 24, 2009
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies
View Related
May 7, 2012
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
View 1 Replies
View Related
Sep 13, 2013
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
Jun 2, 2011
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 10, 2012
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
View 9 Replies
View Related
Dec 4, 2013
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies
View Related
