My professor wants all of our dimensions to have 2 decimals places except for a few that he wants to have 3 decimal places. How do I change those few to have 3 places while everything else has 2?
View 1 Replies
I am running AutoCAD Map 3D 2011. When i use the ID command to acquire x,y coordinates by snapping to an object, it gives me only one decimal place. When i do the command out in space, it gives me 4 decimal spaces. I need to get at least two decimal places while snapping to objects. Examples below:
id command (out in space, not using osnap)
X = 4006431.3366 Y = 359556.5635
id command (snapping to entity)
X = 4006252.3000 Y = 360712.5000
by the way, my units precision is set to .00 and it doesnt seem to make any difference with the id command.
I have used stringer connect in the past and it seemed that my traverse shots (which went to four decimal places 0.0000) that were in my raw file were converted to a fbk file and it held the decimal places. Now when I use it, the program rounds my shots to three decimal places (0.000) which changes the locations just slightly. I don't think I changed any settings deliberately. How can I get my four decimal places back?
View 3 Replies View RelatedWhy does the Round() function require that the number of decimal places be either a number or an object if you want to use a variable? It seems that a Single should work here, but iLogic won't accept it.
See sample code below which is rounding off dimension values. If I dim the variable "somenumber" as Single or Double, I get this error message from the Round() function: "Overload resolution failed because no accessible 'Round' can be called without a narrowing conversion."
When I dim "somenumber" as an object it works, but this seems unnecessary when all it is storing is a single digit number. Why wouldn't Single or Double work for this variable?
Here's the code snippet:
'Dim Current Sketch & Count Constraints
Dim oSketch As Sketch = ThisApplication.ActiveEditObject
Dim oDimCount As Single = oSketch.DimensionConstraints.Count
[Code]....
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
I have a couple of strange angles and moving parts going on in an assembly. there is 1 constraint i am happy for inventor to predict the offset for. the problem is I am using other constraints i later want to bin, to pin it in position then try to apply this constraint. it looks like the predict offset tick box only measures to 3 dp, so as soon as i apply this constraint my model goes sick. I have to take a measurment and copy and place the measurment with all dp's into the constraint to make it work.
Is there a setting to specify the predict offset number of decimal places?
The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
I'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
I work with ANGTOS and ANGTOF quite a bit. I'm working with latitude and longitude conversions in MAP 3D for an application where accuracy is top priority. Most of the time ANGTOS (and RTOS, for that matter) return an accurate result for the number if decimal places requested, but then I run into a situation like this:
Command:
(angtos (angtof "120.0") 1 16)
"119d59'59.999999999949""
I got it to return properly by specifying only 13 decimal places, but the result makes conversion between coordinate systems inaccurate.
I was trying to use the guides to make a triangle and everything was fine until I used a third guide on one of the triangles points (2 guides; 1 at 90 degrees and 1 at 60 degrees). When I used the dimension tool on it to measure from the bottom of the page to that point, the measurement did not match the numbers in the 90 degree guide's info. It was like .0000007 or .00000007 inches off. I know that's not much but I really needed precision for my particular drawing and I dont know how to get more accurate measurements with the program rounding to the nearest 6th decimal place (the highest setting on drawing precision). If it says it's centered in the intersection, then why do I see a tiny micro right triangle when I zoom in?
View 2 Replies View RelatedIs it possible, when I dimension, to have decimals in apex?
View 7 Replies View RelatedIs there any way when I am dimensioning something to make it read feet and decimals of a foot for instance.
Instead of it reading 5’-6 9/16” it would read 5.546875’?
I tried a few different things on the dimension style and I can get it to read out in decimal inches (it would be 66.5625” with the example givin) but not feet.
The reason I need it is for a program that we run where we must enter the measurement in decimal feet
Way to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 2 Replies View RelatedWhen I save to acad my Dia dimensions are changing to a 4 place decimal. My radius dims stay the same.
INV 2009 SP 2.
I have approximately 800 library files that I would like to change the Dimension Style on. Is there a way or some program out there that would allow me to change the Dimension Style on all 800 drawings at once or do I need to open each one up change and save?
View 3 Replies View RelatedI have a dimension line that says 5' and I want to change only the number to 8'.
View 9 Replies View RelatedI have been working on a project and ran into some complications. I have an object that I would like to scale the length down, but leave the height and width as they are. I read around and found out I can use block and use that to scale the object. however, once I used block I was not able to use the Boolean operators to subtract from the newly scaled object. If I hold my mouse over the object, it is a called a block reference.
My question is, is there a way to change the y-dimension but still be able to play around with the object?
I want to change the text in my dimension. I don't actually want to change my the actual dimension, just the text. Is it possible? I want to create drawings that aren't to scale, and put in the dimensions that I want on there.
View 1 Replies View RelatedHow do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
I have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies View RelatedI want to override the measurement in a dimension with a string of text using a LISP command.
E.g.. "select dimension"
type new text for dimension
replace dimension measurement with new text. I can get the entity and its values, buy not sure which value to change for the "text override".
BTW Acad 2012.
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
In my code, I create a copy of dimension style:
s3 = New DimStyleTableRecords3.CopyFrom(vz)s3.Name = nazovtst.Add(s3)_trans.AddNewlyCreatedDBObject(s3, True)
_trans.Commit()
Then, in another part of the code, I open the new style and change a property:
Using trans As Transaction = db.TransactionManager.StartTransaction ds = trans.GetObject(ds.ObjectId, OpenMode.ForWrite) ds.Dimtxsty = s2TextStyle.ObjectId trans.Commit() End Using
this works OK for the first time, but when I run the code again, I don't create the new style, I just take the existing one and changing the Dimtxtsty property to the value it already has causes AutoCAD crash
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View RelatedI would like to change the default settings for a Radius dimension, Extension value from "On" to "Off".
I have no trouble changing the dimensions one at a time, but that doesn’t change the default value in the template.
I just got a new job with AutoCAD 2011. In the previous version (was using 2008 beore), I could select all lines, dimensions hatches, and then change the dimension style. But with this new version, as soon as I select anything that is not a dimension, like a hatch pattern or a regular line, I can't change the dimension style anymore. Is there anyway to change this back to how it was?
View 2 Replies View RelatedHow to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies View RelatedHow to switch the order of the layers of a wall without changing the dimension,
In the screenshot below, I wanted to switch the order of the layer without changing the dimension. Is that possible?
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
View 1 Replies View Related
