CorelDRAW Graphics Suite X5 :: Centering And Measurements Past 6 Decimal Places?
Apr 8, 2012
I was trying to use the guides to make a triangle and everything was fine until I used a third guide on one of the triangles points (2 guides; 1 at 90 degrees and 1 at 60 degrees). When I used the dimension tool on it to measure from the bottom of the page to that point, the measurement did not match the numbers in the 90 degree guide's info. It was like .0000007 or .00000007 inches off. I know that's not much but I really needed precision for my particular drawing and I dont know how to get more accurate measurements with the program rounding to the nearest 6th decimal place (the highest setting on drawing precision). If it says it's centered in the intersection, then why do I see a tiny micro right triangle when I zoom in?
View 2 Replies
ADVERTISEMENT
Jan 22, 2013
I'm trying to vertically center text in a cell (in a table of course). So far, I have tried Align and Distribute when the cell is active, using text selector. I have also tried selecting table tool and highlight a column, then trying Align and Distribute functions. Both are no-go.
View 2 Replies
View Related
Apr 10, 2012
So I'm working on a website layout this morning with parts and pieces all over my artboard. I zoom out to 25% and everything on my artboard disappears. It's still there, just not visible. I did a little tinkering and it turns out the 27% and below has this effect.
I'm using CorelDaw X6 64-bit on Windows 7.
View 3 Replies
View Related
Apr 12, 2011
I have a partitioned mac that i am running windows 7 on. I've had no problems with corel and all of a sudden when I go to open the program it won't open past "Creating Application Environment" and I get an error message stating problem open corel.
I have tried the f8 thing, no luck, I have tried the uninstall reinstall, no luck, I've tried the run registry, no parasite.
View 1 Replies
View Related
Jun 12, 2012
When I park on a frame in the timeline, using the hotkey MarkOut places the outpoint 1 frame later in the sequence. The same thing happens when using the MarkOut button.
View 4 Replies
View Related
Mar 12, 2013
I am running AutoCAD Map 3D 2011. When i use the ID command to acquire x,y coordinates by snapping to an object, it gives me only one decimal place. When i do the command out in space, it gives me 4 decimal spaces. I need to get at least two decimal places while snapping to objects. Examples below:
id command (out in space, not using osnap)
X = 4006431.3366 Y = 359556.5635
id command (snapping to entity)
X = 4006252.3000 Y = 360712.5000
by the way, my units precision is set to .00 and it doesnt seem to make any difference with the id command.
View 4 Replies
View Related
Sep 26, 2012
I have used stringer connect in the past and it seemed that my traverse shots (which went to four decimal places 0.0000) that were in my raw file were converted to a fbk file and it held the decimal places. Now when I use it, the program rounds my shots to three decimal places (0.000) which changes the locations just slightly. I don't think I changed any settings deliberately. How can I get my four decimal places back?
View 3 Replies
View Related
Jan 17, 2013
My professor wants all of our dimensions to have 2 decimals places except for a few that he wants to have 3 decimal places. How do I change those few to have 3 places while everything else has 2?
View 1 Replies
View Related
Mar 20, 2013
I'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
View 3 Replies
View Related
May 21, 2013
Any good way to convert decimal values to fractions for use in inch measurements? I have a script that works great but it returns values like 5.5638 and I'd rather it return the closest fraction answer like 5 9/16. 1/16ths would be great, but I'd settle for 1/8ths.
I started trying to come up with a large if with lots of > and < conditions, but it might be better not to reinvent the wheel.
View 13 Replies
View Related
Jan 2, 2013
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
View 1 Replies
View Related
Sep 5, 2012
Why does the Round() function require that the number of decimal places be either a number or an object if you want to use a variable? It seems that a Single should work here, but iLogic won't accept it.
See sample code below which is rounding off dimension values. If I dim the variable "somenumber" as Single or Double, I get this error message from the Round() function: "Overload resolution failed because no accessible 'Round' can be called without a narrowing conversion."
When I dim "somenumber" as an object it works, but this seems unnecessary when all it is storing is a single digit number. Why wouldn't Single or Double work for this variable?
Here's the code snippet:
'Dim Current Sketch & Count Constraints
Dim oSketch As Sketch = ThisApplication.ActiveEditObject
Dim oDimCount As Single = oSketch.DimensionConstraints.Count
[Code]....
View 3 Replies
View Related
Mar 15, 2012
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
View 6 Replies
View Related
Sep 13, 2013
I have a couple of strange angles and moving parts going on in an assembly. there is 1 constraint i am happy for inventor to predict the offset for. the problem is I am using other constraints i later want to bin, to pin it in position then try to apply this constraint. it looks like the predict offset tick box only measures to 3 dp, so as soon as i apply this constraint my model goes sick. I have to take a measurment and copy and place the measurment with all dp's into the constraint to make it work.
Is there a setting to specify the predict offset number of decimal places?
View 4 Replies
View Related
May 7, 2012
The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
View 3 Replies
View Related
Jan 5, 2012
I work with ANGTOS and ANGTOF quite a bit. I'm working with latitude and longitude conversions in MAP 3D for an application where accuracy is top priority. Most of the time ANGTOS (and RTOS, for that matter) return an accurate result for the number if decimal places requested, but then I run into a situation like this:
Command:
(angtos (angtof "120.0") 1 16)
"119d59'59.999999999949""
I got it to return properly by specifying only 13 decimal places, but the result makes conversion between coordinate systems inaccurate.
View 1 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Jul 23, 2011
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
View 4 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 18, 2012
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
View 3 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
