I'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
I am running AutoCAD Map 3D 2011. When i use the ID command to acquire x,y coordinates by snapping to an object, it gives me only one decimal place. When i do the command out in space, it gives me 4 decimal spaces. I need to get at least two decimal places while snapping to objects. Examples below:
id command (out in space, not using osnap)
X = 4006431.3366 Y = 359556.5635
id command (snapping to entity)
X = 4006252.3000 Y = 360712.5000
by the way, my units precision is set to .00 and it doesnt seem to make any difference with the id command.
I have used stringer connect in the past and it seemed that my traverse shots (which went to four decimal places 0.0000) that were in my raw file were converted to a fbk file and it held the decimal places. Now when I use it, the program rounds my shots to three decimal places (0.000) which changes the locations just slightly. I don't think I changed any settings deliberately. How can I get my four decimal places back?
View 3 Replies View RelatedMy professor wants all of our dimensions to have 2 decimals places except for a few that he wants to have 3 decimal places. How do I change those few to have 3 places while everything else has 2?
View 1 Replies View RelatedWhy does the Round() function require that the number of decimal places be either a number or an object if you want to use a variable? It seems that a Single should work here, but iLogic won't accept it.
See sample code below which is rounding off dimension values. If I dim the variable "somenumber" as Single or Double, I get this error message from the Round() function: "Overload resolution failed because no accessible 'Round' can be called without a narrowing conversion."
When I dim "somenumber" as an object it works, but this seems unnecessary when all it is storing is a single digit number. Why wouldn't Single or Double work for this variable?
Here's the code snippet:
'Dim Current Sketch & Count Constraints
Dim oSketch As Sketch = ThisApplication.ActiveEditObject
Dim oDimCount As Single = oSketch.DimensionConstraints.Count
[Code]....
I was trying to use the guides to make a triangle and everything was fine until I used a third guide on one of the triangles points (2 guides; 1 at 90 degrees and 1 at 60 degrees). When I used the dimension tool on it to measure from the bottom of the page to that point, the measurement did not match the numbers in the 90 degree guide's info. It was like .0000007 or .00000007 inches off. I know that's not much but I really needed precision for my particular drawing and I dont know how to get more accurate measurements with the program rounding to the nearest 6th decimal place (the highest setting on drawing precision). If it says it's centered in the intersection, then why do I see a tiny micro right triangle when I zoom in?
View 2 Replies View RelatedI have a couple of strange angles and moving parts going on in an assembly. there is 1 constraint i am happy for inventor to predict the offset for. the problem is I am using other constraints i later want to bin, to pin it in position then try to apply this constraint. it looks like the predict offset tick box only measures to 3 dp, so as soon as i apply this constraint my model goes sick. I have to take a measurment and copy and place the measurment with all dp's into the constraint to make it work.
Is there a setting to specify the predict offset number of decimal places?
I work with ANGTOS and ANGTOF quite a bit. I'm working with latitude and longitude conversions in MAP 3D for an application where accuracy is top priority. Most of the time ANGTOS (and RTOS, for that matter) return an accurate result for the number if decimal places requested, but then I run into a situation like this:
Command:
(angtos (angtof "120.0") 1 16)
"119d59'59.999999999949""
I got it to return properly by specifying only 13 decimal places, but the result makes conversion between coordinate systems inaccurate.
I use the rotate tool to design gauges, like clocks, a lot. I hold the ALT button and click on the center of my drawing and then a window pops up to enter in what degree I want my object to be. Currently the decimal point only allows for hundredths, ex. 45.25 degrees. Is there any way to change this to thousandths or even higher, ex. 45.25125? I've attached a screenshot to show you what I mean.
View 3 Replies View RelatedI just moved Smoke from an office to my house. Have different IPs in both places. I understand that I need to change the IP on two places: the "hosts" file and on the license itself. Where can I find these files?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
How do I change the default font in Illustrator CC?
View 10 Replies View RelatedHow do you change the default typeface?
View 3 Replies View RelatedHow do you change the default typeface in Illustrator CS6?
View 11 Replies View RelatedIn CS6 how do you changes rulers to decimal inches
View 3 Replies View RelatedI have an AutoCAD map 3d 2014 .dwg with points that have object data and Easting, Northing and elevation values.
I am displaying the text of those points in particular the elevation value. This is done through task pane>data>add drawing layer>add style>text...
I hit the properties and select the Z1 from the object properties...
All is well and the text comes as e.g. 24.89752
The above number is accurate, however, I only want two or three decimal points since the number is too long.
Is there a way to reconfigure this so that the number is displayed as 24.89?
Illustrator edits photo in paint, instead photoshop. How can I to change default photo editor in illustrator cs5 ?
View 3 Replies View RelatedI open PDFs in Illustrator that were created in Autodesk Inventor. The default of Myriad Pro is applied and I would like to change that. I have made a new document profile and a new workspace, but the profile is only good for a new document. The workspace does not change the default type. I could save lots of time if I could change this behavior! I am working in CS6 on a 64-bit Windows machine.
Perhaps it is only a question of getting Illustrator to recognize Arial?
how do you change default font in illustrator cs4 on windows 7 operating system
View 3 Replies View RelatedEvery new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
This is probably a basic question, but in the control panel area, where it shows the measurements of an object created, the default measurement is in inches. Can I change that to display milmeters? I am aware that it can be changed in the rulers, but up where it says X, Y, then width and height, it shows inches. I want to view it in milimeters, because I am doing a project in milimeters. How do I do that?
View 8 Replies View RelatedThe default for the save as pdf is Acrobat 6. Problem just started of my artboards not translating correctly in the PDF. Preview of the document is also very strange. Saved PDF will open correctly in Ai, but not in anything else including Acrobat and Apple Preview. Changing the compatibility to 8 fixes problem.
I get that I can make a custom preset, action or script, but I really would like to just keep it simple if possible.
how and if i can change the default color model in illustrator (in the color panel), which is RGB to something else ? (i think colors in HSB and it's a bit annoying changing that every time) i looked it up and couldn't find out.
View 5 Replies View RelatedCan I change the default typeface in an Illustrator CC document? (I wouldn't use Meridian to win a bet.)
View 3 Replies View RelatedI'm on MAC OS 10.7.4, I'm using CS6 and I want to change the substitution font. But I don't want to do it manually to each line of text.. I have 2000 single page pdf files that use gotham font and I need to change 1 word. I do have gotham font by on my computer it's called gotham-htf. Same thing really.. but illustrator changes all the layout to myriad, and breaks it into 300 mini lines of text per file. I don't want to manually rechange everything 2000 times.
There's gotta be a way to set the default substitution font no?
When converting from LAB is it possible to change the default look up library from PANTONE Solid Coated to the Pantone+ Color Bridge Coated? Example: Set up a new job using all Pantone+ Color Bridge Coated. This creates all swatches as "Process Color" in CMYK Color Mode.
Client request is to have some Spot Colors.EXAMPLE: I take the "PANTONE 7408 CP" and rename it to "PANTONE 7408 C" change the color type to Spot Color and then close the window. Reopen the spot and change the Color Mode to book. All good now I have a PANTONE Solid Coated.
Client now decides to remove the Spot Color so I add the "P" back in the name and change the color mode back to CMYK.
Now the break is;
C: 2.49%, M: 25.93%, Y: 100%, K: 0%
NOT
C: 0%, M: 29%, Y: 100%, K: 0%
I open an older document from an unknown source. A warning pops up that I have no substitute for the font, which is Helvetica90ms-RKSJ-H. I go to the "change font" window but am unable to substitute this font for the one on my system, which is Adobe Helvetica. If I try change the character style options default, it defaults right back to Helvetica90ms-RKSJ-H. If I manually change each bit of text (there are dozens in each document, and 200 documents), then copy/paste the fonts into a new document, the new document becomes corrupted and I can no longer choose the font on my system (Adobe Helvetica).
I have even tried an interim method of copy/pasting, by copying to the Windows notepad. That should lose any and all formatting. But when I copy it back to the Illustrator document, it becomes corrupted with Helvetica90ms-RKSJ-H.
Screenshot provided where you can manually change it on an object, but I would like to change it so that the Top Left is selected by default. I'm a web developer, and just like the web all my designs origins are anchored to the top left.
View 2 Replies View RelatedI Would like to change the default Templates folder that opens when i click "New From Template". Is there a way of doing this?
View 2 Replies View Related