AutoCAD Inventor :: Scaling In Dimension After Saving From IDW To DWG
Nov 20, 2011
After I had done all on detail drawing and dimensioning in inventor 2010.idw, my customer want it in 2004.dwg format and they want all drawing to be in files and in model space..And here the problem I face:
1) Base drawing is 1:1 and detail drawing is 4:1, redo a dimension in base drawing is ok but in detail drawing re-dimension it show 4 times the size. I had tried using view port/ scale area still can't.
2) When copy and paste Drawing A to Drawing B the detail drawing fence run out of place and scale. What I do is right click and do a block editor.
Looking for good solution for the above problem during conversion of IDW to DWG.
View 2 Replies
ADVERTISEMENT
Nov 23, 2011
When I upload a drawing from the internet I save it as a wblock.when I insert it into my exixsting drawing it is not scaled to the same dimensions as the rest of the drawing.
I change the units to the same as the drawing befeore I save it as Wblock. But Im still having this Problem.
View 9 Replies
View Related
Dec 5, 2011
I have been working on a project and ran into some complications. I have an object that I would like to scale the length down, but leave the height and width as they are. I read around and found out I can use block and use that to scale the object. however, once I used block I was not able to use the Boolean operators to subtract from the newly scaled object. If I hold my mouse over the object, it is a called a block reference.
My question is, is there a way to change the y-dimension but still be able to play around with the object?
View 7 Replies
View Related
Mar 28, 2012
I have the same problem and want to scale only in one direction. Through the search I find out that the solution is block/insert and I use it.But what is my problem?, Dimension lines.
My drawing has dimension line and I want AutoCad to change the dimension value after inserting according to scale factor. How can I do this? At present after scaling in one direction, dimension value remains same as before scaling.
View 9 Replies
View Related
Oct 3, 2013
I am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.
View 1 Replies
View Related
Dec 15, 2013
When I have to scale something after bringing it in from another drawing (Windows copy, paste), usually (but strangely not always, it seems) the dimension text and arrows are all messed up. If I scale down, they are (obviously) way too big, up, and they are microscopic. How is this best avoided / dealt with? I imagine it is something with the DIMSTYLE not being copied over or something?
View 5 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Feb 9, 2012
I'm having an issue with dimensions changing from when I save the drawing to when I reopen it.
I'm using AutoCAD Mechanical 2009, exclusively in 2D. I save drawings in AutoCAD 2000/LT 2000 Drawing format to maintain backwards compatibility with our legacy documents which are still in regular use.
The exact process is:
1. Create dimension in existing drawing.
2. Set units of dimension. Typically this is fractional.
3. Save and close drawing.
4. Reopen drawing, and all of the dimensions units are set to decimal to the fourth decimal point.
If I interact with the dimension in any way, it will return to its set unit. For example, if I double click on it to bring up the Power Dimensioning window and just click Okay without altering anything, it will change back to its set unit. Likewise, if I move the dimension itself it will return to its set unit as well.
So far my solution has been to simply select the entire drawing at once, then move it X units one way, then X units back. The move back and forth will return all the dimensions to their set units.
Obviously this is not ideal, especially when sending drawings to co-workers who are unaware of the issue or even using different versions of AutoCAD.
View 8 Replies
View Related
Mar 6, 2013
I am shooting in RAW, then converting to DNG and the dimension of my photos is 3872 x 2592 (I guess thats always the same?)
Now I need to have a picture dimension of 3500px x 3500px and one 4600px x 3000px. How do I get there?
I assume resizing the photo in the export feature to that dimension is gonna decrease the quality?
View 8 Replies
View Related
Oct 26, 2012
How do I scale a 3D model that I have imported originally from a ".step" file (or really any 3D model). I have come from SolidWorks, and this was very easy to do. All of the help files indicate that I need access to the original sketch.
View 1 Replies
View Related
Oct 10, 2011
I am trying to print on a 3d printer and seem to have a bit of a scaling issue with inventor 2012. I saved the .stl file in the same units but still get a scaling issue. Under options when I save it shows a 1:1 scale as well as the correct units.
When printing a .stl file from another computer that has inventor 10 installed we do not have this issue. Seems to be something with the files from 2012.
View 7 Replies
View Related
Jan 28, 2013
I need to scale a part up by a ration on 2, but I'm not sure how?
View 2 Replies
View Related
Mar 2, 2011
In an assembly I'm working on, I need to place the same part multiple times, but I need this part to be a different scale each time. I'm working with Inventor 2010. Relatively new to the program.
View 3 Replies
View Related
May 26, 2011
Certain pieces from the content center, both things that I made and standard content, are coming into my drawings scaled wrong. Actually I don't think it's scale, because some rectangles are coming in as squares.
Everything looks great on the assembly, but they are wrong on the drawing. I've tried replacing from content center with no change.
.iam and resulting .idw. And one showing a wrong part and a correct part on an idw. The square on the left is supposed to be 2.25" square, which is what it measures to - but you can see that it isn't snapping to the actual geometry.
This is all stuff that has worked fine on previous versions of Inventor. I've had several instances of this so far since finally getting 2012 installed yesterday.
View 1 Replies
View Related
May 16, 2013
Is there any way to turn off the menu transparency of the right click menu? I find it highly annoying in drawings seeing hazy black lines behind text I am readingIs there any way to get inventor to work properly with windows dpi scaling? It is quite useful to have windows display text a skosh larger than normal but inventor is completely unusable with that option enabled. text on toolbars disappears and the zoom/pan/orbit goes from fluid to jumpy and useless.
View 2 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
Nov 26, 2012
I have a simple frame made of a 1/2 rod and have inserted a textured appearance of expanded metal. It is a guard.
I am not sure if the way i inserted the texture is correct, but it currently is scaled down to small. Have to scroll in lots to actually see the expanded metal.
Is there a better way to apply the texture than creating a surface? How can I adjust the scale of the texture?
Maybe applying a texture is not the best way to show that this guard is to have a section of expanded metal that will fit inside the 16x24 in guard? a note is not ideal in the drawing, but I suppose it is better than making an actual model of the expanded metal.
Part is attached below. Inventor 2013 Pro.
View 3 Replies
View Related
Jul 4, 2013
How do I add a dimension so that it shows both metric and imperial, with metric first, but has the appropriate units after each. Ie. 1.0mm (0.039 in.)?
View 2 Replies
View Related
Jun 2, 2011
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies
View Related
Feb 10, 2012
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
View 9 Replies
View Related
Dec 4, 2013
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies
View Related
May 15, 2012
I teach 8th grade tech and we use inventor I needed to display in fractions went to help menu. told me to go to styles & standards and then to styles editor as the help menu says and in the dialog box on the right is the browser it has in it color, lighting, & material. the help menu says there should be dimension to change the style to fraction but it not there.
View 9 Replies
View Related
Sep 21, 2011
How do you add text before a dimension in the idw environment? For example, I have a dimension that shows 40".... I want to add text before it to say something like.... " 8 Spaces at 5" = 40" ".... The 40 would be the default dimension value, everything else I want to add to the dimension... I have added tons of text information behind default dimension values, this is the first time I need to add the text before the value and cannot figure out how to get it to work...
Example:
oLinDim(3).Text.FormattedText = "8" &" SPC'S AT" & vbCrLf & "5 = "
this adds text after the default value of 40...
View 1 Replies
View Related
Nov 20, 2011
I would like to show such a dimension, like S1 in attachment. It is really value of tolerance of nominal 0 dimension.
View 2 Replies
View Related
Dec 21, 2011
How to Create a dimbreak like Autocad in Inventor idw
View 2 Replies
View Related
May 16, 2011
I was wondering if there is a good way to get the perpendicular distance from a face to a point in a model. I know that solidworks always shows a triangle when you use the dimesion tool so you don't always have just the diagonal dimension. I know this may be a little hard to understand so i've attached a picture of what I'm talking about
View 9 Replies
View Related
Jan 9, 2013
I created special dimension styles in Inventor 2013 in a drawing and trying to get them into another Inventor drawing. Can this be done like in Autocad by coping to the clip board and pasting into the new drawing?
View 2 Replies
View Related
Jun 7, 2013
I attached an IPT file that a customer sent us to manufacture for them.It's a rectangular aluminum tube with two bends.In the IDW when I try to place center points and dimension the radius it is not recognized.The original file was a STEP.
View 9 Replies
View Related
