I am trying to dimension a room in AutoCAD 2014, drawing in Architectual mode using the default template. I attached a screenshot of what I am seeing, the red lines are my dimensions but they show up with no text and I cannot figure out how to get the text to display.
View 5 Replies
I'm using different dimension styles for different scales on my drawing, however, if i change one dimension style text to a certain size, all of the others change too, is there something i'm doing wrong? I need every dimension style to be its own text size, but i'm having to manually change them every time.
View 4 Replies View RelatedOk it seems that I may be overlooking something simple. This is what I am currently dong. I have a detail sheet with several different scales. I want to use annotative dimensions and mleaders so I don't have to create the many dimstyles for different scales.
My set up:imagine a model space with 4 squares reprsenting 4 different scales. I start annotating in 1"=1'-0". Then I go to another detail at 3/4" = 1'-0". When I change my scale using that item in the lower right my annotations in the 1"=1'-0" also changes. I don't want it to change I want it to stay at 1"-0". How can I make it stay at 1'=1'-0" regardless of whatever other scale I have switched to?
When I am trying to dimension a room in AutoCAD 2014 the dimension looks like a solid rectangle, with no text. I am dring in Architectual mode using the default template.
View 4 Replies View RelatedI set a "limits" in my drawing(command "limits"-- "lower left corner is 0,0" --- upper right corner " is set as 20, 20--enter)
But then I moved my mouse horizontally and vertically on the screen, and found that the coordinate value at the bottom was from -25 on the left to 18 on the right, and from 0 at the bottom to 15 at the top. I am confused about what on earth does that limit? should it be 20 in length and 20 in width?
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedI have two windows that are above my cut plane (far above) but still insists on displaying in plan view. This of course ruins my plan drawing so I need to fix it. I have tried several different 'Object Display' options but none have worked so far.
I don't understand - I thought default was for them not to disappear when above cut plane?
When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
Autocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies View RelatedI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View RelatedI have a .shx font from our state DOT that I need to include on my sheets. The problem is on some drawings it is filled (like I want) and on others it is open (which is bad). The text is located in the layout tab. I've tried all of the following regular fixes with no luck:
Set the FILL command to on.
Set the FILLMODE system variable to 1.
Set the TEXTFILL system variable to 1.
In the Plot dialog box, clear Hide Objects.
Turn off the Hideplot property of the viewport.
I am guessing the problem is drawing specific bacuause I can copy the text back and forth between good and bad drawings and the fill comes and goes.
The same text object in 2 different drawings.
I also exported my system variables from the good and bad drawings and compared the two and none of the variables that matter were different.
I would just copy the drawings over into my good template and be done with it, but I have a large number of files that were created around the office that now have outlined text and don't have the time to monkey around copying all the drawings over to the good template. I know the long term solution is to get people to do things right in the first place, but in the mean time I'm hoping to be able to just change a variable and have the text be filled.
If I click on any text the docker shows the incorrect height of the text. I have typed in an measured a 4" H and the docker display tell me its over 5.5".
View 13 Replies View RelatedI have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course.
View 2 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I am trying to use our standard room name block in two new files from a client but it is not showing up the way it is supposed to. It looks like a totally different font. I have checked the text options box and it says it's "romans", just like it is supposed to, but it does not look right. It also does it with regular mtext that I copy in from another file. Once I change it back it looks right, but when I pull it in, it defaults to Romans and @arialunicode MS. I'm assuminng that's what the block is doing as well, but how do I fix that?
View 5 Replies View RelatedAs you see in the picture, the word Kitchen appears fine but the red line is where the dimension of the table top is supposed to be. It should show 6999.820mm or something , but it just displays a red line.
I just started learning AutoCAD 2010 through some videos and I came across this problem, how to rectify.
I changed my Units to mm, changed it before drawing.
The PC (running XP PRO 32bit) in question is at a middle school, so I'm sure someone was playing with settings, but I cannot find what they changed. underneath each screen icon that should say INVENTOR STUDIO, APPLICATION OPTIONS, SHEETMETAL, MODEL, etc. etc...all that shows is boxes; it's like they've either changed the language for the app to chinese (or other unsupported/unloaded in our OS) or some system font is haywire, but this only is affecting Inventor 2011 so far so I believe they changed a setting in the app. Once I get into a menu option; the text for each tab is correctly displayed. Where would one set the text/font for all icons in the Inventor 2011 interface?
View 2 Replies View RelatedI'd like to apply a property set to a dimension, tag it, and have the tag display the dimension value. This tag would be remote from the dimension, and on a separate layer, which would remain on when the dimension layer is frozen.
At present, the property set for dimensions appears not to include the dimension value.
I am using AutoCAD 2010 and when i go to print my design to PDF or even to a printer, the dimension lines do not show up. I have checked my layers and the dimension lines are not on defpoints, in fact they are on layer 0. I have tried to create a new layer and it still does not show up in the work space, let alone when i try to print it.
View 1 Replies View RelatedI am having an issue with the obliques in one of my drawing files. They are set to be 1/8" but are very small to the point you cant even see them. However, I have the same settings in another drawing file and they are the correct size. I have compared all the settings of the drawings that I can think of but still can't find an answer. It seems to be a scale issue but my scales from dwg file to dwg file seem to be the same.
View 1 Replies View RelatedCan I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies View RelatedI am trying to override a dimension to provide a +/- at the end of one ACA dimension. I added the override, but it is not showing up - even after a regeneration...
View 2 Replies View RelatedI seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
View 9 Replies View RelatedI have a file that the architectural tick marks are not solid. They are an outline of a rectangle.
fillmode =1
shademode = 2dwireframe
options/display = solid fill is checked.
I am on ACA2011. It does not matter if I am in model or a viewport. It is the same.
I have another file open and that dim ticks are filled.
I have imported the dim string into the one that does not work and still nothing.
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedI edited some video for my daughter's drama class and burned a disk for her. When my daughter presented for the class on her teacher's computer there was text covering the video that seemingly had nothing to do with the video. I can't reproduce it and I don't even know what kind of system the teacher uses, but is there some trick to burning a disk so that it displays the same on anything and everything?
View 1 Replies View Related
