I have two windows that are above my cut plane (far above) but still insists on displaying in plan view. This of course ruins my plan drawing so I need to fix it. I have tried several different 'Object Display' options but none have worked so far.
I don't understand - I thought default was for them not to disappear when above cut plane?
I am trying to dimension a room in AutoCAD 2014, drawing in Architectual mode using the default template. I attached a screenshot of what I am seeing, the red lines are my dimensions but they show up with no text and I cannot figure out how to get the text to display.
View 5 Replies View RelatedWhen I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
Autocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies View RelatedI've got the second floor of a building which is an attic, which is over 2 different levels, each of which has its own xref. The roof is sloped. I would like to vary the cut plane in the same view, so that both xrefs are respectively cut at 1500mm above floor level. This would mean using 2 different cut planes, one for each reference.
View 1 Replies View RelatedI like to attach a .aim or import a inventor DWG into a section and a plan in autocad.
But how do I select the right orientation on import? The default Inventor view is a sideview and won't work on a plan.
Right now it seems like I either have to go into 3D model view and rotate the object or have to change the orientation Inventor for plan and then reorientate it for section...
when working with a 3d model i want to switch between front, top, side views to change my XYZ axis. when i hit the view icon(whichever i am going to) it regenerates and zooms extents. is there w way to stay zoomed into the current location but toggle the crosshair XYZ plane?
View 1 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedAA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
Do I need to modify the CUI?
In AutoCAD Architecture 2012: when we insert standard windows in the wall, we usually get a wall break. After changing window size to small (2’ high), this wall break disappears in the plan, but still have it on isometric or perspective view.
View 1 Replies View RelatedI tried to load/insert a specific window style through use of the design palette but couldn't find the right type within the generic window styles that came with the software. I needed an 8 Blade x 150 glass Louvre Blades Window with a few standard openings currently used in our industry. In fact I needed to design several standards of these which I did but saved them as blocks with the dwg extensions.
In fact I really desire a way to design one that would be possible to be integrated into the styles drawing in the default location (C:/Program Data/Autodesk/ACA 2013/enu/Styles/Metric/Window Styles (Metric).dwg.
I understand that these default styles can easily be loaded into design palettes, entered into constructed walls and modified to certain specs in the appropriate dialogue boxes.
Why would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?
Sometimes when we place a window in a wall we can grab the grip and stretch it to any size we want. Other times the only sizes we can use are the standard sizes. I know how to add a standard size but how can we make it to where you can just strectch it to any size we want?
View 4 Replies View RelatedIn AutoCAD Architecture 2012, is it possible to change the 3D window block from standard white color to another?
View 6 Replies View RelatedI am having a lag problem when quickly zooming in or using the selection window quickly. When quickly picking a window from left to right the first pick point lags and I would select some thing else. Iam using Cad 2012. Is there a command setting that has changed from Cad 2011 to 2012 ??
View 1 Replies View RelatedHow to reposition window within wall? i have a window put into my basement wall with footing as shown. unfortunately, the window aligns on the symmetry line of footing itself (as i believe the footing is taken as the overall wall thickness). i want the window to be aligned on the wall/cavity thickness only.
i prefer to have it default in this window or wall style rather than playing around with anchors and other ,,reposition tools'' for each and single window in my basement plan.
I opened a view drawing where I had placed the window tags and many of them had moved either X or Y from where they had been placed. When I say moved, I don't mean a little. Some of them moved 540 FEET! What would cause that?
View 1 Replies View RelatedI'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1
Intel i7 hex 3.0
16 gb ram
Nvidia Quadro 4000
ACA 2012: Is it possible to add a column to my door and window schedules that automatically shows the area of the door/window(or area of Glazing) and then have a total area column at the bottom of the column?
View 3 Replies View RelatedHow do I set a Window Assembly to be flush to the outside of a Wall? I'm expecting an embarrassingly simple answer, but I really cannot figure this. the infills and the mullions move out 7-1/16", but the two frame elements just will not be moved.
View 1 Replies View RelatedI am trying to add a window vent to my roof slab, I'm using autocad architecture 2013.
View 2 Replies View RelatedI have Architecture 2009 and my computer needed to have my profile rebuilt. Now I am unable to tile my acad drawing horizontally or verically like I used too. I tried to rebuilt the file and reinstall but that doesn't seem to work. Also rather than opening at least 2 drawing (or more) now results in seperate sessions rather than 1 session with 2 or more files. What the setting is that I need to update?
View 5 Replies View RelatedIf a window is tagged and the window is moved, then the tag moves also. Is it possible to keep the link to the property set information but make it so the tag does not move if the window is moved?
View 5 Replies View RelatedAll my layers are turned on, when in an existing drawing my schedules do not appear when I use the tool to create them. When I open a new drawing draw a wall and a couple doors, the schedule inserts when I use the annotate tool. I am only using a basic floor plan at the moment, no xrefs or anything else, simple walls and doors and inserted from the program. I did use tags for the doors and windows which worked fine.
View 4 Replies View Relatedwe just recently went from 2008 to 2010 Autocad Architecture. the windows from a 2008 file had the windows in the smart walls and would trim the wall... however, i opened the file in 2010 and all the windows are showing up, but not trimming the smart wall.
View 9 Replies View RelatedI use ACA 2012 for residential design - I have a wall style, 2x4 stud w/ 1.5" airspace and 3.5" brick (modified from the stock styles) - but whenever I insert a window, it makes it as wide as the wall (9") when it should be only the depth of the stud wall (2x4 or 2x6) - How can I fix this?
View 7 Replies View RelatedMostly I create door/window assemblies from an elevation sketch. I make sure that the DW tool on the tool palette has all the attributes I want for the new DW. Problem is that most times the attributes do not travel across to the new DW. I have a double hinged frameless door that I want as an override assignment.
And although the infill panel style has been defined in the DW style, when I use the infill panel override assignment, the double door style is not available from the drop down box. I have copied and assigned the DW to a new style, saved - closed - opened the drawing, but the double door style is still not available in the drop down box.
I am having a nagging problem related to window and door cleanups in walls. Certain walls seem to lose the opening for a window or door. Sometimes, disconnecting a wall from another at a T or L insection clears the problem, but when they meet again, the all openings in that wall disappear. It looks fine in plan view, but 3d aspects of the wall are affected. This problem is also inconsistant. Quite frustrating. I've a attached a series of jpegs that illustrate a current issue.
View 1 Replies View RelatedI created a dog leg laundry door and window and finally got it to work but when I open the door the window pane moves with the door, also the window does not show up in the plan view. The cut plan is set at 1400 and the window sill is at 1200.
Have a look at the dwg file
Is there a way to create a window that slides into a pocket in a wall the way a pocket door does?
(I'd define a pocket door style for it but I'd like it to appear as a window for tags and schedules.)