I've got the second floor of a building which is an attic, which is over 2 different levels, each of which has its own xref. The roof is sloped. I would like to vary the cut plane in the same view, so that both xrefs are respectively cut at 1500mm above floor level. This would mean using 2 different cut planes, one for each reference.
View 1 RepliesWe are using ACA2010 and use the project navigator to bring constructs into views then bring the views into sheets, which has been working great, but in the last few months we have gone to a sheet only to find that the view no longer contains the constructs. I was working on a project on Friday and the Site Plan view no longer had the site xrefed into it which I fixed, now today the Site Plan is fine but the Roof Plan is empty. This is not the 1st project this has happened to but it is the 1st time it has happened to me so I know nobody changed something they should not have. Is there a known bug in 2010 or something I should check. I don't want this to happen to the Floor Plan if it does I will lose all my dimensions.
View 2 Replies View RelatedIf we have both the Xref and the File that it is referenced into open on one of the computers here and we reload, the Xref disappears. If we do an undo and close the Xref it reloads without problem.
I tried to replace the user profile from another PC that doesn’t have the problem, but it didn’t work. Is there a Registry setting that cause this behavior? All stations set to “Enabled with copy”
AutoCAD 2012 Arch.
I have an xrefernced drg , which i print from a layout/paperspace .I freeze certain layers using VPort freeze in layer properties and save the drg whenever i close and reopen the drawing the layers are thawed in the viewport again.
View 2 Replies View Relatedfew of our systems are not loading the xrefs automatically. it show as UNRESOLVED until reload it manually. also this systems are not able to attach / overlay xrefs as relative path.
View 7 Replies View RelatedI'm using Autocad 2013. My problem is when i use "recover files & xrefs", all the files recovered are saved as a 2013 dwg version. As we all save our files here as 2007 version so when others opened the files they are getting some of the xref files missing in the drawing.
Is there any option to save files in a lower version when i recover?
I've recently run into a problem that involves xrefs. Basically, I cannot open files that are being xrefed in other drawings when those drawings are currently open. AutoCAD Architecture will only allow me to open the xrefed file as a read-only version. For example:
I have 1ST FLOOR PLAN (drawing file) xrefed into A-201.00 FIRST FLOOR PLAN (sheet file). If one of my team members has the sheet file open with the drawing file loaded, then AutoCAD will only let me open the drawing file as a read-only file. But if my team member has the sheet file open with the drawing file unloaded, then I can open the drawing file without any problems.
I have never had this type of problem with xrefs before and so I'm wondering if it's an AutoCAD Architecture 2012 bug.
What is the best method to re-path x-refs in a project whose folder has been moved. We are talking about 60-100 x-refs here.The originals were created in ACA 2009 and were not pathed relatively; nor was Project Navigator used. We are currently using ACA 2014.
View 1 Replies View RelatedWhen an object in an XRef is tagged (and the object has an object based PSD) the tag will not update to reflect changes made in the XRef.
This can be fixed in the XRef by running the PropertyDataBrowser command and unticking the Overrides (shown in the leftmost tickbox when two tick boxes present).
Any automatic way to keep the tags up to date? I have attached my VB.Net code attempt for this. It almost works BUT the MultiViewBlock Overrides are ReadOnly.
Our office recently moved all of our project files to the dropbox. Now when I open files with xrefs I have to attach them back into the file. However, this doesn't happen for my coworker. She can see all the xrefs. How could I solve this? The file names or directory has not changed.
View 2 Replies View RelatedUsing ACA 2012 and Windows 7 Pro x64. I have a drawing with two viewports. In one I'm showing the electrical layers and the base floor plan. In the other I'm showing casework and the base floor plan. All of the layers are contained in one xref so some are frozen in each viewport. When I bind that xref using the insert method (bindtype=1) some of the electrical layers show in the casework plan. I've tried everything I know of but I can't figure out how to surpress this behavior. If I use bindtype=0 the problem goes away but I end up with ugly layer names.
View 1 Replies View RelatedI am having several problems with my xrefs. My two big problems are xrefs bringing in way more information than I want, and they are duplicating if they are selected, even when I have the xref layers locked.
My set up is this:
I have a plan file, a grid line file, an elevation file, and a section file.
I want all files to be referenced to each other. However, I do not want duplicates of any xref. For instance, in my section drawing, I will reference my plan file which consequently brings in any file that is referenced in the plan file. I know that I will get the circular reference warning and that I can click continue. However, is there any way I can just get "1 degree of nesting"?
Second, I cannot figure out how to lock my xrefs to prevent them from constantly being selected. My problem is that in my live drawing information, if I select everything within my window and an xref is in that window, it will be copied. I don't ever want to duplicate my xrefs, but I can't find a way to lock them (even when locking xref layers).
I have two windows that are above my cut plane (far above) but still insists on displaying in plan view. This of course ruins my plan drawing so I need to fix it. I have tried several different 'Object Display' options but none have worked so far.
I don't understand - I thought default was for them not to disappear when above cut plane?
I like to attach a .aim or import a inventor DWG into a section and a plan in autocad.
But how do I select the right orientation on import? The default Inventor view is a sideview and won't work on a plan.
Right now it seems like I either have to go into 3D model view and rotate the object or have to change the orientation Inventor for plan and then reorientate it for section...
i have a large number of drawings that need xrefs detached and re-attached with the latest model xrefs, any way to do them in bulk rather than opening each individual drawing? the problem started a while back, when opening drawings, ACAD is not loading the latest 'saved' model when opening drawings...
View 5 Replies View Relatedwhen working with a 3d model i want to switch between front, top, side views to change my XYZ axis. when i hit the view icon(whichever i am going to) it regenerates and zooms extents. is there w way to stay zoomed into the current location but toggle the crosshair XYZ plane?
View 1 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI am having an issue with adding xrefs to drawings. The way I have this setup is the user inputs information and the number of sheets. This then sets up a sheet set with the information and then for each value for the number of sheets the user gets a dialog askign for a number, name, and description for that sheet.
so if the user puts in 5 as the number of sheets, the user gets that dialog 5 times.
also I have a dialog that asks the user if they are adding xrefs to the sheets, if they answer yes then it adds the xrefs to each sheet that is created (this is where I have an issue).
This works perfect for the first sheet that is added, how ever after you fill in the information and submit for the second sheet autocad gives a fatal exception error and closes. not sure if I am missing on turning something off, closing, or stoping something before the next sheet is created.
here is the code I have at this point:
'checks to see if the dialog was yes
If xrefd.DialogResult = Windows.Forms.DialogResult.Yes Then 'shows the dialog efd.ShowDialog() 'shows the dialog pfd.ShowDialog() 'runs for each value in total sheets
For i As Integer = 1 To info.TotalSheetNum.Value 'shows the dialog sheetinfo.ShowDialog() 'checks to see if the sheet number is 1 If sheetinfo.SheetNum.Text = "1"
Then 'sets the sheet set default values SetSheetSetDefaults(ssdb, info.NameTxt.Text,
"Description",
[Code]....
I am working on a drawings with nested xrefs and am experiencing major delays when selecting objects using crossing windows. It is as if the computer thinks I am selelecting the xref even though the curser doesn't touch any visible exref entities. Basically, I click to start the window and the curser freezes for 10 to 20 seconds. I am experiencing the same problem with other commands (intermittenly) such as move, line, and offset. The exrefs are on a separate locked layer and have been moved to the back of the drawing.
View 2 Replies View RelatedWhen I create a set of sheets from an alignment and I specify my data references etc, I want to create individual drawings for each sheet. The problem is that whenever I do this, it does not export also the base XREFs for the model drawing. I keep getting an error saying - Cannot create XREF's.
View 1 Replies View RelatedI am working on a rather big xref setup. The MAIN file has got about 10 OVERVIEW files refferenced in, each of the OVERVIEW files got another 15-20 DRAWING files attached.
Now when i attach OVERVIEW to MAIN it brings in all the DRAWINGS as unique xrefs as well.
Of course i want to see the DRAWNIGS in the MAIN file, but I'd prefer not to see them in the xref-manger (where i want to see only the OVERVIEW files).
An additional problem is that the DRAWINGS contain pictures on layout-tabs which are also shown in the MAIN file xref manager.
So long story short: is there a possibility to "hide" the sub-xrefs in the xref-manager?
Many times when I try to attach a xref and do a zoom extents, I cannot find the drawing. I change my limits to -999999,-999999 and 999999,999999 but still nothing. This seems to be a random problem.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
it's just somehow Xref drawing doesn't appear in layout/sheet space.
View 8 Replies View RelatedWe setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
Every time I reload the xref, regenerating the drawing or plot my details, I need to wait a long while. I have a plan (dwg) and the details (dwg) where I xrefed the plan 6 times. Everything is purged and audited. i thought this is a good way to work. Some tips how to manage with xrefs.
View 3 Replies View RelatedIs there a way to make the x-ref's a little less faded?
View 5 Replies View RelatedFor a project we are currently working on all files are stored on projectwise, all xrefs run through projectwise, so essentially whatever changes are made are immediately avaliable to everyone working on the job. This is great and all, but, one of the companies dwgs have an average of 11,000 + annotation scales. And those dwgs are referenced into ours. Usually in a situation like this we would just get rid of the annotation scales in the original, but since its run through projectwise every time they open and close one of these dwgs it over rides any changes we made (like getting rid of the annotation scales) We dont use annotation scales and i never have, is 11,000+ alot of annotation scales or is that normal? half the time i open the dwgs with these xrefed in it crashes autocad or takes forever.
View 7 Replies View RelatedOver the break management has decided to change the way our files are named and pathed.
This has messed everything up with the ex-refs in CAD. Is there a way to change that saved paths for the ex-refs and reload, or do I have to start from scratch?
If I have several hundred drawings, For example;
Drawing1.dwg
Drawing2.dwg
Drawing3.dwg
..etc..
and several hundred Xrefs;
XCdrg1.dwg
XCdrg2.dwg
XCdrg3.dwg
..etc...
Now, I need to do the following;
attach XCdrg1.dwg to Drawing1.dwg
attach XCdrg2.dwg to Drawing2.dwg
attach XCdrg3.dwg to Drawing3.dwg
..etc...
What is the quickest method? Script? (I have approximately 800 drawings and 800 xrefs and for CAD management reasons they need to be individual drawing files)
We are 3 ppl working on a project and facing this problem that when we open a file with xrefs, they lose their paths. Even when we fix it once, the next time someone else opens in their computer its lost again.
View 0 Replies View RelatedI have a drawing with an x-ref in it. The x-ref contains multiple layers which, since creating it have purged out of the x-ref. However when i purge the drawing in which the x-ref is in the layers do not remove. Is there a way to remove these?
View 1 Replies View Related