i have a large number of drawings that need xrefs detached and re-attached with the latest model xrefs, any way to do them in bulk rather than opening each individual drawing? the problem started a while back, when opening drawings, ACAD is not loading the latest 'saved' model when opening drawings...
View 5 RepliesOur office recently moved all of our project files to the dropbox. Now when I open files with xrefs I have to attach them back into the file. However, this doesn't happen for my coworker. She can see all the xrefs. How could I solve this? The file names or directory has not changed.
View 2 Replies View Relatedhave attached xref and reconciled it in my .dwg, but can't find it anywhere in the Model Space (looking closely for spots).
double-click and can't find.
not in Paper Space either...
I've got a 3D structural model I'm building and will insert 3D mechanical models that I have previously made. I just xref'd the client survey in such that 0,0,0 on my structural model lines up my drawing with the survey.
However, even with the xref frozen and off, when I go Zoom Extents, I zoom to the extent of the xref when I'd prefer to zoom to the extent of my live drawing. I've xclip'd the reference to only include an area slightly larger than the live dwg I'm working on, but no dice.
I think it's functioning correctly, so how do I do a zoom that takes me to the extent of my live dwg and ignores the size of the xref under it?
Is it possible to edit xrefs so that the xref layers correspond to your base model space layering? In other words, when you do an xref edit in your base drawing (not separate xref file) the layering will react to your edits using base plan layering? I use on screen layer tool bars and xref layers are on a separate layer and do not respond to these toolbar.
View 1 Replies View RelatedAny code that will select all xrefs in modelspace and bind (insert) them?
the -xref bind command requires explicit names and if I use * it will also bind my titleblock xref in paperspace which I want to avoid.
I am having an issue with adding xrefs to drawings. The way I have this setup is the user inputs information and the number of sheets. This then sets up a sheet set with the information and then for each value for the number of sheets the user gets a dialog askign for a number, name, and description for that sheet.
so if the user puts in 5 as the number of sheets, the user gets that dialog 5 times.
also I have a dialog that asks the user if they are adding xrefs to the sheets, if they answer yes then it adds the xrefs to each sheet that is created (this is where I have an issue).
This works perfect for the first sheet that is added, how ever after you fill in the information and submit for the second sheet autocad gives a fatal exception error and closes. not sure if I am missing on turning something off, closing, or stoping something before the next sheet is created.
here is the code I have at this point:
'checks to see if the dialog was yes
If xrefd.DialogResult = Windows.Forms.DialogResult.Yes Then 'shows the dialog efd.ShowDialog() 'shows the dialog pfd.ShowDialog() 'runs for each value in total sheets
For i As Integer = 1 To info.TotalSheetNum.Value 'shows the dialog sheetinfo.ShowDialog() 'checks to see if the sheet number is 1 If sheetinfo.SheetNum.Text = "1"
Then 'sets the sheet set default values SetSheetSetDefaults(ssdb, info.NameTxt.Text,
"Description",
[Code]....
I am working on a drawings with nested xrefs and am experiencing major delays when selecting objects using crossing windows. It is as if the computer thinks I am selelecting the xref even though the curser doesn't touch any visible exref entities. Basically, I click to start the window and the curser freezes for 10 to 20 seconds. I am experiencing the same problem with other commands (intermittenly) such as move, line, and offset. The exrefs are on a separate locked layer and have been moved to the back of the drawing.
View 2 Replies View RelatedWhen I create a set of sheets from an alignment and I specify my data references etc, I want to create individual drawings for each sheet. The problem is that whenever I do this, it does not export also the base XREFs for the model drawing. I keep getting an error saying - Cannot create XREF's.
View 1 Replies View RelatedI am working on a rather big xref setup. The MAIN file has got about 10 OVERVIEW files refferenced in, each of the OVERVIEW files got another 15-20 DRAWING files attached.
Now when i attach OVERVIEW to MAIN it brings in all the DRAWINGS as unique xrefs as well.
Of course i want to see the DRAWNIGS in the MAIN file, but I'd prefer not to see them in the xref-manger (where i want to see only the OVERVIEW files).
An additional problem is that the DRAWINGS contain pictures on layout-tabs which are also shown in the MAIN file xref manager.
So long story short: is there a possibility to "hide" the sub-xrefs in the xref-manager?
I've got the second floor of a building which is an attic, which is over 2 different levels, each of which has its own xref. The roof is sloped. I would like to vary the cut plane in the same view, so that both xrefs are respectively cut at 1500mm above floor level. This would mean using 2 different cut planes, one for each reference.
View 1 Replies View RelatedMany times when I try to attach a xref and do a zoom extents, I cannot find the drawing. I change my limits to -999999,-999999 and 999999,999999 but still nothing. This seems to be a random problem.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
it's just somehow Xref drawing doesn't appear in layout/sheet space.
View 8 Replies View RelatedWe setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
Every time I reload the xref, regenerating the drawing or plot my details, I need to wait a long while. I have a plan (dwg) and the details (dwg) where I xrefed the plan 6 times. Everything is purged and audited. i thought this is a good way to work. Some tips how to manage with xrefs.
View 3 Replies View RelatedIs there a way to make the x-ref's a little less faded?
View 5 Replies View RelatedFor a project we are currently working on all files are stored on projectwise, all xrefs run through projectwise, so essentially whatever changes are made are immediately avaliable to everyone working on the job. This is great and all, but, one of the companies dwgs have an average of 11,000 + annotation scales. And those dwgs are referenced into ours. Usually in a situation like this we would just get rid of the annotation scales in the original, but since its run through projectwise every time they open and close one of these dwgs it over rides any changes we made (like getting rid of the annotation scales) We dont use annotation scales and i never have, is 11,000+ alot of annotation scales or is that normal? half the time i open the dwgs with these xrefed in it crashes autocad or takes forever.
View 7 Replies View RelatedOver the break management has decided to change the way our files are named and pathed.
This has messed everything up with the ex-refs in CAD. Is there a way to change that saved paths for the ex-refs and reload, or do I have to start from scratch?
If I have several hundred drawings, For example;
Drawing1.dwg
Drawing2.dwg
Drawing3.dwg
..etc..
and several hundred Xrefs;
XCdrg1.dwg
XCdrg2.dwg
XCdrg3.dwg
..etc...
Now, I need to do the following;
attach XCdrg1.dwg to Drawing1.dwg
attach XCdrg2.dwg to Drawing2.dwg
attach XCdrg3.dwg to Drawing3.dwg
..etc...
What is the quickest method? Script? (I have approximately 800 drawings and 800 xrefs and for CAD management reasons they need to be individual drawing files)
We are 3 ppl working on a project and facing this problem that when we open a file with xrefs, they lose their paths. Even when we fix it once, the next time someone else opens in their computer its lost again.
View 0 Replies View RelatedI have a drawing with an x-ref in it. The x-ref contains multiple layers which, since creating it have purged out of the x-ref. However when i purge the drawing in which the x-ref is in the layers do not remove. Is there a way to remove these?
View 1 Replies View RelatedI have been sent some drawings with came in 2 zip files. 1 zip contains the floorplans. the other contains the sheets.
if i load the sheet, it will tell me the drawing is missing in a pop up box with a status of "not found". i f i try to attach it nothing happens.
Program: Civil3D 2010
Upon binding my dwgs to send to clients, sometimes I run across a serious problem. My xref'ed site plans disappear but my xref manager still lists it as attached, the layer manager still has every xrefed layer, and all other xrefs in the dwg will bind perfectly.
I have broken down all complex objects, purged, audited, cleaned up any excess scales, and even created new fresh dwgs for the xref and the drawing in question; all actions have ended in failure. I have even searched the AutoDesk forums for a solution and have found nothing substantial.
Solution: #1 Use RECOVERALL command on .dwg file that the xrefs disappear from. It will remove all proxy objects and excess scales in the file that is causing it to disappear in the first place.
#2 WBLOCK out the dwg file and any xrefs that are disappearing and insert them into new "clean" .dwg files. Must be done to all files.
I can't load some xrefs in 2013 that I can with 2012. Identical new machines within the last week.
I get an invalid message for some not all. Is it the 2013 jinx?
Any settings that will automatically check changes to an xref and re-load it instead of just telling you "an xref needs reloading"? the problem is occuring when i go to publish and i end up with out-dated info because acad doesn't auto-refresh the xrefs.
View 7 Replies View RelatedWhen I work with a drawing that have several XRefs, it is too slow to open, save, or to do everything. I configured:
SAVEFIDELITY=0, XLOADCTL=2, INDEXCTL=3
Is there any other way to improve the performance?
I have 4 plans of the a building in separate files, all set to world ucs. I xref in ground floor to the first floor, then move the first floorr so it aligns. I complete the same process for plant room and roof. Having saved all the files I then xref back the first floor into the ground floor using the insertion point as 0,0,0 but the plans do not align???!!! I do the same for the other plans, the plant room plan aligns with ground floor whilst the roof plan aligns with fist floor [but not ground].
I have tried reinserting numerous times but am missing something? The files were supplied to us as dwg format but I do not know the full history.
I regularly recieve files from Architects and of course they have several xrefs. I have all of particular files that are referenced, however i cannot open the main file and have them load in 2013. I also cannot click reload or even detach and then reattach them. Nothing happens. However if i open the file in 2012 it opens just fine then i can bind everything into one. is there a setting i need to change?
View 1 Replies View RelatedScript to detach all xrefs?
View 6 Replies View RelatedI have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
We are using ACA2010 and use the project navigator to bring constructs into views then bring the views into sheets, which has been working great, but in the last few months we have gone to a sheet only to find that the view no longer contains the constructs. I was working on a project on Friday and the Site Plan view no longer had the site xrefed into it which I fixed, now today the Site Plan is fine but the Roof Plan is empty. This is not the 1st project this has happened to but it is the 1st time it has happened to me so I know nobody changed something they should not have. Is there a known bug in 2010 or something I should check. I don't want this to happen to the Floor Plan if it does I will lose all my dimensions.
View 2 Replies View Related