When I work with a drawing that have several XRefs, it is too slow to open, save, or to do everything. I configured:
SAVEFIDELITY=0, XLOADCTL=2, INDEXCTL=3
Is there any other way to improve the performance?
I have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
We prefer to detach all xrefs when exiting a base file instead of unloading them. Is there a way to have autocad remember which xrefs were used in the base file so that they can be reloaded all at once next time.
View 4 Replies View RelatedI have files that contain only XREFs, some have up to 20. When I try to use etransmit to share these files, the paths are still looking for the network and not the contents of the zip file.They are all Overlays Full path
I swear that it worked before but I cannot replicate it.I cannot share the zipped file with anyone not connected to our network as all references are lost.
My file has over 100 layers and 20,000 containers that are in 3D. It worked fine when I drew them. After I closed the file, it always takes 5 to 10 min to open. I can't delete a layer (layer2) or rotate angle of view or any normal command such as purge and audit.., it always crashes.
I was wondering that if I did anything wrong casued this, and that whether my approach of drawing these is correct, performace wise.. and what would be the better way of doing this..because my drawing is now uesless I can't even rotate it in vp ro do anything...
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies View RelatedWe setup a company template to use STB. Not trying to debate if its the right move, we simply did it because the designers grasped the concept of Named Styles rather than color styles.
Here is our setup.
AutoCAD 13 on Windows 7 with Adobe PDF or DWG to PDF
We have an xref'ed drawing of a background. We xref it on Layer XXX_BKGRD with a color of yellow and a Plot Style of Background.
In our STB file we have style named Background set to plot Black. We have Plot object lineweights and plot with plot styles selected. The VP is set to Legacy Hidden.
When we do a plot preview, its all color. No change.
I can't load some xrefs in 2013 that I can with 2012. Identical new machines within the last week.
I get an invalid message for some not all. Is it the 2013 jinx?
I have 4 plans of the a building in separate files, all set to world ucs. I xref in ground floor to the first floor, then move the first floorr so it aligns. I complete the same process for plant room and roof. Having saved all the files I then xref back the first floor into the ground floor using the insertion point as 0,0,0 but the plans do not align???!!! I do the same for the other plans, the plant room plan aligns with ground floor whilst the roof plan aligns with fist floor [but not ground].
I have tried reinserting numerous times but am missing something? The files were supplied to us as dwg format but I do not know the full history.
I regularly recieve files from Architects and of course they have several xrefs. I have all of particular files that are referenced, however i cannot open the main file and have them load in 2013. I also cannot click reload or even detach and then reattach them. Nothing happens. However if i open the file in 2012 it opens just fine then i can bind everything into one. is there a setting i need to change?
View 1 Replies View RelatedScript to detach all xrefs?
View 6 Replies View Relatedif I put objects and text in the same layer, and then go to another .dwg file and then xref that file, the objects show but the text won't.
I've tried different layers and non and anotative text, but I can't get the text to show.
2013 Civil 3D
Using project navigator my drawings get xrefed from the constructs, through the views, and finally to the sheets tab.
I recently realized that I needed to fix / change my linetypes on 5 different drawings starting at the construct. When I had finally finished fixing the layer linetype / line LTscale / drawing LTscale to get it to look exactly the way that I wanted, I had to go through my views drawings, and the sheets drawings, detach the xrefs, re-attach them, and then modify the layers to the colours that I wanted.
Some people had the same problem about 10 years ago in this thread, and the poster at the bottom sums it all up nicely. This is not a VISRETAIN issue. I just want changes to my linetype changes to flow through all xrefs, just as if I had moved a line.
[URL]
I would like to see a setting added to CAD that would allow linetype changes to flow through, and a colour setting that would allow colour changes to flow through. Maybe VISRETAIN is too broad of a command, and needs to be broken down into linetypes, colours, LTScales. etc etc etc.
i have a large number of drawings that need xrefs detached and re-attached with the latest model xrefs, any way to do them in bulk rather than opening each individual drawing? the problem started a while back, when opening drawings, ACAD is not loading the latest 'saved' model when opening drawings...
View 5 Replies View RelatedAfter some infrastructure changes, I need to repath all of my xrefs. I know I can easily do this using the Reference Manager, and I have. However, when I open the drawings that I have updated, the xref images (jpg, png, etc) do not display, but rather only show the image border. I must then go into the External References pallette in each drawing and reload each reference. This works fine, but it is awfully clunky, as I must do this for every drawing.
Is there a way I can batch reload these references after updating the path in Reference Manager?
I'm using Autocad 2013. My problem is when i use "recover files & xrefs", all the files recovered are saved as a 2013 dwg version. As we all save our files here as 2007 version so when others opened the files they are getting some of the xref files missing in the drawing.
Is there any option to save files in a lower version when i recover?
I am accidentally selecting the xref when hatching and thought I remembered a setting or something to where you could make it where the xref couldn't be selected when hatching? I know the work around. Just unload the xref and then hatch, just thought their was a setting for this.
View 1 Replies View RelatedTrying to use overlay to prevent some circular xrefs. When the civil plan is xreffed as an overlay, the images and pdf's xreffed in the civil file show up in the file it is xreffed into. As an overlay, this should not happen? the problem is that that both the civil and piping drawing has the same pdf xreffed and it is doubled up. Does overlay not work for images and pdf's? is there something else?
View 2 Replies View RelatedIs there a way for xrefs to stay attached to a drawing file when using Dropbox as a network? All files are saved to the dropbox which is loaded on both computers that need to access the files. If I do work and save an xref in a file that is then opened by someone else on a different computer, the xref is not loaded and has to be re-routed. Is there a way to avoid having to reroute xrefs everytime someone different opens the file?
View 2 Replies View RelatedI using a 27inch iMAC and running boot camp (WIN 7 Pro 64bit). 16GB RAM. Using NAS network storage.Graphic card. but still slow and crash it is the win 7 aero theme will affect the autocad?
View 2 Replies View RelatedWe're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
3 MB file with several Xrefs takes about 20 mintues to open. I've purged, recoverd, and audited the working drawing and all the overlayed Xrefs, with no success. When I open in AutoCad Version 2007, it opens quickly (one minute)
View 6 Replies View RelatedI am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies View RelatedUsing Autocad 2013 I'm having this massive slow down when I choose a tool such as trim. All I have to do is select the trim (or chamfer etc) button for example and it's as though I get a framerate of about 5. I've never had a problem in 2012.
Rough pc specs:
win7 x64
8gb ram
i3-2100 3.1ghz
amd radeon hd 6700 (latest drivers installed)
The pc specs are fine - perhaps an issue with the graphic card?
I have noticed that Inventor 2013 is very slow to close out of a file. I just opened an iam that had less than 50 parts. Rotated it to see the other side, then closed it. Took 1min-21 seconds for the swirley circle to go away and I could open my next file.
View 6 Replies View RelatedI recently discovered that my AutoCAD would become slow, and selection very choppy, after exiting the block editor. Running a purge, audit or regenall does not solve the problem. I have to quit the program and restart. I've also noticed that this has been happening since 2007. It is not my computer, as I am running Windows 7 x64, with AutoCAD 64 bit.
View 2 Replies View RelatedI find autocad2013 very very slow saving, especialley with larger files. The same files save a lot faster in 2012.
View 9 Replies View RelatedWe have installed autocad 2013 on windows 7 64bits VM (xendesktop 5.6 on VMWare Hypervisor) and the mouse move is very slow or the cursor stop and move again.
I have tried these tips without success
[URL]
inventor 2013- single user
working with an assembly of about 100 parts
file was working fine until about the last large componet i am working on.
when I edit a part and then hit return the ("excuting end edit componet " in lower left hand ) it seems to take some time to compute. This part i have a lot of sketches that are tide to other componets to create the postion of those. so i think this is the reason. i supressed this compent and the file got about 75% better so I am thinking that this is my issue.
for example when i need to make a cut out in one compent that is overlaying another I create a construction projection of the componet and then use this to off set or create a feature from that so that if I change the other one it changes the cut out. I am thinking the computer is having to figure out what is changing everytime.
I installed IV13 onto four of our workstations including the update 1.
Due to the size and complexity of our project we are using Vault to manage all of our parts and drawings.
We had issues with 2012 but managed to get around them. I was hoping 2013 would solve some of them but we are experiencing extremely slow performance with 2013. It takes at least 15 to 20 minutes to open and update drawings. Swopping between an assembly and IDW to do updates takes another 20 minutes to refresh and update.
This is happening on all four of the workstations.
I have come across a few forums with this same issue and I have tried setting up the options as described in them but have had no difference in performance.
HP Elitebook 8760W
Intel(R) Core(TM) i7-2600QM CPU @ 2HGZ
8GB Ram
Nvidia Quaadro 3000M
When working in detail drawings inventor progessivly gets slower, the more information on the drawing, the worse it gets.I was watching the task manager, For ANY command, the 1st core runs at 100% for up to 30 seconds, while this is happening, Inventor is dead.
EG, add a revision row, delete a symbol, zoom in or out, pan, add a dimension, move a leader etc.for each command/move takes 10 to 30 seconds to get control, it took me 45 minutes, to add a revision row and print 15 drawings this morning.