I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 RepliesUpon selecting anything in 90% of any drawings the crosshairs disappear and CAD2014 freezes for 2sec.
It's a Dell Presicion T1600, Xeon 3.4Ghz, 16GB RAM, Quadro2000 with a 120GB SSD as the primary running CAD2014 premium.
It started recently.
This happens even if I toggle HW acceleration. We draft mainly in model view with the 2D Wireframe style.
I have created a slide show by Inserting Media file to Timeline, Insert Photos. I then Share, and then Create Video File. This is a great product, so easy. However I noticed that the time delay on each picture frame is about 3 seconds. I have manually increased each slide to 5 seconds using the slider on the timeline. But this is cumbersome. Is there a place to change this default 3 seconds to what I want in the software? I cannot find it.
View 3 Replies View RelatedI have a very fast PC (only takes about 6 seconds for Photoshop to start) but no matter if I open a TIFF or JPEG file, it takes about 7 seconds for the file to open (TIFF is only about 7 MB). It tried this with many different files on the local drive or the network drive and have the same results.
Interestingly, when using the Image Processor or the Web Photo Gallery, then the file opens in a split second. I have a 2nd PC running CS3 as well under XP and have compared Photoshop settings and everything is identical. The 2nd PC doesn't have any issues with these files.
I have even tried the suggestion to switch from a network printer to a local one - doesn't make any difference.
when i go to open or save a file in illustrator, the pop up box will only last 2 seconds? i just recently installed the new maverick osx but it was working fine yesterday.
View 1 Replies View RelatedIs there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies View RelatedMy file has over 100 layers and 20,000 containers that are in 3D. It worked fine when I drew them. After I closed the file, it always takes 5 to 10 min to open. I can't delete a layer (layer2) or rotate angle of view or any normal command such as purge and audit.., it always crashes.
I was wondering that if I did anything wrong casued this, and that whether my approach of drawing these is correct, performace wise.. and what would be the better way of doing this..because my drawing is now uesless I can't even rotate it in vp ro do anything...
I own a copy of Photoshop CS6.Switching from Photoshop CS to CS6, I have found this version to be extremely slow and I can not find a reason why it is like this. It is impossible for me to work on it.
Problem: Slow performance, when using the brush tool there is a long delay - lag. The brush takes more than 8 seconds to catch up with my strokes.
Software:Adobe Photoshop CS6 x64OS:Windows 7 x64 SP1CPU:AMD Phenom II X4 965 BEGPU:Radeon 6790 OC @ 920MhzRAM:A-Data DDR3 1333Mhz CAS9 4GB (x2)SSD:A-Data 510 128GB SATA3HDD:Samsung SATA 1TB
Tried:
- Memory usage allowed upgraded to 6GB, nothing changed.
- Default selected "Scratch Disk" is the main SSD which has over 58GB of free space, I've tried selecting the secondary HDD as well but nothing changes.
- Disabled the "Use Graphic Processor" square. nothing changed.
- Disabled the "Use open CL" square in advanced Graphic Processor Settings. Nothing changed.
- Changed power management settings in windows to "High Performance". nothing changed.
- Disabling tablet pc service doesn't work.
Notes:
- Graphic drivers are the latest release on AMD website
- Windows is completely updated
- SSD Firmware is the latest available.
- The issue happens both with mouse and tablet.
- 1px brush and 5000px brush lag just alike in zoomed and not zoomed canvas.
- This happens on both x64 and x86 versions of the software.
When I work with a drawing that have several XRefs, it is too slow to open, save, or to do everything. I configured:
SAVEFIDELITY=0, XLOADCTL=2, INDEXCTL=3
Is there any other way to improve the performance?
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
I have CS6 installed on a Mac Pro desktop, 3.3 Ghz machine, 6 Gb RAM, running OS X Mountain Lion. Everything is running fine, updated and it's a great machine. But I've noticed that opening Photoshop files that are somewhat large and layered take WAY too long to open or "save." I mean...3 minutes is much too long to wait.
I have a spare physical drive configured (in preferences) for extra RAM, with plenty of empty drive space. The startup drive has well over 250 Gb of space remaining.
The only applications running are Photoshop and Bridge. There is 6 Gb of RAM to run these applications and open files. OpenGL is checked in Preferences and I'm running an nVidia graphics card, as well.
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
How do you change the palette delay time?
View 1 Replies View RelatedI have CAD2014 installed intalled everything has been great until last week when I got an error that I had low autocad memory. I still have 127GB available on my PC. Since I received this errow I have noticed that when moving large amounts of items on a drawing, there is a big delay in the move.
View 2 Replies View RelatedCannot find a way to set up angular dimensions to show that first zero if the minutes or seconds value is less than ten.
Desired: <degrees>08'05"
Stuck with: <degrees>8'5"
so i recently started taking an architect autocad class. our first project was nothing special but for some reason whenever i save it on my removeable usb after working on it at home, it wont open on the schools computer. it doesnt open as the specific file i wanted, but instead it opens up a blank file named drawing1.dwg. the file name does not even come up at the top of the screen.
View 4 Replies View RelatedI want to create an AutoCAD point clound (.pcg) from a FARO laser scan file (.fls). When I go through the steps in AutoCAD Mechanical 2013, I get the following error (see attached file for screen shot):
Progress.......
Failure! - Fail to open scan file.
Complete, 0 point cloud created, 1 failed.
I had photoshop CS4, and it's been working fine since I've gotten it, but yesterday I started having this weird issue. I open it, it opens fine, then windows tells me photoshop has stopped working. I've restarted, re-installed and tried over and over, but it won't stay open for longer than 5 seconds. My mother gave me CS6 to replace CS4.
View 1 Replies View RelatedI've recently been sent an IGS file via a secure file transfer site. Accessed the site, downloaded the file no problem but can't open it in ACad.
I've been advised to use the IMPORT command but this hasn't worked either, just provides me with the pop up saying only V7 & V8 are supported, see screen shot below.
Do I need to purchase a specific piece of software (plug in) to allow me to open the file?
When opening the a .dwg file in autodesk I am prompted with a message telling me that this DWG file was saved by an application that was not developed or licenced by Autodesk. What would you like to do? I say continue opening the drawing. Next the drawing opens but another message appear Proxy Information.
The drawing you have opened or referenced contain custom objects created by an unavailable Object ARX application. You do not need the original application to display proxy representations of objects that were saved in the drawing. However, many manufacturers including Autodesk, provide object enablers that also allow you to edit these custom objects. Visit the AutoCAD Object Enabler assistant web page to locate Autodesk object enablers or contact the software publisher about object enablers for other applications.
I believe the drawing has come from a Pro E environment. The file has been attached.
I am a contractor that does work for several different companies. When these companies send me their dwg file I have no problem opening them up to edit them, but once I complete my edits and email the file back to them they are telling me that their autocad crashes while trying to open the drawing or the whole computer itself. Most recently I only made a very minor edit to their dwg which was editing two areas of text and still crashes their computer when I send it back. I am using Autocad lt 2013, while they are using autocad 2010. I backsaved the file as well was purged the drawing after I was finished and still no luck. Also I noticed on another job after doing very minor edits, once I saved the new version the file file sized multiplied like ten thousand times its size.
View 9 Replies View RelatedMy AutoCAD will not allow me to open my recently used file. It keeps coming up with a message saying:
'Drawing File is not Valid'
i got for a project some files (in the pic below) wich i actually can use for an 3D model ( geodate's). Problem is, i dont know how i can use/open them to generate an 3D Model. How to figure out which programm I can use this files or how i can use them in AutoCAD?
View 1 Replies View Relatedim new to autocad and what i to know is, is there any way to open a invalid file on autocad?
View 3 Replies View RelatedWhen I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies View RelatedDoes a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedWhen I change the column headings e.g. date, tag size etc., on the OPEN FILE box, they revert to the unchanged headings after toe box is closed.
Is there a method of keeping them as I want them ?
I'm using Autocad 2013, and the Open File Dialog Box has disappeared. Every time I try to open a drawing, it defaults to the command line. I have the same error with Image Attach. It's only my user. Other Users on the computer do not have this issue. Settings to change it.
View 5 Replies View RelatedI install AutoCAD LT 2013 when I click install after few minute it show this error message.
The system cannot open the device or file specified. (Please see attached file)
Iused DXFOUT as below to reduce file size. It works well so I want to create a script for that.
Type DXFOUT to export to DXF file.Open the newly created DXF file and run PURGE > ALL, -PURGE > REGAPPS and AUDIT. SaveAs the DXF file back into a DWG file.
The problem is when we use dxfout, it will export to a DXF file but still open DWG file. It means we have to open that DXF file to fix. Cannot use 1 script to do that.
I try this script to save as to dxf, save as will open that DXF automatically and continue with purge, audit but the file size not change.
saveas
dxf
16
-purge
r
n
audit
y
saveas
2007
y
I think the problem is the different between saveas and export.
I have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View Related