AutoCAD Inventor :: 2013 Gives Error - Cannot Open XML File
Aug 8, 2012
When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies
ADVERTISEMENT
Apr 20, 2012
I have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies
View Related
Jul 20, 2013
How do I open an 2014 assembly file to 2013
View 1 Replies
View Related
Jun 25, 2013
I had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies
View Related
Mar 21, 2013
I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
View 2 Replies
View Related
Jul 29, 2012
i get the following error msg "an autodesk product failed to send the required value for UPITOKEN. the error report sent to autodesk may be incomplete." and then another one also come "FATAL ERROR: unhandled e06d7363h exception at 75b19617h". then finally close.
View 3 Replies
View Related
Feb 25, 2008
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies
View Related
Mar 18, 2013
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies
View Related
Apr 1, 2009
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large
from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
View 5 Replies
View Related
Oct 2, 2012
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
View 4 Replies
View Related
Sep 12, 2013
so i recently started taking an architect autocad class. our first project was nothing special but for some reason whenever i save it on my removeable usb after working on it at home, it wont open on the schools computer. it doesnt open as the specific file i wanted, but instead it opens up a blank file named drawing1.dwg. the file name does not even come up at the top of the screen.
View 4 Replies
View Related
Aug 9, 2012
I want to create an AutoCAD point clound (.pcg) from a FARO laser scan file (.fls). When I go through the steps in AutoCAD Mechanical 2013, I get the following error (see attached file for screen shot):
Progress.......
Failure! - Fail to open scan file.
Complete, 0 point cloud created, 1 failed.
View 1 Replies
View Related
Jul 10, 2008
I am getting this error on all of my Vista 64 systems running Autocad Map 2008 ("fixed" to run on 64 bit):
Error: Cannot Open Frame File .AcMapCoordinateTransform.cpp
I have found some info here showing the same problem on a 32 bit machine:
[URL]
The problem is I don't know how to set my machine to NOT use the 3G switch, as this is Vista x64 not XP x32.
I have tried this with multiple machines and fresh builds.
View 2 Replies
View Related
Mar 13, 2013
Using AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
View 3 Replies
View Related
Nov 26, 2013
This error (autocad error handler re-entered, Exiting now) happen when i was opening multiple autocad file. After i pressed on the 'ok' button the program close everything without saving the work i had done.
View 1 Replies
View Related
Apr 17, 2013
A consultant working in PowerCADD 2000 sent me a DXF converted file. I have tried opening it in all CAD versions with no success.
I attempted converting it in word to txt file and then back to DXF but still no luck.
View 4 Replies
View Related
Feb 20, 2013
Get this error when I try to open more than one file. Happens on different files, but especially on jobs that have side panels on packaging. The files have placed .psd images. Happens on different computers (10.6 & 10.8.2).
Can get the file open usually by closing the othere open file, but then is hard to copy and paste between files. Sometimes I get this when trying to open one file, but restarting Illustrator usually fixes this.
Have tried working directly from the hard drive, and still get this problem. Does to follow an exact pattern, can try to open file a, then b one day thsi will work another will fail. Seems like something is corrupting the memory, and usually happens with more complex files. Happens in CS5 & CS6, though I mostly work in CS5.
View 1 Replies
View Related
Aug 7, 2013
I've recently been sent an IGS file via a secure file transfer site. Accessed the site, downloaded the file no problem but can't open it in ACad.
I've been advised to use the IMPORT command but this hasn't worked either, just provides me with the pop up saying only V7 & V8 are supported, see screen shot below.
Do I need to purchase a specific piece of software (plug in) to allow me to open the file?
View 7 Replies
View Related
Nov 14, 2012
When opening the a .dwg file in autodesk I am prompted with a message telling me that this DWG file was saved by an application that was not developed or licenced by Autodesk. What would you like to do? I say continue opening the drawing. Next the drawing opens but another message appear Proxy Information.
The drawing you have opened or referenced contain custom objects created by an unavailable Object ARX application. You do not need the original application to display proxy representations of objects that were saved in the drawing. However, many manufacturers including Autodesk, provide object enablers that also allow you to edit these custom objects. Visit the AutoCAD Object Enabler assistant web page to locate Autodesk object enablers or contact the software publisher about object enablers for other applications.
I believe the drawing has come from a Pro E environment. The file has been attached.
View 2 Replies
View Related
Oct 23, 2012
I just updated my computer with the latest and greatest parts and was excited to open Revit 2013 and try it out. I installed it last night and tried to open it. The splash screen appears for a second and then closes. On the first try, a yellow triangle with an exclamation popped up, it hasn't happened since. I fixed the registry with MS fix it, uninstalled it, and reinstalled it.
I read that it was not compatible with hyperthreading 8 core CPUs. I don't think this is the issue, because I do not have a 8 core CPU. I have a i7 3.5 Quad Core with Hyperthreading, 16 gigs RAM, 1 gig Graphics Card, and a Solid State Drive.
View 2 Replies
View Related
Aug 28, 2012
We are using AutoCAD Civil 3D Land Desktop Companion 2009 on all machines and one of our machines is getting the message "Error opening Point Database" and then gives the project file pathcogopoints.mdb.
It also gives the message "The Microsoft Jet database engine cannot open the file. It is already opened exclusively by another user, or you need permission to view its data." It is not opened by another user and permissions have been given for all machines to access these files.
Background information: We move older projects to an external hard drive for archiving and occasionally need to access them as the need arises. We have done this successfully for some time without issue, but now one of our machines is giving the above error. The other machine, which the external hard drive is connected, does not have this problem. We tried moving one project file back to the original location and it seemed to work okay, but another file did not. Some files were created using an older vrsion of AutoCAD, but that has not been a problem with opening them in the past. All sharing permissions to the external hard drive have been checked and seem to be working properly.
View 2 Replies
View Related
Aug 27, 2013
AutoCAD 2014 creating "fatal error unhandled access violation reading 0x0010 exception at 65e3f417h" while attempting to reload a MicroStation file that worked previously in dwg.
View 9 Replies
View Related
Sep 4, 2013
When AutoCAD is closed and I try to open a drawing from the Windows Explorer I get a fatal error and when AutoCAD is opened before opening the file from Windows Explorer everything works fine. We have this problem with several stations at our office.
View 4 Replies
View Related
Jul 5, 2012
I am a contractor that does work for several different companies. When these companies send me their dwg file I have no problem opening them up to edit them, but once I complete my edits and email the file back to them they are telling me that their autocad crashes while trying to open the drawing or the whole computer itself. Most recently I only made a very minor edit to their dwg which was editing two areas of text and still crashes their computer when I send it back. I am using Autocad lt 2013, while they are using autocad 2010. I backsaved the file as well was purged the drawing after I was finished and still no luck. Also I noticed on another job after doing very minor edits, once I saved the new version the file file sized multiplied like ten thousand times its size.
View 9 Replies
View Related
Dec 1, 2012
My AutoCAD will not allow me to open my recently used file. It keeps coming up with a message saying:
'Drawing File is not Valid'
View 1 Replies
View Related
Oct 5, 2012
i got for a project some files (in the pic below) wich i actually can use for an 3D model ( geodate's). Problem is, i dont know how i can use/open them to generate an 3D Model. How to figure out which programm I can use this files or how i can use them in AutoCAD?
View 1 Replies
View Related
May 3, 2012
im new to autocad and what i to know is, is there any way to open a invalid file on autocad?
View 3 Replies
View Related
Sep 10, 2013
We are facing strange issue with all different versions of AutoCAD (2007, 2011, 2013). While users are working on the file, all of a sudden the contents (work done) are lost and it becomes all blank. The file size is same but when we open the file all the work done is not displayed, but just a blank screen.
It happens occasionally and there is some Automation Error in the command line below. The software is not hanging but the open file is in hang state and we have to close it. While closing whether we select yes/no the content (work done) is all lost. The temp location where the files are saved in one of the computer is become huge around 40GB will many Autocad autosave and temporary files; if it has anything to do with it !
View 9 Replies
View Related
Jul 23, 2013
A co-worker and I came in this morning and both of our inventors are giving us this Faild to Open error. We run on single user accounts and we do not use vault. I then tried to backup all of my documents, but it would not let me backup either. I did a properties on the folder and it showed everything was read only. I click off read only and it let me backup. But still will not let me open a model part or assembly??? I tried turning off Avast and that did nothing either.We are still running 2008. Inventor and Autocad.
View 3 Replies
View Related
Nov 3, 2013
Does a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies
View Related
Sep 12, 2012
When I change the column headings e.g. date, tag size etc., on the OPEN FILE box, they revert to the unchanged headings after toe box is closed.
Is there a method of keeping them as I want them ?
View 1 Replies
View Related