AutoCAD Inventor :: How To Open 2014 Assembly File To 2013
Jul 20, 2013How do I open an 2014 assembly file to 2013
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: 2013 And 2014 Close When Open Any File
Jun 25, 2013I had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedAutoCAD 2013 :: Does File On 2014 Open On 2010
Nov 3, 2013Does a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedAutoCAD LT :: 2013 And 2014 Select File Dialog Box Won't Open Anymore?
Aug 6, 2013As soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
AutoCAD Inventor :: Cannot Open New File In 2014
Oct 24, 2013In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedAutoCAD Inventor :: 2014 Cannot Open Its Own File?
Apr 17, 2013My Autodesk Inventor Professional 2014 (witch I downloaded as beta) can not now open it's own files, but it opens other models that I did using 2013, attached is the message that shows up
View 1 Replies View RelatedAutoCAD Inventor :: 2013 - Assembly Will Not Accept Updated Part File Name
Nov 22, 2012I am currently working on a school group project that requires me to submit all inventor files as "LASTNAME_FIRSTNAME_PART,ASSY,DRAWING,etc..NAME". My original parts were all done in mm instead of cm, so for our project, I opened all new files and derived the same parts at a different scale to fix this scale issue between the members. For the new derived parts I temporarily allowed the file name to remain as part1, part2, part3.... and continued with the assembly. Now that my assembly is complete and I would like to change my part file names to the required format, my assembly will not show the parts and (?) symbol is shown by all parts with updated file names. I also changed the original file names and now the new derived parts, when opened, have the same (?) which I assume is related to the fact that the derived parts are dependent on the original file. Is there a way to update this information? We are using INVENTOR 2013.
View 2 Replies View RelatedAutoCAD Inventor :: Open A Assembly File / User Selects A Part / Plugin Automatically Runs
Feb 27, 2013is it possible to write a plug in that runs when a user does something.example. you start inventor and open a assembly file the user selects a part and the plugin automatically runs.no pussing buttons, no quick key, it just runs.
View 2 Replies View RelatedAutoCAD 2013 :: How To Open Two Or More Files In 2014
Jul 8, 2013to open two or more files in autocad 2014
becomes very slow to use?
zooming is slow?
why this happens?
AutoCAD 2013 :: 2013 To 2014 Hatch Pattern File Migration?
Jul 1, 2013I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
AutoCAD 2013 :: 2014 Freezes With Open Command
Oct 1, 2013I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies View RelatedAutoCAD Inventor :: 2014 Assembly And Drawing Are Not Working
Nov 21, 2013When I try to start a new Assembly or Drawing in Autodesk Inventor Professional 2014 - Student Version, this error shows up:
I tried to copy the file "AmSrv.dll" from another computer and the error is still showing up.
AutoCAD Inventor :: Unable To Edit Part In Assembly / 2014
Jun 7, 2013When I double click a part in an assembly it does not edit the part.
When I right click "edit" is greyed out.
How do I edit a part in an assembly.
AutoCAD Inventor :: 2013 Gives Error - Cannot Open XML File
Aug 8, 2012When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies View RelatedAutoCAD Inventor :: 2014 Assembly / Unable To Reorder Browser Items
Jun 28, 2013place a component in the assembly.
create an assembly plane based on the assembly origin planes, (not the component origin planes).
in the browser, try to drag the plane above the component.
its not working on my machine?
AutoCAD Inventor :: 2013 - Parasolid File Doesn't Open
Apr 20, 2012I have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedAutoCAD Inventor :: No Thumbnail Preview In File Open Dialog Box - 2013
Mar 21, 2013I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
AutoCAD Inventor :: Open Up Parts Separately - When Trying To Open Assembly
Jul 28, 2013Why am i forced to open up parts separately when trying to open my assembly. Once I open my assembly I get pop up windows asking me to either open, skip, or find the part it specifies.
View 2 Replies View RelatedMaya :: Can Import / Open Data From 2014 In 2013
Jul 4, 2013i want to open the data from Maya 2014 in Maya 2013.
I didn't find any options under save as; or export.
AutoCAD 2013 :: 2014 / New Synonym Feature Same As PGP File?
Apr 30, 2013Isn't the new Synonym feature the same as PGP file?
View 7 Replies View RelatedAutoCAD Architecture :: Importing Excel 2013 File Into 2014 DWG?
Jul 8, 2013When I try to attach a 2013 Excel file into a 2014 drawing I get a message 'You have selected an unsupported DGN File. Only V7 and V8 files are supported.' Cannot attache through the Import command either. I know in past versions you could insert the file and any changes made to the file appeared to the attachment in the drawing.
Is this no longer possible? Surely not, it is way to handy. What am I overlooking to make this happen?
AutoCAD Inventor :: Error Opening Assembly On 32bit 2013 That Was Created On 64Bit 2013
Oct 2, 2012I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
AutoCAD Inventor :: Opening IDW From 2013 In 2014?
Jun 18, 2013I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
AutoCAD Inventor :: Can 2013 Files Be Opened In 2014
Oct 31, 2013I made these bunch of other parts at school this time and they use 2013 and I use 2014 at home, will I be able to open them
View 2 Replies View RelatedAutoCAD Inventor :: Opening 2014 Files With 2013?
Sep 19, 2013One of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
AutoCAD 2013 :: 2014 Object Enabler Causes Fatal Error On Etransmit And File Conversion
Aug 16, 2013I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedAutoCAD Inventor :: 2014 SP1 Doesn't Let To Paste With Constraints Tool Open?
Nov 26, 2013I used to paste parts all the time while the constraints tool was open which made for a good work flow when I had to insert a lot of the same part. I just updated to SP1 and whenever I paste a part the constraint tool closes now.
How to use the ability to paste parts while constraining?
AutoCAD 2013 :: 2014 Sheet Set Will Not Open Older Sheet Sets?
Apr 2, 2013I am having a problem opening older sheet sets from AutoCAD 2014.
I can select the .dst file, but when it "opens" I onlly have the icon in the seet set manager and nothing else, it is entirely blank.
I made a new sheet set, but now older versions of AutoCAD cannot read that one.
Maya :: 2014 Open File Window Not Appearing?
Jan 16, 2014So for some reason when I open maya and try to open a file or create reference the window doesn't pop up and I can't click anything else whenever I try I hear a ding sound. I've tried uninstalling and reinstalling.
View 2 Replies View RelatedAutoCAD Inventor :: Unable To Migrate 2013 Adsklib To 2014
Jun 17, 2013Is there any way to upgrade an entire 2013 *.adsklib to 2014 version? Information given at URL.....would seem to indicate the process is seamless...
When I navigate to the 2013 Design Data as indicated by the Material Style Migration dialog, the upper section is greyed out as shown. No Colors.xml or Materials.xml files exist. This displays whether I choose to create a new library or select an existing one (I get the feeling that this tool applies only to pre-2013 migration).
I am unable to proceed to the next step of migrating custom content center libraries, since many of the content items depend upon the custom materials/appearances definitions.
AutoCAD Inventor :: Transfer Library 2013 Vs ADMS 2014
Aug 12, 2013how is possible to transfer library from local Desktop Content in Inventor 2013 do Autodesk vaulet Server 2014 and vice versa? I got an version error.
View 4 Replies View Related