AutoCAD Inventor :: Unable To Edit Part In Assembly / 2014
Jun 7, 2013When I double click a part in an assembly it does not edit the part.
When I right click "edit" is greyed out.
How do I edit a part in an assembly.
ADVERTISEMENT
AutoCAD Inventor :: 2014 Assembly / Unable To Reorder Browser Items
Jun 28, 2013place a component in the assembly.
create an assembly plane based on the assembly origin planes, (not the component origin planes).
in the browser, try to drag the plane above the component.
its not working on my machine?
AutoCAD Inventor :: Edit Part In Assembly
Mar 26, 2012I have written a program where i will copy inventor assembly tree to custom form in tree format. Now my problem is whenever i click a part in tree i must edit the part. I am trying to access the Fx parameter/IAssembly to use it but not getting desired results .
View 8 Replies View RelatedAutoCAD Inventor :: Getting User Selection Within Part Edit Mode In Assembly File
Feb 24, 2013I'm working on Autodesk VBA, and I'm trying to get user input on which vertex to use for a constrain. I want to make a macro that can go into part edit, allow user to select a vertex, and then automatically set up the constraint. Initially I wanted to do this in a single macro, using this short piece of code
while oSelectSet.Count <>1
DoEvents
Wend
While this worked when run directly from VBA, if I call it as a macro in Autodesk itself, the DoEvents doesn't seem o work because I wasn't able to make any selection at all. I googled and it seems like this is just how macros are.
So I split the code into a 2 subs and a function (as attached), and put them into separates rules that I call using a form in Autodesk. The first sub "Meta1Pin1_1" works, then I would select a vertex in edit mode. But when I go ahead and call the second sub "Meta1Pin1_2", I get the error message that I created which says no vertex is selected. But if I select a vertex and call the second sub again, it will work.
So I've been trying different things and I realize that every time when I first call the second sub, my selection is erased teh moment it goes into the sub. But, for some unknown reason, the selection will remain when I call it the second time. I can't figure out what exactly happened between the first and second call of the same sub, that allowed the selection to remain.
' prepares assembly for user input by grounding bones and going into part edit
Public Sub Meta1Pin1_1()
Dim oDoc As AssemblyDocument
[Code]....
AutoCAD Inventor :: Part Inserted In Assembly File As Tube And Pipe Run Part?
Mar 28, 2012Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedAutoCAD Inventor :: ILogic Rule For Each Part In Assembly To Change Part Parameter
Apr 1, 2013I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
AutoCAD Inventor :: Simplified Part - Assembly Won't Merge Into One Seamless Part
Dec 11, 2013I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
AutoCAD Inventor :: Part Created In Assembly Does Not Update To Part File
Nov 15, 2013New user 2014
Part created in assembly does not update to part file.
AutoCAD Inventor :: Can Part Make Alterations To Other Part When Inserting In Assembly
Mar 29, 2012I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
AutoCAD Inventor :: Find Mass Of A Part At Its Part And Assembly Level
Jul 1, 2013I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedAutoCAD Inventor :: CoG Needed For Each Sub Assembly In A 2 Part Assembly On An IDW
Oct 3, 2013I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
AutoCAD Inventor :: Find Part Which Is Inside Another Part Or Assembly?
Aug 20, 2013If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
AutoCAD Inventor :: Project Sketch From Part To Another Part In Assembly?
Feb 7, 2013I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
AutoCAD Inventor :: Mirrored Part Gets New Part Number In Assembly
Dec 3, 2013Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedAutoCAD Inventor :: Unable To Derive A Part Containing Only A Block Into A Sheet Metal Part
Nov 15, 2011 I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
AutoCAD Inventor :: 2014 Assembly And Drawing Are Not Working
Nov 21, 2013When I try to start a new Assembly or Drawing in Autodesk Inventor Professional 2014 - Student Version, this error shows up:
I tried to copy the file "AmSrv.dll" from another computer and the error is still showing up.
AutoCAD Inventor :: Unable To Make Mirrored Copy Of Part Created By Altering Standard Part
Apr 1, 2013I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
AutoCAD Inventor :: How To Open 2014 Assembly File To 2013
Jul 20, 2013How do I open an 2014 assembly file to 2013
View 1 Replies View RelatedAutoCAD Inventor :: 2014 PRO - List Of Images Next To The Part In BOM?
Sep 6, 2013Where can I see a list of the images that show up next to a part in the BOM
I have the same item showing up on 2 seperate line items.
once with the standard yellow box
once with to thin lines on top of each other?
can I change how inventor sees the part
can I change it to the yellow box?
AutoCAD Inventor :: 2014 Crashes While Executing Revision Table Edit?
Dec 21, 2013Inventor 2014 crashes when executing revision table edit. This started after installing windows 7 SP1(x64) and SQL server 2012 express (x64).
View 1 Replies View RelatedAutoCAD Inventor :: Get Assembly Name From Part?
May 8, 2013I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
AutoCAD Inventor :: Unable To Migrate 2013 Adsklib To 2014
Jun 17, 2013Is there any way to upgrade an entire 2013 *.adsklib to 2014 version? Information given at URL.....would seem to indicate the process is seamless...
When I navigate to the 2013 Design Data as indicated by the Material Style Migration dialog, the upper section is greyed out as shown. No Colors.xml or Materials.xml files exist. This displays whether I choose to create a new library or select an existing one (I get the feeling that this tool applies only to pre-2013 migration).
I am unable to proceed to the next step of migrating custom content center libraries, since many of the content items depend upon the custom materials/appearances definitions.
AutoCAD Inventor :: Change Part Within Assembly
Oct 1, 2013I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
AutoCAD Inventor :: Replace Assembly With Part
Oct 6, 2012I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
AutoCAD Inventor :: Placement Of A Part In Assembly?
Sep 27, 2013When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
AutoCAD Inventor :: New Part Or Assembly Numbering?
May 28, 2013Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
AutoCAD Inventor :: Transparent Part For An Assembly
Aug 1, 2013as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies View RelatedAutoCAD Inventor :: Find Part In Assembly From BOM
Nov 25, 2013I've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies View RelatedAutoCAD Inventor :: Part Colours In An Assembly
Sep 14, 2012I have a part that is inserted in an assembly. If I change the color of certain portions of the part it isn't reflected in the assembly.
View 5 Replies View RelatedAutoCAD Inventor :: How To Use Part Parameters In An Assembly
Jul 30, 2012I need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
AutoCAD Inventor :: Rotating Part In Assembly
Aug 29, 2013I have an assebly where i have imported parts and other assemblies. Unfortunatly during process of assigning them together they have rotated by various angles.Is it possible to somehow "reset" the rotation of part according to global xyz?
View 3 Replies View Related