My Autodesk Inventor Professional 2014 (witch I downloaded as beta) can not now open it's own files, but it opens other models that I did using 2013, attached is the message that shows up
View 1 RepliesIn the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedHow do I open an 2014 assembly file to 2013
View 1 Replies View RelatedI had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedDoes a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedAs soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
I used to paste parts all the time while the constraints tool was open which made for a good work flow when I had to insert a lot of the same part. I just updated to SP1 and whenever I paste a part the constraint tool closes now.
How to use the ability to paste parts while constraining?
So for some reason when I open maya and try to open a file or create reference the window doesn't pop up and I can't click anything else whenever I try I hear a ding sound. I've tried uninstalling and reinstalling.
View 2 Replies View RelatedUsing Revit 2014 LT. Trying to open a file created by another user/seat of Revit 2014 LT (trial version for now).
Error Message reads "The file is open for editing by another user. If you open the file, you cannot save changes until the user closes is. In this case, your changes will overwrite the user's changes. What do you want to do?"
The file is NOT open by another user though.
I realize LT does not allow worksharing, but I assumed that was multiple users working on the same file at the same time. We need to open files one at a time, but by different users.
Yesterday inventor worked fine, I made 3 new parts.But today when I wanted to put these parts together in an assembly and I try opening a new file, inventor crashes?
I still can open projects, but can't create a new project.
PS. I'm using Inventor 2014 Student Version with service pack 1 on Windows 8.1
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies View RelatedSince I create sheet metal files in Inventor 2014, the subtype of this parts is not always the same. Migrated files from an earlier version have the right ID.
So my add-in to detect sheet metal parts fails.
I use the
If IV.ActiveEditDocument.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then
Is there a known issue with inventor 2014 and STP file exports loosing their colour settings?
We export PCB's and assemblies to Altium PCB CAD tools as step files and have just noticed that the colours don't travel well at the moment! The assemblies just end up light grey/white. I tried an earlier stp export dated 2011 and that opened fine in Altium but not any 2014 exports.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
on my initial start up, after installing the program, i've been getting this fatal error, "FATAL ERROR: Unhandled access violation reading 0x0000 exception at 92af22dh". I un-installed and re-installed and it still occurs. can't open the program. I'm using windows xp.
View 1 Replies View Relatedto open two or more files in autocad 2014
becomes very slow to use?
zooming is slow?
why this happens?
We just recieved 2014 C3D upgrade from 2012. I opened a 2012 dwg and saved in the 2013 file format. now when i attempt to open the drawing in 2014, C3D freezes while loading the drawing. It can't seem to get past "reading triangles from file". Weird thing is i can open a copy of the original 2012 DWG and work for minutes or hours in 2014 saving many times along the way and if i close the DWG and attemp to re-open, it freezes up everytime. I have done this same procedure with other DWG's and don't have any issues.
C3D 2014
Intel Xeon 3.07 GHz
15 GB Ram
Win 7-64 bit
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedAutoCAD LT 2014...Any way to turn off the bar near the top that shows what drawings I have open? I like to use a clean looking CAD screen and this is an entire line of stuff I don't need to see. Yes, I'm still using the AutoCAD LT classic workspace (modified of course).
View 2 Replies View RelatedI am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies View RelatedI have an Inventor dwg file that I corrected some drawing errors, checked it into the Vault and every time I try to open it,
my system crashes and a Diag Box appears saying that I should sent this info to Autodesk. I have filled it out on four different occasions but have heard anything back. how to get this drawing to open?
I can't open a new idw file. I get this massage when I try to open an idw file : " the template file you are using to create the new document needs to be migrated. please open it and explicitly save it before using it to create any more documents."
View 1 Replies View RelatedEverytime I want to open idw file only in one folder, it comes with dwg and idwfiles. I have to identify the idw files from many dwg files, sometime I just opened dwg file due to the same name with the idw file. (For project purpose, I need to save idw and dwg file in the same folder).
I hope I can open idw files only as I choose to open iam and ipt only, and remove *.dwg from File of types (*.dwg; *.idw).
Having problems trying open/convert a *.PRT file. ny "switches" in the OPEN/OPTIONS I may have to change other than default settings?
View 6 Replies View RelatedWhen I want to open my inventor files on windows explore or my computer window then i click double on file (ipt, iam, idw) then my files opening in different inventor program windows.
I mean i have a open innetor window and i want to see in single inventor program window when i click double on file. But now always opening new inventor applications. Then i lost time and memory.I have Windows 7 (64 bit) and Autodak inventor 2012.
Link for DWFX
This is a link for a dwfx file (Scroll down below)
I can open this is IE9. can you?
I thought that dwfx is for everyone to open & view including people with out IV. I am trying to open this in my home laptop (No iv)
C1
Inventor Professional 2013
Vault Collaboration 2013
I have an IDW file of my assembly, which is bombing out during opening. II can create pack and go file and post it in your designated folder. File is large.
View 9 Replies View RelatedNew installation on a new computer. First was crashing when I adjusted som Applicatin Options. Ran Service Pack 1. That seemed to work. But now I cannot even open up one *.ipt file without it crashing.
View 2 Replies View RelatedI have been trying to export a 2013 Inventor idw file as a 2010 AutoCAD dwg file.
I use to be able to do this without any issues however I am getting the following error message which prevents me from exporting the file.
"Could not open the DWG template file. Please check the path and try again."
I am using 2013 Inventor Pro.
This export feature use to work fine when I used 2012 Inventor Pro. however when i try to do the same from 2012 I get the same error message.
I have checked the default templates file path in the Aplications Option menu and I have tried to set a default in the AutoCAD template file option under the export destination setting under the save Copy As function.