AutoCAD Inventor :: Could Not Open DWG Template File
Nov 6, 2012
I have been trying to export a 2013 Inventor idw file as a 2010 AutoCAD dwg file.
I use to be able to do this without any issues however I am getting the following error message which prevents me from exporting the file.
"Could not open the DWG template file. Please check the path and try again."
I am using 2013 Inventor Pro.
This export feature use to work fine when I used 2012 Inventor Pro. however when i try to do the same from 2012 I get the same error message.
I have checked the default templates file path in the Aplications Option menu and I have tried to set a default in the AutoCAD template file option under the export destination setting under the save Copy As function.
View 2 Replies
ADVERTISEMENT
Jun 27, 2013
When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
View 4 Replies
View Related
Jun 13, 2013
i use Inventor 2012 and Vault Collaboration 2012, and I often find drawing template cannot be open. with error message The template file is open. Please close it and try again
in fact, I did not open the template file.
View 3 Replies
View Related
Nov 8, 2012
Cannot open an ipt or a dwg template from Vault. When he attempts to open it he sees a warning, Unexpected Error . He's able to open the iam template from Vault though.3 other people access Vault and aren't having any issues opening the same templates.
We are using Inventor 2013 and Vault Professional 2013, with Windows XP.
View 1 Replies
View Related
Dec 6, 2012
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
View 3 Replies
View Related
Mar 21, 2013
Any project I save cannot be opened later. When I try to open .cdr or template file I get the message ''CorelDRAW X6 (64-Bit) has stopped working. A problem...etc...please close the program''
I noticed that this first happened in projects that had text on them but now I can't open any .cdr file.
My system specs:
Intel Core i7 2600 3,40 GHz
RAM 16GB DD3
ATI Sapphire 6870 1G VRAM
SSD OCZ 120GB Sata III
Windows 7 Ultimate 64 bit.
View 12 Replies
View Related
Aug 28, 2011
I included a VB code in our drawing template, but then I get the "Warning: You have a non-empty VBA project.." message. If I copy the code into iLogic, I just get an error message. Why it runs fine as a separate macro, but doesn´t work in Inventor, or how I can include the code into the template? URL....
View 2 Replies
View Related
Aug 8, 2013
I am having problems with my drawing template, I can make changes no problem, but when I use the template to start a new idw file the changes are not in place.
For example; view preferences, I want to work in third angle, I have this selected on the template but each time I start a new idw I have to change it from 1st angle.
e.g. 2; sheet size, I changed it from text to a drawing property, but it doesn't change when I edit the sheet size.
View 7 Replies
View Related
Dec 30, 2013
I made some changes to our normal template file for inventor and saved it to my hard drive in the public folder. When i open through windows explorer its fine and everything is correct. When i open a new idw and select this file through inventor it comes in with some of the tables having different size text and none of my leaders coming in.
View 7 Replies
View Related
Sep 9, 2013
I recently update the template for my drawing files, change the title block, revision, note....and I can't find a clean way to import this template to the existing files. I tried the Drawing resource transfer wizard tool, but it doesn't seem to be doing anything that I want.
View 1 Replies
View Related
Apr 14, 2012
I have an idw file that has absolutely nothing in it.
The file size if 17.5Mb.
May need to add it to an ftp site if someone has available.
View 5 Replies
View Related
Oct 17, 2012
I've been very dissapointed with the 'new file' dialog box in inventor 2013 as it takes far too long to open and navigate. I was wondering if there is a way to add a link to a few drawing template files either to the ribbon or the quick access tool bar so i can avoid using the 'new file' dialog box.
View 1 Replies
View Related
Sep 1, 2011
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
View 2 Replies
View Related
Jun 6, 2013
I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
View 9 Replies
View Related
Apr 23, 2012
Inventor 2012.
change template file for frame-generated components?
View 2 Replies
View Related
Jan 23, 2012
Converting a default part template to a custom template?
View 1 Replies
View Related
May 7, 2013
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
View 8 Replies
View Related
Oct 4, 2012
Our customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies
View Related
Oct 3, 2012
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Oct 30, 2012
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
View 1 Replies
View Related
Apr 29, 2013
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
View 9 Replies
View Related
Jun 21, 2013
Setting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies
View Related
Jan 27, 2014
Problem1. I configure a template, give it a name and save it as a dwt.When I open a new drawing using the SAME dwt, all the customization is gone.
Problem2. When I open a dwg within Autocad or by double clicking the dwg file on explorer, is there away to open with the specific template ?
I am using Autocad 2013 and 2014 on a Windows 7 64bit
View 4 Replies
View Related
Aug 7, 2007
How i can open an existin drawing from a button or pull down? I need the script
View 4 Replies
View Related
Mar 1, 2011
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies
View Related
Apr 4, 2012
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies
View Related
Jul 15, 2012
How can you use a template file from your personal files to use it in an already existing .dwg file.
I knwo how to do it if I start the drawing from scratch and I select that template, but I want to put this existing drawing into my personal template file from my documents.
View 2 Replies
View Related
Dec 14, 2011
I have an Inventor dwg file that I corrected some drawing errors, checked it into the Vault and every time I try to open it,
my system crashes and a Diag Box appears saying that I should sent this info to Autodesk. I have filled it out on four different occasions but have heard anything back. how to get this drawing to open?
View 5 Replies
View Related
Jun 10, 2013
I can't open a new idw file. I get this massage when I try to open an idw file : " the template file you are using to create the new document needs to be migrated. please open it and explicitly save it before using it to create any more documents."
View 1 Replies
View Related
Feb 28, 2013
Everytime I want to open idw file only in one folder, it comes with dwg and idwfiles. I have to identify the idw files from many dwg files, sometime I just opened dwg file due to the same name with the idw file. (For project purpose, I need to save idw and dwg file in the same folder).
I hope I can open idw files only as I choose to open iam and ipt only, and remove *.dwg from File of types (*.dwg; *.idw).
View 5 Replies
View Related
Oct 24, 2013
In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies
View Related