AutoCAD Inventor :: Converting Default Part Template To Custom Template?
Jan 23, 2012Converting a default part template to a custom template?
View 1 Replies
ADVERTISEMENT
Revit :: Why Stair Type That Works In Default Template Stuffed When Copied To Own Template
Jul 2, 2012I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
AutoCAD Inventor :: How To Make Template Out Of Template
Oct 4, 2012Our customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies View RelatedAutoCAD Inventor :: Clone Part Using New Template
Nov 6, 2012A way to create a copy of an open part by starting from a template part file and recreating all the features?
Is there a simple way to copy a sketch definition from one part to another using either VBA or VB.net? Is there a way to access the browser so the order of feature creation can be copied?
AutoCAD Inventor :: Could Not Open Default Template File
Jun 27, 2013When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
AutoCAD Inventor :: Template Files Reverting To Default
Aug 5, 2013We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
AutoCAD Inventor :: Set Default IDW Template Used / When Select New Drawing
Dec 16, 2013How do you set the default IDW template used when you select 'New Drawing?'
View 2 Replies View RelatedAutoCAD Inventor :: Reduce Size Default Template?
May 21, 2012I am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies View RelatedAutoCAD Inventor :: Change Template Used For A Part Or Assembly
Mar 30, 2012there is a way to change the template used for a part or assembly. The problem is that I created a template to fit my needs but I had to update it and the update doesn't effect the parts created with the old version one. How do update the templates of the files created using the old template?
View 4 Replies View RelatedAutoCAD Inventor :: How To Create Drawing And Part Template
Nov 2, 2011I want them to appear as a one of the choices in the box after you click NEW (part, drawing, assembly) asside of standard options?
View 1 Replies View RelatedAutoCAD Inventor :: Template - Unable To Save New Settings As Default
Oct 26, 2012I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
AutoCAD Inventor :: Suitable ILogic Functions For Part Template?
Oct 4, 2011I am working on creating a new part file Template. Any useful and productive iLogic functions those are already available.
A while ago, I had seen one that would simply triger when part was checked in or saved. It would check if the material feild was utilzed or forgotten at Default.
share if there are any good iLogic functions that we might benefit from.
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Default Template When Using Demote (Create In Place Component)
Mar 6, 2012how to change Default template when using "Demote" in an assembly? Discovered that it was set to use harness.iam as default, want to have standard.
View 1 Replies View RelatedAutoCAD Inventor :: Where Is Configuration For Default Template Measurement Units Stored
Nov 13, 2012Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
AutoCAD Inventor :: Changing Template Files In Existing Part File?
Sep 1, 2011We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
AutoCAD Inventor :: Replace Family Template - Import Part Invalid
Apr 19, 2010I am using inventor 2010 sp1. I have a content center part that I want to replace the family template. I am having problems doing so on random components. Sometimes it lets me and sometimes not. I cannot pinpoint any differences or irregularities between the different library parts.
I am recieving the message indicating..."Import Part Invalid"
Here is my process
Open from content center and save to another folder with or without the same name.
Open Content Editor
right click and replace family template
Recieve this message. "Import Part Invalid"
Note that i made no changes to the file.
AutoCAD Inventor :: Replace Family Template - Import Part Is Invalid
May 13, 2013I've got an error everytime I try to replace a Family template in my Content Center (I work with Inventor 2011).
I try with a simple part. Here's the steps:
1- Create a simple part (cube with Width, Height and Depth parameters)
2- Create an iPart with 12 members
3- Publish the part in the Content Center
4- Modify the part (add a column in table)
5- Save
6- Open Content Center Editor and click on Replace Family Template
Got the error: "Import Part is Invalid".
I tried "Save As" instead of "Save" and got the same result.
AutoCAD Inventor :: Set Default Corner Seam Behavior In Sheet Metal Template?
Jan 10, 2008Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedAutoCAD Inventor :: Include Template Files And Custom Style Libraries In Deployment
May 21, 2013Is there a way to include template files and Custom Style Libraries when creating a Product Design Suite Deployment?
View 3 Replies View RelatedAutoCAD Inventor :: ILogic To Create And Display / Insert Custom IProperties In Template
Aug 25, 2012Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
AutoCAD Inventor :: Custom / User Properties In View Label Of Drawing Template / Style Library
Apr 18, 2012Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
AutoCad :: Import Layers From A Template To Drawing With Different Template
Jun 9, 2011Can you import layers from a template to a drawing with a different template
View 3 Replies View RelatedAutoCAD 2010 :: How To Set Up Default Template (Specified DWT)
Feb 16, 2011So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies View RelatedAutoCad :: Set Default Template For New File Creation?
Apr 30, 2011Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Default Object Name From Template?
Dec 22, 2013ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
AutoCad :: Creating Custom Sheet Set Template
Jul 2, 2012What I am trying to do is create a custom sheetset template that will have ALL my sheets embedded, that way all my notes, details and sheets will always be ready. I would just need to update some text and details from time to time.
These are the steps that I have taken
Created a new sheetset and called it Sheetset Template
In this sheetset template, I created all my sheets and inserted notes/details.
At this point I thought all I would need to do is copy the sheetset file and all by sheets would get copied too, but that was not the case, just the sheetset file was copied and I have to create all the sheets again.
Illustrator :: Converting Label Template From Word To AI
Jan 27, 2013I have a 3M label template that is only offered in a .doc and I need to use it in Illustrator. Is there an (easy) way to do this?
View 7 Replies View RelatedAutoCad :: Setting Default Template Loaded Upon Launch
Jul 6, 2013I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
AutoCAD LT :: 2008 - Update Template Which Has Custom Drawing Properties
Sep 7, 2012I'm trying to update a template which has custom drawing properties. In AutoCad LT 2012 (and obviously full autocad) there is an UPDATEFIELD command which updates the drawing properties.
This command is not known in my version of AutoCad LT 2008. Is there another command I can use?
AutoCAD LT :: Create Template For Drawing With Custom Layers / Text And Dimensions
Mar 18, 2012I need creating a custom template for my drawings with custom layers, text, and dimensions
View 7 Replies View RelatedRevit :: Default Template Not Working
Jul 11, 2013I installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.