ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Converting a default part template to a custom template?
View 1 Replies View RelatedI have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies View RelatedIs there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies View RelatedWhen I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
How do you set the default IDW template used when you select 'New Drawing?'
View 2 Replies View RelatedI am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies View RelatedI need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
how to change Default template when using "Demote" in an assembly? Discovered that it was set to use harness.iam as default, want to have standard.
View 1 Replies View RelatedWhere is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedI installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
when I start Revit it show me this message, I cant find any component in my library components, any solutions?It says: "The default template file you have specified does not exist:"
View 6 Replies View Relatedwhy it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies View RelatedWhen I do file new in 2012, I get the following message:
"the following shorcuts in the search were invalid & ignored ...\..PROFILE-2008.DWT.LNK
Profile.dwt.lnk.
How did these old LDD dwt get into my 3d template and how do I get them out?
I am using Inventor version 2011. I wrote this code which tells me which object defaults style is active
Public Sub ActiveObjectDefaults()
Dim oDocument As DrawingDocument
Set oDocument = ThisApplication.ActiveDocument
Dim DrgStMgr As DrawingStylesManager
Set DrgStMgr = oDocument.StylesManager
Dim ObjDfStyle As Style
Set ObjDfStyle = DrgStMgr.ActiveStandardStyle.ActiveObjectDefaults
MsgBox ObjDfStyle.Name
End Sub
Is it possible to change Active Object Defaults Style by VBA code (see picture below)?
I am trying to change Object Defaults in order to temporarily switch style which use layers with different line weights, and than switch it back. I am new to VBA so I am not sure if I am not trying to do something what is impossible.
Can you have more "Object Defaults" then there is standards?
I ask because everytime I create an additional one and don't have a standard for it to link to and I save the styles it disappears.
Can you have more "Object Defaults" then there is standards?I ask because everytime I create an additional one and don't have a standard for it to link to and I save the styles it disappears.
View 2 Replies View RelatedC3D 2012 SP4
Win 7 Pro
When creating the short cut folder you have the option of using a project template. Instead of browsing for it all the time , can a permanent path on a network be set to look for the project template everytime?
When I create a pipe I want the name to include the pipe size. I set the template in the commands to do this but it is not working.
[URL]
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I am working on the template for my company and making all the styles, labels, etc all consistent to our company standards. This also includes our standards layer names. There are 2 layers that I can't get rid of because they are in use somewhere. C-ROAD-CNTR-STAN and O_PROF-VIEW-TEXT both of these layers do not meet our standards and I can't get rid of them. I went through every style and label to see if I could find where they were being used, but couldn't find them anywhere. I made sure I check the layers for plan, profile, model and section on the display tab of each style.
Since there are so many styles to go through I wanted to try to narrow it down, so I started a new drawing from the template. I purged all of the styles, purged the layers, but they were still there. I set the object layers all to 0. I made sure that every label style default setting was also set to 0. Then I even created all new styles and labels for everything, did a "replace with" and made sure only the new styles were in use, removed the old styles and did a purge. But these layers still are being used somewhere. I tried using LAYTRANS to translate them into the 0 layer, but it doesn't work. There are no blocks in the drawing that are using these layers.
The only command that works to get rid of them is LAYDEL, but doing that makes me concerned that a setting may not have a layer set up for it and it may cause problems in the future.
Attached is a dwg file that I have stripped down as described above. I am using Civil 3D 2012, SP 2. Where a layer is in use? How you can now find where a style is in being referenced?
I would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.
How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?
C3D 2011 32bit
Win XP SP3
For some reason my Subassembly Name Template is not being applied to my subassemblies. This happens in new drawings using the default Imperial Template that ships with the product.
I am showing the settings in a screen capture and the results when I apply them in a screen recording.
[URL]
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies View RelatedI have a drawing what have a template by defect, and i would change the original template by another in the same drawing.
View 9 Replies View RelatedI am running C3D 2013.
Is it a good practice to have several WMS connections already connected to the provider in our standard "dwt" template file? Will this affect the speed or performance of a drawing?
When I open my template I get 2 drawings, can this be fixed?
View 5 Replies View Related