Revit :: Default Template File Invalid
Jun 26, 2011when I start Revit it show me this message, I cant find any component in my library components, any solutions?It says: "The default template file you have specified does not exist:"
View 6 Replies
ADVERTISEMENT
Revit :: Why Stair Type That Works In Default Template Stuffed When Copied To Own Template
Jul 2, 2012I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
Revit :: Default Template Not Working
Jul 11, 2013I installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
Revit :: Project Units Template Default
Nov 16, 2011why it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
AutoCad :: Set Default Template For New File Creation?
Apr 30, 2011Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies View RelatedAutoCAD Inventor :: Could Not Open Default Template File
Jun 27, 2013When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
Xara :: Choose A File And Save It As Default Template
Apr 20, 2012Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies View RelatedAutoCAD Inventor :: Converting Default Part Template To Custom Template?
Jan 23, 2012Converting a default part template to a custom template?
View 1 Replies View RelatedAutoCAD Inventor :: Replace Family Template - Import Part Invalid
Apr 19, 2010I am using inventor 2010 sp1. I have a content center part that I want to replace the family template. I am having problems doing so on random components. Sometimes it lets me and sometimes not. I cannot pinpoint any differences or irregularities between the different library parts.
I am recieving the message indicating..."Import Part Invalid"
Here is my process
Open from content center and save to another folder with or without the same name.
Open Content Editor
right click and replace family template
Recieve this message. "Import Part Invalid"
Note that i made no changes to the file.
AutoCAD Inventor :: Replace Family Template - Import Part Is Invalid
May 13, 2013I've got an error everytime I try to replace a Family template in my Content Center (I work with Inventor 2011).
I try with a simple part. Here's the steps:
1- Create a simple part (cube with Width, Height and Depth parameters)
2- Create an iPart with 12 members
3- Publish the part in the Content Center
4- Modify the part (add a column in table)
5- Save
6- Open Content Center Editor and click on Replace Family Template
Got the error: "Import Part is Invalid".
I tried "Save As" instead of "Save" and got the same result.
Revit :: Default Shared Parameters File?
Feb 3, 2014Looking at a standard door type, the Internal Concept Single Door, I've noticed that it has some parameters set as a Shared Parameter?
Where is the shared parameters file for this?
I'm setting up an office template for use of these, and losing the default functionality is not wanted, if necessary I'll integrate the defaults into my own shared parameters file.
Revit :: Default Character Set Of The Exported Type Catalog File
Apr 17, 2012who knows the default character set of the exported type catalog file from revit 2012?
I need to export some families containning chinese parameter names from revit, and found broken character ??? only.
what should I do?
or if any workaround for me to display the context correctly? I'm using notepad ++ rather than notepad.
Revit :: Top Constraint Is Invalid For The Level
Jul 30, 2008I've been trying to construct a wal with the start leve being the ground floor and the finishing Level being First floor level. every time i try to do this tho i get this message occur
"Top Constraint is invalid for the Level."
AutoCAD 2010 :: How To Set Up Default Template (Specified DWT)
Feb 16, 2011So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies View RelatedAutoCAD Civil 3D :: Get Default Object Name From Template?
Dec 22, 2013ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
VideoStudio :: Invalid File Error
May 9, 2012I'm trying to import files from my GoPro's, i can watch the video's on Quick Time player, but when i go to import them to either V4 or V5 it comes up with a invaild file error.
View 1 Replies View RelatedAutoCad :: When Try To Open DWG File - It Is Invalid
Feb 11, 2012I have a .dwg file that I believe is corrupt, because when I try to open it in Autocad it says that it is invalid. Is there any way to recover this file?
View 9 Replies View RelatedAutoCAD Inventor :: Template Files Reverting To Default
Aug 5, 2013We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
AutoCAD Inventor :: Set Default IDW Template Used / When Select New Drawing
Dec 16, 2013How do you set the default IDW template used when you select 'New Drawing?'
View 2 Replies View RelatedAutoCAD Inventor :: Reduce Size Default Template?
May 21, 2012I am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies View RelatedAutoCad :: Setting Default Template Loaded Upon Launch
Jul 6, 2013I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
Photoshop :: Invalid PSD File - CS6 Stopped Working?
Jun 27, 2013For the past three days i have been working on a drawing in photoshop CS6. I was working on it this morning and it went just fine. I save it and when i quite the program a message appeared saying Photoshop has stoped working.
The file was still in the place i saved it, everything seemed ok so i took a brake. A few hours later i tried to open it again and a message apeared saying Photoshop could not open the file because it is not a valid Photoshop file I have tried to open previous .psd files and they worked just fine.
AutoCAD 2010 :: Drawing File Invalid
Sep 1, 2009Size of Drawing file is 4.33 mb. But Can not Open. A message appears " Drawing File Invalid"
Can I Retrieve the data.? No backup file is available in my system. I have tried with recovery tool but unable to get original data
for Any other option .
AutoCAD 2013 :: How To Open Invalid File
May 3, 2012im new to autocad and what i to know is, is there any way to open a invalid file on autocad?
View 3 Replies View RelatedLightroom :: 4.1 DMG Update File Has Invalid Checksum
Jun 17, 2012I've downloaded the file on the download page 9 times, and get the same error each time I try mounting it in OSX 10.6.8. My machine has the right specs. The downloaded file size is always 411.7 mb, but the download page says it should be 392.7 mb.
View 2 Replies View RelatedAutoCAD Inventor :: Template - Unable To Save New Settings As Default
Oct 26, 2012I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
Photoshop :: Error / Could Not Initialize Because Preferences File Was Invalid
May 31, 2013When I try to open the program, it gives me the following error: "Could not initialize photoshop because the preferences file was invalid (it has been deleted). I've uninstalled and re-installed the program.
View 3 Replies View RelatedCorelDRAW X5 :: Saving Files - File Name Is Invalid In Certain Folders
Jun 24, 2013I'm Testing77. I'm a graphic designer for screen printing, formerly a screen printer, and I work primarily in CorelDrawx5. I work on a MacbookPro, where I run Parallels and then XP in order to operate the windows-only program on my MBP.
I'm posting to publicize an error I've been running into as far as saving cdr files goes. Again, I run x5 through parallels, and there a grey area between what characters you can use in file names on Mac as opposed to Windows. I can use a "/" on a mac file name, and not on windows for example. In any event, I get a 'save drawing' error saying the file name is invalid in certain folders. I have a 'corel files' folder that contains primarily registration mark template files, a folder for my companies files, 10-15 folders for my most-frequent clients, and a "Misc" folder that contains subfolders for less-frequent clients. I tend to get the error message in the subfolders of the Misc folder. The message does pop up in other folders.
Technical side: Instead of simply saving to c:/documents and settings/~username/my documents/corel files/~my clients files/FILENAME.cdr I have to go through a "Z:/" drive (what windows thinks the mac is) so the directory I actually save to looks like this: \psfHomeDocumentscorel files/~my clients files/FILENAME.cdr. Effectively directly linking the "Documents" folder in Mac to the My Documents folder on windows.
AutoCAD Map 3D :: Exporting Polylines To Polygons - Invalid SHP File
Oct 17, 2007While exporting polylines to polygons as an autocad shp file I get an error when trying to open the file in ArcExplorer 9.2 Java edition. The error code in an invalid field length in the dbf file. Is it specific to Autocad map export issues. The attribute table is an Access file (link template).
View 7 Replies View RelatedAutoCAD Inventor :: Unnamed File Contains Invalid Path?
Jul 11, 2006When working with an IAssembly I keep getting an error message that reads "an unnamed file contains an invalid path." I cannot seem to find a problem anywhere.
View 6 Replies View RelatedAutoCAD Inventor :: Default Template When Using Demote (Create In Place Component)
Mar 6, 2012how to change Default template when using "Demote" in an assembly? Discovered that it was set to use harness.iam as default, want to have standard.
View 1 Replies View Related