Revit :: Why Stair Type That Works In Default Template Stuffed When Copied To Own Template
Jul 2, 2012
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
View 2 Replies
ADVERTISEMENT
Feb 22, 2013
Just Starting with new Revit LT 2013(The Comparison chart from Autodesk lists the differences between LT and Full Revit as no Massing, Rendering and no multi user collaboration) Everything else should be the same!
I'm using 'LT_USI_Residential-Default' Template for my project.In the Stair Family, I have a few options, but not the '7"max riser 11" tread' stair that is available in other Templates.Is there a way to bring that Stair Family into the Template?
Maybe I don't know the 'workarounds', but none of the Stairs available in the above Template have changeable 'width' parameter under 'Dimensions' in the properties window.No matter what I do, all Stairs are first drawn 4' wide, and then I have to edit the width, but it's a pain since I get bunch of error messages and Landings often can't complete and needed to be manually added later.Even though the Type Properties list all stairs widths as 3' min., they still all draw as 4'.What's wrong with these Stairs?
View 3 Replies
View Related
Jan 23, 2012
Converting a default part template to a custom template?
View 1 Replies
View Related
Jul 11, 2013
I installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
View 3 Replies
View Related
Jun 26, 2011
when I start Revit it show me this message, I cant find any component in my library components, any solutions?It says: "The default template file you have specified does not exist:"
View 6 Replies
View Related
Nov 16, 2011
why it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
View 3 Replies
View Related
Feb 14, 2012
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
View 1 Replies
View Related
May 20, 2013
Is the any way of saving settings for in particular base level and top level. Always defaults to the current view level for base - can this be overriden permanently. Same for upper level - what lvel does it automatically default. Stair by sketch often involves trial and error and redoing it each time because once done you cant change the levels, rise, width or change the number of segments governed by the path. It would be nice to not have to reset levels each time.
View 1 Replies
View Related
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
Oct 4, 2012
Our customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies
View Related
Feb 16, 2011
So that when AutoCAD starts up, a new .dwg file is started, using my specified dwt. file as a template.
View 9 Replies
View Related
Apr 30, 2011
Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
View 2 Replies
View Related
Dec 22, 2013
ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 1 Replies
View Related
Jun 27, 2013
When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
FDS Ultimate 2013
View 4 Replies
View Related
Aug 5, 2013
We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
View 7 Replies
View Related
Apr 20, 2012
Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies
View Related
Dec 16, 2013
How do you set the default IDW template used when you select 'New Drawing?'
View 2 Replies
View Related
May 21, 2012
I am trying to reduce the size of the a size title block, but I have not been able to. How would you resize it?
View 3 Replies
View Related
Jul 6, 2013
I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
View 3 Replies
View Related
Oct 26, 2012
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
View 4 Replies
View Related
Mar 6, 2012
how to change Default template when using "Demote" in an assembly? Discovered that it was set to use harness.iam as default, want to have standard.
View 1 Replies
View Related
Nov 13, 2012
Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
View 6 Replies
View Related
Mar 14, 2012
I am wondering if there is a way to insert a template that I have created into a project that already exists. I have created a template for the company I work for and we already have all of our plans for our homes drawn up. So I either have to redraw these homes starting with the new template or if it is possible load in a template.
View 1 Replies
View Related
Jan 10, 2008
Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies
View Related
Sep 23, 2013
My template don't have Floor Plan and Level.
View 1 Replies
View Related
Dec 5, 2012
i want to create a basic house template. how do i do this so it will keep all walls i create and all familys i load. i have made a template before but when i open a project using this template none of the walls , floor, of families are present.
View 2 Replies
View Related
May 19, 2011
I need to tag my roof soffits, exactly the same way I tag my ceilings to show the height. At present, I have tried to use a ceiling, roof, and multicategory tag to tag a roof soffit and it does not work!!!
Autodesk, how do you tag a roof soffit? send me a roof soffit tag.rfa to start from? The category does not exist in the OOTB family templates.
View 4 Replies
View Related
Jun 17, 2011
Is it possible to edit a Revit schedule template? We need the schedule to be vertical not horizontal.
View 4 Replies
View Related
Jun 19, 2012
Is it possible to filter a selection (6 categories checked instead of 10) and make it as a view template?
So that next time I open up this view, only these 6 categories checked in the filter instead of re-doing the filtering again?
View 2 Replies
View Related
Jul 26, 2013
I have adjusted my North Elevation (using View Graphics) exactly the way I’d like it to look in elevation, and would now like to apply those same visibility adjustments to my other elevations. Is there a way I can save that view as a template and apply to other elevations, or do I instead need to create a view template, make all the adjustments to that template, then apply the template to the elevations?
View 3 Replies
View Related
Oct 8, 2012
In customizing a sheet template, I entered into a "Schedule: Revision Schedule". I made the minor adjustments, but can not get back to the sheet template.
The 'Project Browser' only has "Schedules" under 'Views'. (refer to attached image) I know the rest of the content from the sheet (eg. titleblock) are still in the file, as it still is present when I "Load into Project".
How do you exit the schedule editor from a sheet template file?
View 3 Replies
View Related
