AutoCAD Inventor :: Template Files Reverting To Default
Aug 5, 2013
We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
One of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
Has seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
When I try to do a make components I get this error "Could not open default template file." All the Standard.xxx files are the designated folder and named appropriately. Plus I just used this command earlier today. I did do a "rebuild all" but I'm not 100% sure the problem came directly after that.
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
Is there a way to set the default template for new file creation? I made a template file but it keeps defaulting to another location for templates. As a matter of fact, I would love for it to not even ask me what template file I want to use, I just want it to use the one I made.
ObjectId slgId = SampleLineGroup.Create("My SampleLineGroup", alignment.ObjectId); I don ´t want ask to user the sampleLineGroup name by prompt. I want to create a new sample line group which its name was default template name.
Autocad Civil 3D 2014 +SP1 Quad Core Intel i7 3770-cpu 3.40Ghz. ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd 32gb RAM 1600 Mhz. nVidia Quadro 2000. Win 7 Pro 64bit
I am having an odd issue with the windows default for opening files for Inventor. I previously had the full Autodesk 2013 software suite. A couple of months ago I did the upgrade and installed the Autodesk 2014 software suite.
My issue is now when attempting to open files the default is to open them in Inventor 2013 (still installed on my machine).
I went through the windows default programs options and browsed/selected the Inventor 2014 .exe application. However, this does not add the 2014 application to the list as it seems 2013 over rides it.
I tried to manually changing .ipt/.iam/.stp etc. file types from Inventor 2013 to Inventor 2014, yet am still unable to have the 2014 application added to the potential list of default programs to open with.
One solution would appear to be to un-install the 2013 suite, is there any other way to fix this problem? It is nothing crucial, yet very annoying.
another way that I can get the default program altered to use Inventor 2014? I have attached pictures showing my steps of attemping to change the file association for a .stp file. However, this does not work. I even brought this issue to my company's IT perssonnel and they were unsure.
I am working on a PLTW image that includes Inventor. We had an issue with our original image and had to rebuild it. Now we are running into an issue with setting the Default Content Center Files path. In our profile (DefProf) we use to create the Default profile the path is set to
"%USERPROFILE%DocumentsInventorContent Center FilesR2013".
However, when we use this to create the Default Windows Profile and log in as a user (Test01) the path changes to
"C:UsersDefProfDocumentsInventoryContent Center FilesR2013".
I installed, removed and reinstalled Revit 2014 3 times but still no success. When I start Revit 2014 and try to start a new project by clicking on new and selecting any of the available templates like Architectural, Construction, Structural, or Mechanical, Revit gives me a message saying - Failed to open Document'. If I start selecting 'none' then the default project that starts has no elevation marks and no elevation views. Also the system families are not loaded properly as I get just one wall by the name of 'Basic Wall 1' and no other wall types are present. If I put an elevation marker to create an elevation view, there are no levels present and so how to I add further levels?
I have tried various stuffs to get default templates so that Revit works normally but it all failed. Nothing seems to work and I can't start a new project because the 'none' template has nothing in it and I don't want to create a new wall type every time.
when I start Revit it show me this message, I cant find any component in my library components, any solutions?It says: "The default template file you have specified does not exist:"
why it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
Whenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
my problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop windows 7 64bit 4gb ddr2 ram intel GMA 4500m graphic with latest driver
I have created a drawing template for survey and I need to distribute it to the field crews and eventually put it on the server. The template contains description keys, point styles, point label styles, custom point file formats, figure styles, figure prefix database, line code sets, etc.
How do I transfer all the external files along with the drawing template? Is it a straight forward copy? Etransmit doesn't seem to do it unless additional files are manually included, but I can't figure out what files to include or where they live.