Everytime I want to open idw file only in one folder, it comes with dwg and idwfiles. I have to identify the idw files from many dwg files, sometime I just opened dwg file due to the same name with the idw file. (For project purpose, I need to save idw and dwg file in the same folder).
I hope I can open idw files only as I choose to open iam and ipt only, and remove *.dwg from File of types (*.dwg; *.idw).
I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedHow can I open or export or inport BXF File in autocad 2012???
View 9 Replies View RelatedHow do i open a SiteComp file .scj into C3D 2012?
View 8 Replies View Relatedhow can i insert open street map file (osm) in autocad civil 3d 2012.
View 5 Replies View RelatedUsing AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
I recently updated computer and installed inventor 2012 and the updates. Loaded ok
Opened project and tried to place parts from content center, nothing happened. I mean nothing. Could not even open configure Content center library in projects. I am running windows 7, 32 bit. window
I loaded it to my laptop and it works fine.
can you open inventor pro 2012 files on inventor pro 2009?
View 2 Replies View RelatedI had to work in Revit architect 2012 and today i have to open this file again. The program is show message is
Autodesk Revit Architect 2012
Buil : 20110916_2132(x64)
License unavailable. A license is required to run Autodesk Revit Architect 2012 on this computer.
But this file i have to tried to open in another machine is can open. Do i need to recovery my Revit program or re-install.
I am copying chunks of code from the My First Plugin tutorial and am using the code that opens Inventor to start the form. I have both Inventor 2012 and 2013 installed on my system. I have gone in to the properties and changed the .dll reference file to read out of the bin/PublicAssemblies folder in 2013, however, when I run my Windows Form, it will open Inventor 2012 instead.
View 2 Replies View RelatedI have always used step files to save back to previous releases but i cant seem to get them to open in 2012, I get the attached message
I cant see any version options when saving the sat or stp file, also dwg export, import doesnt work either
I can see other people are still able to do this, is there a setting somewhere?
Since we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files. The translator shows as 'On demand' and when i save copy as the 'options' button is inactive. We just get the standard error 'Problems encountered while saving the document'.
I see lots of old posts but nothing relating specifically to stp files.
Inventor 2010
How can I open Max 2012 file in Max 2009 version software?
View 1 Replies View Relatedcan 2012 open a flame 2013 file archive
View 2 Replies View RelatedI am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012? I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.
View 3 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedI have a question regarding display problems when I import my Inventor assembly into Showcase and try to apply ray tracing. The assembly file is now missing some part and does not display at all. The assembly file is model that has been designed with frame generator however some of these framed generated parts just don't display. The strange this is they do display in other less desired formats such as shaded etc but not when ray tracing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
What is the risk Migrating Inventor 2009 files to Inventor 2012?
Do i have to migrate the Inventor 2009 files to 2010 and up to 2012?
I have recently installed Inventor Professional 2012 Student Version, and I'm unable to create a new file, as the program crashes as I try to do so.
After starting Inventor, I select New than Standard.ipt. The file starts loading, the status of the loading process can be seen in the bottom left corner, than the "Open Documets in Session" counter in the bottom right corner changes from 0 to 1, as it should, I guess. And than, the program freezes. Sometimes, a message appears after several minutes that an error has occured, and that I should send an error report to Autodesk (which I did); but sometimes, no message appears at all, it simply crashes.
My computer specs are: Intel Core 2 @1,86 GHz, 2 GB RAM, NVidia GeForce 9800 GTX, 60 GB free space, Windows Vista (hotfix installed) Not a powerhouse, but I think it should be able to start a file properly I think, if I understand the system requirements correctly.
inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
View 3 Replies View RelatedI would like to report on a latest problem i encountered.
I dunno why, but when it started to run a part fill analysis, Inventor prompted me that it ""Failed to create a new study file".
I tried restarting inventor and still, nothing happened. Moreover, i tried another file and it worked. How come for this part it didnt?
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies View RelatedI was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
I tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View Relatedif i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedI have an Inventor dwg file that I corrected some drawing errors, checked it into the Vault and every time I try to open it,
my system crashes and a Diag Box appears saying that I should sent this info to Autodesk. I have filled it out on four different occasions but have heard anything back. how to get this drawing to open?
I can't open a new idw file. I get this massage when I try to open an idw file : " the template file you are using to create the new document needs to be migrated. please open it and explicitly save it before using it to create any more documents."
View 1 Replies View RelatedIn the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedHaving problems trying open/convert a *.PRT file. ny "switches" in the OPEN/OPTIONS I may have to change other than default settings?
View 6 Replies View Related